doc. Ing.
Radoslav Cipín
Ph.D.
FEKT, UVEE – docent
+420 54114 6736
cipin@feec.vutbr.cz
Publikace
2020
CIPÍN, R.; TOMAN, M.; PROCHÁZKA, P.; PAZDERA, I.; MIKLÁŠ, J. Approximation of Battery Transfer Function Using Neural Network. In ECS. ECS Transactions. 2020.
s. 351-356. ISSN: 1938-5862.
Detail | WWWCIPÍN, R.; TOMAN, M.; PROCHÁZKA, P.; PAZDERA, I.; MIKLÁŠ, J. Approximation of Alkaline Battery Transfer Function Using Neural Network. 2020.
s. 1-3. ISBN: 978-80-214-5889-5.
DetailTOMAN, M.; CIPÍN, R.; VOREL, P. Thermal Model of Small Li-ion Battery Pack with Case Made of Phase Change Material. In ECS. ECS Transactions. 2020.
s. 365-371. ISSN: 1938-5862.
Detail | WWWTOMAN, M.; CIPÍN, R.; VOREL, P. Thermal Model of Li-ion Battery Pack in PCM Case. 21st Advanced Batteries, Accumulators and Fuel Cell. 1. 2020.
s. 181-183. ISBN: 978-80-214-5889-5.
DetailNOVOTNÁ, V.; CIPÍN, R.; ČERVINKA, D., STÁREK, Z., PEŠL, M. Numerical Modeling of Electroporation Process Using Endocardial Catheter. In 8th European Medical and Biological Engineering Conference. IFMBE PROCEEDINGS. Switzerland: Springer Nature, 2020.
s. 896-904. ISBN: 978-3-030-64609-7. ISSN: 1680-0737.
Detail | WWW2019
CIPÍN, R.; TOMAN, M.; PROCHÁZKA, P.; PAZDERA, I. Methods of SOC Estimation of Li-ion Batteries. In 20th International Conference on Advanced Batteries, Accumulators and Fuel Cells, ABAF 2019. ECS Transactions. 2019.
s. 1-6. ISBN: 9781607685395. ISSN: 1938-5862.
Detail | WWWCIPÍN, R.; TOMAN, M.; PROCHÁZKA, P.; PAZDERA, I. Estimation of SOC of Li-ion Batteries. In Advanced Batteries Accumulators and Fuel Cells – 20th ABAF. 1. 2019.
s. 172-174. ISBN: 978-80-214-5774-4.
DetailTOMAN, M.; VOREL, P.; CIPÍN, R.; PROCHÁZKA, P. Identification of Induction Motor Parameters Considering Sensitivity Analysis of Measured Quantities. In 2019 International Conference on Electrical Drives & Power Electronics (EDPE) Proceedings. 2019.
s. 298-302. ISBN: 978-1-7281-0388-4.
DetailTOMAN, M.; CIPÍN, R.; VOREL, P. Výpočet optimálního spřaženého toku pro dosažení maximální účinnosti asynchronního motoru provozovaného v širokém rozsahu otáček a momentu. In XXXVI. celostátní konference o elektrických pohonech, Sborník. Plzeň: Česká elektrotechnická společnost, ÚOS Elektrické pohony, 2019.
s. 1-6. ISBN: 978-80-02-02860-4.
DetailCIPÍN, R.; TOMAN, M.; PROCHÁZKA, P.; PAZDERA, I. Identification of Li-ion Battery Model Parameters. In Electrical Drives & Power Electronics (EDPE) Proceeding. 1. 2019.
s. 225-229. ISBN: 978-1-7281-0388-4.
DetailTOMAN, M.; CIPÍN, R.; VOREL, P.; ČERVINKA, D. Dynamic Thermal Model of a Cylindrical Battery Cell. In Advanced Batteries Accumulators and Fuel Cells – 20th ABAF. 1. 2019.
s. 218-220. ISBN: 978-80-214-5774-4.
DetailTOMAN, M.; CIPÍN, R.; VOREL, P.; ČERVINKA, D. Dynamic Thermal Model for Cylindrical Battery Cell Temperature Modeling. In 20th International Conference on Advanced Batteries, Accumulators and Fuel Cells, ABAF 2019. ECS Transactions. 2019.
s. 1-7. ISBN: 9781607685395. ISSN: 1938-5862.
Detail | WWWMARTIŠ, J.; VOREL, P.; CIPÍN, R. Netradiční blokující měnič s impulzním transformátorem o výkonu 12kW. In XXXVI. Celostátní konference o elektrických pohonech. Plzeň: 2019.
s. 1-6. ISBN: 978-80-02-02860-4.
DetailPROCHÁZKA, P.; PAZDERA, I.; CIPÍN, R. Hybrid Tree Harvester Machine with Battery Powered Hydro-electric Drive. In 20th International Conference on Advanced Batteries, Accumulators and Fuel Cells, ABAF 2019. ECS Transactions. 2019.
s. 1-6. ISBN: 9781607685395. ISSN: 1938-5862.
Detail | WWWCIPÍN, R.; PROCHÁZKA, P.; PAZDERA, I.; MIKLÁŠ, J. Analysis of Power Transistor Switching process. In 2019 International Conference on Electrical Drives & Power Electronics (EDPE) Proceedings. 2019.
s. 298-302. ISBN: 978-1-7281-0388-4.
Detail2018
TOMAN, M.; CIPÍN, R.; VOREL, P. Thermal Network for Battery Cell Temperature Modeling. ECS Transactions, 2018, roč. 87, č. 1,
s. 285-290. ISSN: 1938-5862.
DetailTOMAN, M.; CIPÍN, R.; VOREL, P. Thermal Model of Cylindrical Battery Cell. In Advanced Batteries Accumulators and Fuel Cells – 19th ABAF. Prvni. Brno: Brno University of Technology, 2018.
s. 187-189. ISBN: 978-80-214-5651-8.
DetailCIPÍN, R.; TOMAN, M.; PROCHÁZKA, P.; PAZDERA, I. Nonlinear Equivalent Circuit of Induction Machine. In Proceedings of the 2018 18th International Conference on Mechatronics – Mechatronika (ME). 1. 2018.
s. 149-153. ISBN: 978-80-214-5543-6.
Detail | WWWCIPÍN, R. Modely asynchronních strojů. Brno: VUTIUM, 2018.
s. 1-35.
DetailCIPÍN, R.; TOMAN, M.; PROCHÁZKA, P.; PAZDERA, I. High-Frequency Model of Battery in Form of Transfer Function. ECS Transactions, 2018, roč. 87, č. 1,
s. 269-274. ISSN: 1938-5862.
DetailCIPÍN, R.; TOMAN, M.; PROCHÁZKA, P.; PAZDERA, I. High-Frequency Model of Alkaline Battery in Form of Transfer Function. In Advanced Batteries Accumulators and Fuel Cells – 19th ABAF. Prvni. Brno: Brno University of Technology, 2018.
s. 1-3. ISBN: 978-80-214-5651-8.
DetailTOMAN, M.; VOREL, P.; CIPÍN, R. Thermal Networks Respecting Asymmetric Cooling of Electrical Machine Parts. In Proceedings of the 2018 18th International Conference on Mechatronics – Mechatronika (ME). 1. 2018.
s. 516-521. ISBN: 978-80-214-5543-6.
Detail | WWWPROCHÁZKA, P.; CIPÍN, R.; PAZDERA, I.; TOMAN, M. Analýza vlastností akumulátorů OLIFE. 2018.
s. 1 (1 s.).
DetailMACH, M.; CIPÍN, R.; TOMAN, M.; HÁJEK, V. Impact of Number of Rotor Slots on Performance of Three-Phase and Single-Phase Induction Machines. In IEEE EEEIC 2018. Palermo, Itálie: IEEE EEEIC 2018, 2018.
s. 835-840. ISBN: 978-1-5386-5185-8.
Detail | WWWPROCHÁZKA, P.; PAZDERA, I.; CIPÍN, R.; VOREL, P.; KNOBLOCH, J. Battery powered mini-excavator. In Advanced Batteries Accumulators and Fuel Cells – 19th ABAF. První. Brno: Brno University of Technology, 2018.
s. 1-3. ISBN: 978-80-214-5651-8.
DetailPAZDERA, I.; PROCHÁZKA, P.; CIPÍN, R.; CTIBOR, J. Synchronous Machine Model and Equivalent Circuits Based on Hybrid Parameters of Two–Port Network. In Proceedings of the 2018 18th International Conference on Mechatronics – Mechatronika (ME). 1. 2018.
s. 120-125. ISBN: 978-80-214-5543-6.
Detail | WWWPROCHÁZKA, P.; PAZDERA, I.; CIPÍN, R.; VOREL, P.; KNOBLOCH, J. Battery Powered Mini-Excavator. ECS Transactions, 2018, roč. 87, č. 1,
s. 343-347. ISSN: 1938-5862.
DetailTOMAN, M.; VOREL, P.; CIPÍN, R.; MACH, M. Algorithm for IM Optimal Flux Determination Respecting Nonlinearities and Thermal Influences. In Conference Proceedings 2018 IEEE International Conference on Environment and Electrical Engineering and 2018 IEEE Industrial and Commercial Power Systems Europe (EEEIC / I&CPS Europe). Palermo, Italy: 2018.
s. 1046-1050. ISBN: 978-1-5386-5185-8.
Detail | WWWKNOBLOCH, J.; RUBEŠ, O.; CIPÍN, R. DC-bus Capacitor Sizing in the Back-to-Back Converter. In Conference proceedings 2018 IEEE International Conference on Environment and Electrical Engineering and 2018 IEEE Industrial and Commercial Power Systems Europe (EEEIC / I&CPS Europe). Palermo, Italy: Institute of Electrical and Electronics Engineers Inc., 2018.
s. 1934-1937. ISBN: 978-1-5386-5185-8.
Detail2017
PROCHÁZKA, P.; CIPÍN, R.; VOREL, P.; MARTIŠ, J. Výzkumné a vývojové práce, spočívající ve vývoji laboratorního funkčního vzorku navazující na přechozí smluvní vývoj. 2017.
s. 1-2.
DetailPROCHÁZKA, P.; CIPÍN, R.; VOREL, P.; MARTIŠ, J. Výzkumné a vývojové práce, spočívající ve vývoji laboratorního funkčního vzorku. 2017.
s. 1-2.
DetailTOMAN, M.; VOREL, P.; CIPÍN, R. Thermal Calculation of Li- Ion Battery Pack. In Conference proceeding ABAF. Brno: 2017.
s. 1-3. ISBN: 978-80-214-5529- 0.
DetailTOMAN, M.; VOREL, P.; CIPÍN, R. Thermal Calculation of Li-Ion Battery Pack. ECS Transactions, 2017, roč. 81, č. 1,
s. 1-6. ISSN: 1938-5862.
DetailTOMAN, M.; VOREL, P.; CIPÍN, R.; MACH, M. Application of Acceleration Method for Evaluation of Induction Motor Torque-Speed Characteristics. In Conference Proceedings - 2017 IEEE International Conference on Environment and Electrical Engineering and 2017 IEEE Industrial and Commercial Power Systems Europe. Milan, Italy: Institute of Electrical and Electronics Engineers Inc., 2017.
s. 1085-1088. ISBN: 978-1-5386-3916-0.
Detail | WWWMACH, M.; CIPÍN, R.; TOMAN, M.; HÁJEK, V. Impact of Manufacturing Proces on Optimal Shape of Induction Machine Slots. In Environment and Electrical Engineering and 2017 IEEE Industrial and Commercial Power Systems Europe (EEEIC / I&CPS Europe), 2017 IEEE International Conference on. Milán: Environment and Electrical Engineering, 2017.
s. 483-487. ISBN: 978-1-5386-3917-7.
Detail | WWWTOMAN, M.; VOREL, P.; CIPÍN, R.; MACH, M. Identification of Induction Machine Electromagnetic Parameters for a Wide Range of Frequency and Flux Density. In Mechatronics 2017. Advances in Intelligent Systems and Computing. 1. Cham: Springer International Publishing, 2017.
s. 289-295. ISBN: 978-3-319-65959-6. ISSN: 2194-5357.
Detail | WWWKNOBLOCH, J.; MARTIŠ, J.; CIPÍN, R.; NOUMAN, Z. Test Stand for Obtaining Power Transistors Switching Characteristics During Aging. In Conference Proceedings 2017 IEEE International Conference on Environment and Electrical Engineering and 2017 IEEE Industrial and Commercial Power Systems Europe. Milán, Italská republika: 2017.
s. 393-397. ISBN: 978-1-5386-3916-0.
Detail | WWWKNOBLOCH, J.; CIPÍN, R.; PROCHÁZKA, P. Measurement of High-Frequency Currents in Power Electronics. In Advances in Intelligent Systems and Computing. Advances in Intelligent Systems and Computing. 1. Cham: Springer International Publishing AG 2018, 2017.
s. 578-585. ISBN: 978-3-319-65959-6. ISSN: 2194-5357.
Detail | WWWPROCHÁZKA, P.; MIKLÁŠ, J.; PAZDERA, I.; PATOČKA, M.; KNOBLOCH, J.; CIPÍN, R. Measurement of Power Transistors Dynamic Parameters. In MECHATRONICS 2017. Springer, 2017.
s. 571-577. ISBN: 978-3-319-65959-6.
DetailCIPÍN, R.; KNOBLOCH, J.; PROCHÁZKA, P.; PAZDERA, I. Dynamic Model of Wye Connected Induction Machine. In Mechatronics 2017 Recent Technological and Scientific Advances. Brno: Springer Verlag, 2017.
s. 194-201. ISBN: 978-3-319-65959-6.
DetailCIPÍN, R.; MACH, M.; TOMAN, M.; KNOBLOCH, J. Measurement and evaluation of DC motor starting torque. In Conference Proceedings - 2017 17th IEEE International Conference on Environment and Electrical Engineering and 2017 1st IEEE Industrial and Commercial Power Systems Europe. Milan, Italy: Institute of Electrical and Electronics Engineers Inc., 2017.
s. 1-5. ISBN: 978-1-5386-3917-7.
DetailCIPÍN, R.; TOMAN, M.; KNOBLOCH, J. Estimation of Primary Cell Parameters. In Conference proceeding ABAF. Brno: 2017.
s. 1-3. ISBN: 978-80-214-5529- 0.
DetailCIPÍN, R.; TOMAN, M.; KNOBLOCH, J. Estimation of Alkaline Battery Parameters. ECS Transactions, 2017, roč. 81, č. 1,
s. 1-6. ISSN: 1938-5862.
DetailPAZDERA, I.; PROCHÁZKA, P.; HUTÁK, P.; CIPÍN, R.; CTIBOR, J.; PATOČKA, M. Induction Machine Models and Equivalent Circuits Based on Hybrid Parameters of Two–Port Network. In Mechatronics 2017. Advances in Intelligent Systems and Computing. Springer International Publishing AG 2018, 2017.
s. 202-210. ISBN: 978-3-319-65959-6. ISSN: 2194-5357.
Detail | WWW2016
VYROUBAL, P.; KAZDA, T.; MAXA, J.; VONDRÁK, J.; SEDLAŘÍKOVÁ, M.; TICHÝ, J.; CIPÍN, R. 3D Modelling and Study of Electrochemical Characteristics and Thermal Stability of Commercial Accumulator by Simulation Methods. INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2016, č. 11,
s. 1938-1950. ISSN: 1452-3981.
Detail | WWWCIPÍN, R.; PROCHÁZKA, P.; TOMAN, M.; MARTIŠ, J.; ČERVINKA, D. Automatic Li- ion Battery Measuring Stand. In International conference 17th ABAF. 2016.
s. 1-4. ISBN: 978-80-214-5384- 5.
DetailToman, Cipín, Červinka, Vorel, Procházka. Li- ion battery charging efficiency. In International conference 17th ABAF. Brno: 2016.
s. 28-31. ISBN: 978-80-214-5384- 5.
DetailCIPÍN, R.; PROCHÁZKA, P.; TOMAN, M.; MARTIŠ, J.; ČERVINKA, D. Automatic Li- ion Accumulator Measuring Stand. ECS Transactions, 2016, roč. 74, č. 1,
s. 77-83. ISSN: 1938-5862.
DetailMARTIŠ, J.; VOREL, P.; CIPÍN, R.; PROCHÁZKA, P.; TOMAN, M. Compact High-efficiency Li-Ion Fast- charger. ECS Transactions, 2016, roč. 74, č. 1,
s. 1-6. ISSN: 1938-5862.
DetailMARTIŠ, J.; VOREL, P.; CIPÍN, R.; PROCHÁZKA, P.; TOMAN, M. Compact High-efficiency Li-Ion Fast- charger. In International conference 17th ABAF. 2016.
s. 10-11. ISBN: 978-80-214-5384- 5.
DetailPROCHÁZKA, P.; ČERVINKA, D.; MARTIŠ, J.; CIPÍN, R.; VOREL, P. Li- ion Battery Deep Discharge Degradation. In International conference 17th ABAF. 2016.
s. 12-13. ISBN: 978-80-214-5384- 5.
DetailPROCHÁZKA, P.; ČERVINKA, D.; MARTIŠ, J.; CIPÍN, R.; VOREL, P. Li- Ion Battery Deep Discharge Degradation. ECS Transactions, 2016, roč. 74, č. 1,
s. 1-4. ISSN: 1938-5862.
DetailTOMAN, M.; VOREL, P.; CIPÍN, R.; ČERVINKA, D.; PROCHÁZKA, P. Li- ion battery charging efficiency. ECS Transactions, 2016, roč. 74, č. 1,
s. 1-4. ISSN: 1938-5862.
DetailČERVINKA, D.; MARTIŠ, J.; KNOBLOCH, J.; CIPÍN, R.; PROCHÁZKA, P. Výzkum laboratorního vzorku vysokonapěťového zdroje pro střídavou elektroporaci. 2016.
s. 1-5.
Detail2015
PROCHÁZKA, P.; PAZDERA, I.; CIPÍN, R.; MARTIŠ, J.; VOREL, P. NTE17-Návrh zapojení a testovací verze soustavy budicí měnič, generátor a zátěž. 2015.
s. 1-2.
DetailVOREL, P.; PROCHÁZKA, P.; PAZDERA, I.; ČERVINKA, D.; MARTIŠ, J.; CIPÍN, R. Possibilities of trolleybus transportation energy demand reduction. ECS Transactions, 2015, roč. 70, č. 1,
s. 301-304. ISSN: 1938-5862.
DetailMARTIŠ, J.; VOREL, P.; PROCHÁZKA, P.; CIPÍN, R.; PAZDERA, I.; ČERVINKA, D. Fast-discharging apparatus 0 - 400 A / 2 - 4.2 V for testing of lithium cells. ECS Transactions, 2015, roč. 70, č. 1,
s. 47-51. ISSN: 1938-5862.
DetailMARTIŠ, J.; VOREL, P.; CIPÍN, R.; PROCHÁZKA, P.; PAZDERA, I. Zvyšování výkonu blokujících spínaných zdrojů. In Sborník XXXIV. celostátní konference o elektrických pohonech. Plzeň: Česká elektrotechnická společnost, 2015.
s. 141-146. ISBN: 978-80-02-02592- 4.
DetailVOREL, P.; CIPÍN, R.; PROCHÁZKA, P.; MARTIŠ, J.; ČERVINKA, D.; PAZDERA, I. Aplikační možnosti ultrakapacitorů a akumulátorů LiFePO4 v trolejbusové síti Dopravního podniku města Brna. In Sborník XXXIV. celostátní konference o elektrických pohonech. Plzeň: Česká elektrotechnická společnost, 2015.
s. 88-93. ISBN: 978-80-02-02592- 4.
DetailCIPÍN, R.; PROCHÁZKA, P.; PAZDERA, I.; VOREL, P.; MARTIŠ, J. Rozložení vyšších harmonických magnetické indukce v rotoru asynchronního stroje. In Sborník XXXIV. celostátní konference o elektrických pohonech. Plzeň: Česká elektrotechnická společnost, 2015.
s. 12-17. ISBN: 978-80-02-02592- 4.
DetailCIPÍN, R.; PROCHÁZKA, P.; PAZDERA, I. Winding Reconstruction Based on Magnetic Flux Density in Air-gap of IM. In ICRERA 2015 Conference Proceedings. 2015.
s. 322-327. ISBN: 978-1-4799-9981-1.
Detail | WWWVOREL, P.; PROCHÁZKA, P.; PAZDERA, I.; ČERVINKA, D.; MARTIŠ, J.; CIPÍN, R. Possibilities of trolleybus transportation energy demand reduction. In Advanced Batteries Accumulators and Fuel Cells – 16th ABAF. Brno: Brno University of Technology, FEKT, UETE, 2015.
s. 102-105. ISBN: 978-80-214-5109- 4.
DetailMARTIŠ, J.; VOREL, P.; PROCHÁZKA, P.; CIPÍN, R.; PAZDERA, I.; ČERVINKA, D. Fast-discharging apparatus 0 - 400 A / 2 - 4. 2 V for testing of lithium cells. In Advanced Batteries Accumulators and Fuel Cells – 16th ABAF. 2015.
s. 125-128. ISBN: 978-80-214-5109- 4.
DetailPROCHÁZKA, P.; PAZDERA, I.; CIPÍN, R.; HADAŠ, Z. Optimal Design Techniques for Small Electric Car Operating in Common Urban Traffic. Przeglad Elektrotechniczny, 2015, roč. 2015, č. 5,
s. 1-8. ISSN: 0033-2097.
Detail | WWW2014
CIPÍN, R.; PAZDERA, I.; PROCHÁZKA, P.; KNOBLOCH, J.; ČERVINKA, D.; KADLEC, J. Discrete and Continuous Fractional Controllers. In Proceedings of the 16th International Conference on Mechatronics – Mechatronika 2014. Brno: 2014.
s. 554-559. ISBN: 978-80-214-4817- 9.
DetailPROCHÁZKA, P.; CIPÍN, R.; PAZDERA, I.; KNOBLOCH, J.; ČERVINKA, D.; KADLEC, J. Communication and Energy Management System of Small Electric Airplane. In Proceedings of the 16th International Conference on Mechatronics – Mechatronika 2014. Brno: 2014.
s. 11-16. ISBN: 978-80-214-4817- 9.
DetailKADLEC, J.; PAZDERA, I.; PROCHÁZKA, P.; KNOBLOCH, J.; ČERVINKA, D.; CIPÍN, R. Modular System of Converters with Interleaved Structure. In Procceedings of the 16th international conference on machatronics - Mechatronika 2014. Brno: 2014.
s. 146-151. ISBN: 978-80-214-4817- 9.
DetailPAZDERA, I.; CIPÍN, R.; PROCHÁZKA, P.; KNOBLOCH, J.; ČERVINKA, D.; KADLEC, J. Actuator for Tattoo Machine. In Proceedings of the 16th International Conference on Mechatronics – Mechatronika 2014. Brno: 2014.
s. 564-568. ISBN: 978-80-214-4817- 9.
DetailČERVINKA, D.; KNOBLOCH, J.; PROCHÁZKA, P.; KADLEC, J.; CIPÍN, R.; PAZDERA, I. Electric Powered Airplane VUT 051 RAY. In Proceedings of the 16 th International Conference on Mechatronics – Mechatronika 2014. 1. Brno: Brno University of technology, 2014.
s. 6-10. ISBN: 978-80-214-4817- 9.
DetailKNOBLOCH, J.; ČERVINKA, D.; PROCHÁZKA, P.; KADLEC, J.; CIPÍN, R.; PAZDERA, I. Universal Test Bench for AC Traction Motors 600V/ 500A. In Proceedings of the 16 th International Conference on Mechatronics – Mechatronika 2014. 1. Brno: Brno University of technology, 2014.
s. 136-141. ISBN: 978-80-214-4817- 9.
DetailPROCHÁZKA, P.; PAZDERA, I.; VOREL, P.; CIPÍN, R.; MARTIŠ, J.; ČERVINKA, D. Možnosti snížení energetické náročnosti provozu trolejbusů. 2014.
DetailPROCHÁZKA, P.; ČERVINKA, D.; VOREL, P.; MARTIŠ, J.; CIPÍN, R.; PAZDERA, I. Zjištění příčin poruchovosti Skiipů ve výzbroji vozů 13T. 2014.
DetailPROCHÁZKA, P.; CIPÍN, R.; PAZDERA, I.; VOREL, P.; MARTIŠ, J. Návrh aktivního usměrňovače. 2014.
DetailPROCHÁZKA, P.; MARTIŠ, J.; PAZDERA, I.; VOREL, P.; CIPÍN, R. NTE10- Řídicí software pro aktivní usměrňovač. 2014.
DetailCIPÍN, R.; PATOČKA, M. Electromagnetic Design of Atypical Induction Motor. In Proceedings of the 40th Annual Conference of the IEEE Industrial Electronics Society. Dallas, TX, U.S.A.: 2014.
s. 569-574. ISBN: 978-1-4799-4033- 2.
DetailCIPÍN, R.; KADLEC, J.; HUTÁK, P.; KLÍMA, B. Battery System for the Airplane VUT 051 RAY. ECS Transaction, 2014, roč. 48, č. 1,
s. 217-222. ISSN: 1938- 6737.
Detail2013
CIPÍN, R.; PATOČKA, M. Skin Effect in Rotor Bars of Induction Motor in Form of Transfer Function. In Proceedings of the IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society. Vídeň: 2013.
s. 3146-3150. ISBN: 978-1-4799-0223- 1.
DetailCIPÍN, R.; ONDRŮŠEK, Č.; HUZLÍK, R. Fractional- order model of DC motor. In Mechatronics 2013 Recent Technological and Scientific Advances. 1. London: Springer, 2013.
s. 363-370. ISBN: 978-3-319-02293- 2.
DetailCIPÍN, R.; PATOČKA, M. Electromagnetic design of irregular three phase windings. In Proceedings of EPE '13- ECCE Europe. Lille, Francie: 2013.
s. 1-10. ISBN: 978-90-75815-17- 7.
DetailKADLEC, J.; CIPÍN, R.; KLÍMA, B.; ČERVINKA, D.; VOREL, P. Li- ion accumulators for propulsion system of electric Airplane VUT 051 RAY. Journal of Solid State Electrochemistry, 2013, roč. 2013, č. 10,
s. 1-7. ISSN: 1432- 8488.
Detail2012
CIPÍN, R.; KLÍMA, B.; HUTÁK, P.; NOUMAN, Z.; KNOBLOCH, J.; VONDRUŠ, J. Battery Monitoring System for the Airplane VUT 051 RAY. ECS Transaction, 2012, roč. 2012(40), č. 1,
s. 261-265. ISSN: 1938- 6737.
DetailCIPÍN, R.; PATOČKA, M. AC Fractional Winding Design by the New Method. In 2012 INTERNATIONAL SYMPOSIUM ON Power Electronics, Electrical Drives, Automation and Motion. 1. Sorrento: 2012.
s. 609-613. ISBN: 978-1-4673-1300- 1.
DetailCIPÍN, R.; PATOČKA, M.; PROCHÁZKA, P. Mathematical Tool for RMS Value Calculation of Impulse signals. In 2012 INTERNATIONAL SYMPOSIUM ON Power Electronics, Electrical Drives, Automation and Motion. 1. Sorrento: 2012.
s. 983-987. ISBN: 978-1-4673-1300- 1.
DetailCIPÍN, R.; SKALKA, M.; ONDRŮŠEK, Č.; KURFÜRST, J. Harmonic Reduction in Induction Machine Using Slot Wedges Optimization. In 2012 INTERNATIONAL SYMPOSIUM ON Power Electronics, Electrical Drives, Automation and Motion. 1. 2012.
s. 1252-1257. ISBN: 978-1-4673-1300- 1.
DetailCIPÍN, R.; KLÍMA, B.; HUTÁK, P.; KADLEC, J. Battery System for the Airplane VUT 051 RAY. In Advanced Batteries Accumulators and Fuel Cells - 13th ABAF Book of Proceedings. Brno: Brno University of Technology, 2012.
s. 1-6. ISBN: 978-80-214-4610- 6.
DetailCIPÍN, R.; PATOČKA, M. Vyšší harmonické magnetické indukce ve vzduchové mezeře asynchronního motoru. In Proceedings of the 13th Internationnal Scientific Conference Electric Power Engineering 2012, Volume 1. 1. Brno: Brno University of Technology, 2012.
s. 321-324. ISBN: 978-80-214-4514- 7.
Detail | WWWCIPÍN, R.; PATOČKA, M. Electromagnetic Design of Interspersed Winding for Induction Machines. In XII. International Conference on Low Voltage Electrical Machines 2012. 1. Brno: 2012.
s. 30-33. ISBN: 978-80-214-4602- 1.
Detail2011
OTÝPKA, J.; PATOČKA, M.; CIPÍN, R. Střídavá magnetická pole pro biomedicínské experimenty. Elektrorevue - Internetový časopis (http://www.elektrorevue.cz), 2011, roč. 2011, č. 17,
s. 1-5. ISSN: 1213- 1539.
DetailVONDRUŠ, J.; CIPÍN, R. Bifurcation Generator. In IEEE International Conference on Power Engineering, Energy and Electrical Drives. 1. Torremolinos (Málaga), Spain: IEEE, 2011.
s. 1-4. ISBN: 978-1-4244-9843- 7.
Detail | WWWCIPÍN, R.; PATOČKA, M.; VONDRUŠ, J. Acceleration method of the IM torque- speed characteristics measurement. In IEEE International Conference on Power Engineering, Energy and Electrical Drives. 1. Torremolinos (Málaga), Spain: IEEE, 2011.
s. 1-5. ISBN: 978-1-4244-9843- 7.
Detail | WWWCIPÍN, R.; PATOČKA, M.; VONDRUŠ, J. Electromagnetic Design of Induction Machines Windings by the New Method. In XI. International Conference Proceeding on Low Voltage Electrical Machines. 1. Brno: UVEE, 2011.
s. 1-4. ISBN: 978-80-214-4362- 4.
DetailCIPÍN, R.; PATOČKA, M. New infinitesimal method for the analysis and synthesis of AC machines winding. In Joint Conference on Electromotion/ IEEE Aegean Conference on Electrical Machines and Power Electronics. Istanbul: Bahcesehir University, 2011.
s. 1-6. ISBN: 978-1-4673-5004- 4.
DetailCIPÍN, R.; PATOČKA, M. New infinitesimal method for the calculation of self and mutual inductances of arbitrary AC windings. In Proceedings of the 9th IEEE International Conference on Power Electronics and Drive Systems. Singapore: IEEE, 2011.
s. 1-6. ISBN: 978-1-4577-0000- 2.
DetailCIPÍN, R.; PATOČKA, M. Identification of the induction motor parameters based on the acceleration method. In Proceedings of the 9th IEEE International Conference on Power Electronics and Drive Systems. Singapore: IEEE, 2011.
s. 1-6. ISBN: 978-1-4577-0000- 2.
DetailCIPÍN, R.; VONDRUŠ, J. New method of electromagnetic design of AC machines. In Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium. Vienna, AT: DAAAM International, 2011.
s. 1397-1398. ISBN: 978-3-901509-83- 4.
Detail2009
CIPÍN, R.; BĚLOUŠEK, J.; PATOČKA, M. Výpočet momentové charakteristiky asynchronního motoru s uvažováním skinefektu v kleci. In XXXI. Celostátní konference o elektrických pohonech. 1. Plzeň: ZCU Plzeň, 2009.
s. 19-23. ISBN: 978-80-02-02151- 3.
DetailCIPÍN, R.; BĚLOUŠEK, J. Influence of a skin effect in the squirrel cage on a speed- torque characteristics of the induction motor. In Proceedings of the 15th Conference STUDENT EEICT 2009 - Volume 3. Brno: NOVPRESS s.r.o., 2009.
s. 73-77. ISBN: 978-80-214-3870- 5.
DetailCIPÍN, R.; PATOČKA, M.; BĚLOUŠEK, J. Způsoby identifikace parametrů náhradního zapojení asynchronního motoru. In Sborník celostátní konference EPVE09. Brno: VUT Brno, FEKT, UVEE, 2009.
s. 23-28. ISBN: 978-80-214-3974- 0.
Detail2008
CIPÍN, R.; PATOČKA, M. Citlivostní analýza momentové charakteristiky asynchronního motoru. In Sborník celostátní konference EPVE 2008. Brno: VUT Brno, FEKT, UVEE, 2008.
s. 22-29. ISBN: 978-80-7204-603- 4.
Detail
*) Citace publikací se generují jednou za 24 hodin.