Project detail

Systém pro zkvalitnění výzkumných týmů ve strojírenství a hraničních oborech

Duration: 01.04.2011 — 31.03.2014

Funding resources

Evropská unie - OP VK - Oblast podpory 2.3 - Lidské zdroje ve VaV (2. výzva)

- whole funder (2011-04-01 - 2014-03-31)

On the project

Cílem projektu je vytvoření progresivního systému pro vytváření týmů pro zvýšení konkurenceschopnosti, zlepšení manažerských, marketingových a organizačních zručností vědeckých pracovníků Fakulty strojního inženýrství VUT v Brně a NETME Centre s cílem dosažení trvalé udržitelnosti. Součástí projektu bude podpora diseminace a popularizace výstupů vytvořených v oblasti procesního a ekologického inženýrství, což je klíčovým bodem pro celkovou udržitelnost projektu NETME centre. Projekt také přispěje k prohloubení stávající a navázání nové spolupráce s nejrenomovanějšími odborníky a organizacemi v ČR i zahraničí a umožní jednodušší získávání zakázek a budování komerčních vztahů.

Description in English
The aim is to create a progressive system for building teams to increase competitiveness, improve management, marketing, and organizational skills of researchers of the Faculty of Mechanical Engineering, Brno University of Technology and NETME Centre in order to achieve sustainability. The project will support the dissemination and popularization of the outputs generated in the field of process and environmental engineering, which is the key point for the overall sustainability of the project NETME Centre. The project will also contribute to the deepening of the existing and new cooperation with the most renowned experts and organizations in the Czech Republic and abroad, and allows easier procurement and construction of commercial relations.

Keywords
strojírenství, procesní inženýrství, vzdělávání

Key words in English
mechanical engineering, process engineering, education

Mark

EE2.3.20.0020

Default language

Czech

People responsible

Jegla Zdeněk, doc. Ing., Ph.D. - principal person responsible

Units

Institute of Process Engineering
- (2011-04-01 - 2014-03-31)

Results

BĚLOHRADSKÝ, P.; KERMES, V. Experimental Study on NOx Formation in the Low-NOx Burner: Gas - Staging in Combination with Internal Flue Gas Recirculation. Cardiff University: 2011. p. 301-301.
Detail

HÁJEK, J.; JUŘENA, T.; BAIER, B.; BAGHERZADEH, A.; SCHNICK, T.; SMEJKAL, Q. CFD Process Modeling of Industrial Calcination of Diatomite. CHEMIE INGENIEUR TECHNIK, 2015, vol. 87, no. 7, p. 991-997. ISSN: 0009-286X.
Detail

JECHA, D. Bilance znečišťujících látek ve spalinách komunální spalovny odpadů. Odpadové fórum 2012. 1. Praha: České ekologické manažerské centrum, 2012. s. 4-15. ISBN: 978-80-85990-20-1.
Detail

ŠOMPLÁK, R.; POPELA, P.; PAVLAS, M.; FERDAN, T.; TOUŠ, M. A Stochastic Programming Model for Waste-to-Energy Facility Planning. In MENDEL 2012. Mendel Journal series. Brno, Česká republika: 2012. p. 180-185. ISBN: 978-80-214-4540-6. ISSN: 1803-3814.
Detail

TUREK, V.; BĚLOHRADSKÝ, P.; JEGLA, Z. Geometry Optimization of a Gas Preheater Inlet Region - A Case Study. Chemical Engineering Transactions, 2012, vol. 29, no. 2, p. 1339-1344. ISSN: 1974-9791.
Detail

LOŠÁK, P.; KILKOVSKÝ, B.; JEGLA, Z. Analysis of plucking of U-tubes in heat exchanger. Chemical Engineering Transactions, 2012, vol. 29, no. 2, p. 1393-1398. ISSN: 1974-9791.
Detail

BENÁČKOVÁ, J.; FRÝBA, L.; PAVLAS, M.; HEJL, M. Determination of Lower Heating Value of Municipal Solid Waste by Mathematical Analysis of a Plant Production Data from a Real Waste-to-Energy Plant. Chemical Engineering Transactions, 2012, vol. 2012, no. 29, p. 721-726. ISSN: 1974-9791.
Detail

NEJEZCHLEB, R.; SKRYJA, P. Obstacles in the Utilization of Biodiesel as the Fuel in Small Stationary Combustion Units. Chemical Engineering Transactions, 2012, vol. 29, no. 2, p. 961-966. ISSN: 1974-9791.
Detail

ŠOMPLÁK, R.; PAVLAS, M.; UCEKAJ, V.; POPELA, P. Waste-to-Energy Facility Planning Supported by Stochasting Programming - Part I Introduction. Chemical Engineering Transactions, 2012, vol. 29, no. 1, p. 649-654. ISSN: 1974-9791.
Detail

ŠOMPLÁK, R.; TOUŠ, M.; FERDAN, T.; PAVLAS, M.; POPELA, P. Waste-to-Energy Facility Planning Supported by Stochasting Programming - Part II Model development and application. Chemical Engineering Transactions, 2012, vol. 29, no. 1, p. 739-744. ISSN: 1974-9791.
Detail

PAČÍSKA, T.; JEGLA, Z.; REPPICH, M. Analysis of possibilities of elimination of liquid droplets from gas flow for mitigation of operating problems of gas preheater. Chemical Engineering Transactions, 2012, vol. 29, no. 2, p. 1387-1392. ISSN: 1974-9791.
Detail

JECHA, D.; BÉBAR, L.; STEHLÍK, P. Balances of contaminants in flue gas from municipal waste incineration plant. Chemical Engineering Transactions, 2012, vol. 29, no. 2, p. 1057-1062. ISSN: 1974-9791.
Detail

JEDLIČKA, F.; JECHA, D.; BÉBAR, L.; STEHLÍK, P.; ORAL, J. Combined flue gas cleaning from persistent organic compounds and nitrogen oxides in the multifunction filter. Chemical Engineering Transactions, 2012, vol. 29, no. 2, p. 1063-1068. ISSN: 1974-9791.
Detail

HÁJEK, Z.; JEGLA, Z. Recent situation and actual possibilities in development of sea water desalination equipment. Chemical Engineering Transactions, 2012, vol. 29, no. 2, p. 1381-1386. ISSN: 1974-9791.
Detail

BĚLOHRADSKÝ, P.; KERMES, V. Experimental Study on NOx Formation in Gas-staged Burner Based on the Design of Experiments. Chemical Engineering Transactions, 2012, vol. 29, no. 1, p. 79-84. ISSN: 1974-9791.
Detail

JEGLA, Z. Identifikace provozního zatížení trubkových hadů ohřevných pecí a kotlů. In Sborník príspevkov z XIII. medzinárodnej konferencie Prevádzková spoľahlivosť výrobných zariadení v chemickom priemysle a energetike. 1. Bratislava: Slovenská technická univerzita v Bratislavě, 2012. s. 16-38. ISBN: 978-80-227-3806-4.
Detail

VONDÁL, J.; HÁJEK, J. Prediction of flow through swirl generator and validation by measured data. In 13th European Turbulence Conference 2011 (ETC13). Journal of Physics: Conference Series. Varšava, Polsko: IOPscience, 2011. p. 1-6. ISBN: 9781622765430. ISSN: 1742-6588.
Detail

BENÁČKOVÁ, J.; FRÝBA, L.; PAVLAS, M.; FERDAN, T. DETERMINATION OF BOILER EFFICIENCY AND LOWER HEATING VALUE OF MUNICIPAL SOLID WASTE AT REAL WASTE-TO-ENERGY PLANT. In Mezinárodní Masarykova konference pro doktorandy a mladé vědecké pracovníky 2012. Hradec Králové, The Czech Republic: 2013. p. 3072-3081. ISBN: 978-80-905243-3-0.
Detail

KERMES, V.; BĚLOHRADSKÝ, P. Biodiesel (EN 14213) heating oil substitution potential for petroleum based light heating oil in a 1 MW stationary combustion facility. BIOMASS & BIOENERGY, 2013, vol. 2013, no. 49, p. 10-21. ISSN: 0961-9534.
Detail

JECHA, D.; BRUMMER, V.; MARTINEC, J.; SKRYJA, P. Exchange of incineration unit by catalytic oxidation unit for VOC removal. In 1st International Conference on Chemical Technology. 1. Mikulov: ČSPCH, 2013. p. C3.2-1 (C3.2-6 p.)ISBN: 978-80-86238-37-1.
Detail

MÁŠA, V.; BOBÁK, P.; STEHLÍK, P.; KUBA, P. Analysis of energy efficient and environmentally friendly technologies in professional laundry service. Clean Technologies and Environmental Policy, 2013, vol. 15, no. 3, p. 445-457. ISSN: 1618-954X.
Detail

BĚLOHRADSKÝ, P.; SKRYJA, P.; HUDÁK, I. Experimental Investigation of Characteristic Parameters of Combustion of Natural Gas with Oxygen-Enriched Air. In Abstract Book. Lund: Congrex Sweden AB/Informationsbolaget Nyberg & Co., 2013. p. 90-90. ISBN: 978-91-637-2150-2.
Detail

BRUMMER, V.; JECHA, D.; MARTINEC, J.; SKRYJA, P. Stress test of pilot unit for removal of VOCs and CO by catalytic oxidation. In Abstract Book - 6th European combustion meeting. 2013. p. P1-77 1 (P1-77 6 p.)ISBN: 978-91-637-2150-2.
Detail

SKRYJA, P.; BĚLOHRADSKÝ, P. Influence of the ammonia in the gaseous fuel on the production of NOx. In Abstract Book - 6th European combustion meeting. Lund: Congrex Sweden AB/Informationsbolaget Nyberg & Co., 2013. p. 111-111. ISBN: 978-91-637-2150-2.
Detail

ŠOMPLÁK, R.; FERDAN, T.; POPELA, P.; PAVLAS, M. Waste-to-energy facility planning under uncertain circumstances. Applied Thermal Engineering, 2013, vol. 61, no. 1, p. 106-114. ISSN: 1359-4311.
Detail

BRUMMER, V.; JECHA, D.; SKRYJA, P.; LEŠTINSKÝ, P. Design of multifunctional pilot unit for waste gases pollutants reduction. MCS-8 Eighth mediterranean combustion symposium Book of Abstracts. 2013. p. PFC-1 1 (PFC-1 11 p.)
Detail

BĚLOHRADSKÝ, P.; SKRYJA, P. Experimental study on the influence of oxygen fraction in the combustion air on the combustion characteristics. Chemical Engineering Transactions, 2013, vol. 35, no. 1, p. 1147-1152. ISSN: 1974-9791.
Detail

PAČÍSKA, T.; JEGLA, Z.; KILKOVSKÝ, B.; REPPICH, M.; TUREK, V. Thermal Analysis of Unconventional Process Condenser Using Conventional Software. In Chemical Engineering Transactions, Vol. 35: Selected Papers of PRES'13. Chemical Engineering Transactions. Milano, Italy: AIDIC Servizi S.r.l., 2013. p. 469-474. ISBN: 978-88-95608-26-6. ISSN: 1974-9791.
Detail

MÁŠA, V.; BOBÁK, P.; STEHLÍK, P.; KUBA, P. Energy Intensive Process in Professional Laundry Service: Up-to-date Approach. Chemical Engineering Transactions, 2013, vol. 35, no. 1, p. 259-264. ISSN: 1974-9791.
Detail

JECHA, D.; MARTINEC, J.; BRUMMER, V.; STEHLÍK, P.; LEŠTINSKÝ, P. Modernization of Unit for Elimination of VOCs by Catalytic Oxidation. Chemical Engineering Transactions, 2013, vol. 35, no. 2013, p. 745-750. ISSN: 1974-9791.
Detail

VONDÁL, J.; HÁJEK, J. Heat Flux Measurement Methods for Process Furnaces – a Case Study. Chemical Engineering Transactions, 2013, vol. 35, no. 1, p. 1153-1158. ISSN: 1974-9791.
Detail

VONDÁL, J.; HÁJEK, J. Comparison of SAS Turbulence Model to the SST k-omega in Non-Premixed Combustion Simulation. Proceedings of 14th European Turbulence Conference. Lyon, Francie: 2013. p. 1-2.
Detail

JUŘENA, T.; HÁJEK, J. Mathematical Modelling of Grate Combustion: Bed and Freeboard Coupling Issues. Chemical Engineering Transactions, 2013, vol. 35, no. 1, p. 985-990. ISSN: 1974-9791.
Detail

JUŘENA, T.; BROUKAL, J. Review on validation of CFD models of swirling flows by experimental data. In Sborník CHISA 2013, Plné texty příspěvků. Praha: ČSCHI, 2013. p. P30-1 (P30-8 p.)ISBN: 978-80-02-02500-9.
Detail

JUŘENA, T.; HÁJEK, J. GRATECAL – Computational Tool for Numerical Simulation of Biomass Grate Combustion. Proceedings of 9th European Congress of Chemical Engineers. The Hague, Netherlands: 2013. p. 12993 ( p.)
Detail

JECHA, D.; BRUMMER, V.; LEŠTINSKÝ, P.; SKRYJA, P. Návrh multifunkční poloprovozní jednotky pro snižování polutantů z odpadního plynu. In CHISA 2013 - plné texty příspěvků. 1. Srní: ČSCHI, 2013. s. B 4.3 (B 4.5 s.)ISBN: 978-80-02-02500-9.
Detail

KROPÁČ, J.; FERDAN, T.; PAVLAS, M. Waste-to-Energy Modelling – Energy Efficiency versus Minimized Environmental Impact. Chemical Engineering Transactions, 2013, vol. 35, no. 1, p. 901-906. ISSN: 1974-9791.
Detail

ŠOMPLÁK, R.; PAVLAS, M.; POPELA, P.; PROCHÁZKA, V. The Logistic Model for Decision Making in Waste Management. Chemical Engineering Transactions, 2013, vol. 35, no. 1, p. 817-822. ISSN: 1974-9791.
Detail

ŠOMPLÁK, R.; PROCHÁZKA, V.; PAVLAS, M.; FERDAN, T. Posouzení atraktivity investičních záměrů výstavby zařízení pro energetické využití odpadu. In 60. konference chemického a procesního inženýrství CHISA 2013. Praha: Česká společnost chemického inženýrství, 2013. s. B 4.1 (B 4.1 s.)ISBN: 978-80-905035-0-2.
Detail

FRÝBA, L.; BÉBAR, L.; TOUŠ, M. Evaluation of Sewage Sludge Co-incineration in the Existing Heating Plant or Power Plant from Emission Production Point of View. Chemical Engineering Transactions, 2013, vol. 2013, no. 35, p. 823-828. ISSN: 1974-9791.
Detail

TOUŠ, M.; FRÝBA, L.; PAVLAS, M. Improving Calculation of Lower Heating Value of Waste by Data Reconciliation – Analysis and Evaluation. Chemical Engineering Transactions, 2013, vol. 2013, no. 35, p. 877-882. ISSN: 1974-9791.
Detail

NIESNER, J.; JECHA, D.; STEHLÍK, P. Biogas upgrading technologies: State of art review in european region. Chemical Engineering Transactions, 2013, vol. 35, no. 2013, p. 517-522. ISSN: 1974-9791.
Detail

SMEJKAL, Q.; PAVLAS, M.; SKYDÁNEK, L.; AMANN, G.; REPPICH, M. E-learning as supporting tool for cooperation in the field of process, energy and mechanical engineering on international level. Chemical Engineering Transactions, 2013, vol. 35, no. 1, p. 679-684. ISSN: 1974-9791.
Detail

LEŠTINSKÝ, P.; BRUMMER, V.; JECHA, D.; SKRYJA, P.; STEHLÍK, P. Design of catalytic oxidation unit for elimination of VOC and CO. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2014, vol. 53, no. 2, p. 732-737. ISSN: 0888-5885.
Detail

BRUMMER, V.; JUŘENA, T.; HLAVÁČEK, V.; OMELKOVÁ, J.; BÉBAR, L.; GABRIEL, P.; STEHLÍK, P. Enzymatic hydrolysis of pretreated waste paper – Source of raw material for production of liquid biofuels. BIORESOURCE TECHNOLOGY, 2014, vol. 2014, no. 152, p. 543-547. ISSN: 0960-8524.
Detail

JECHA, D.; BRUMMER, V.; LEŠTINSKÝ, P.; MARTINEC, J.; STEHLÍK, P. Effective abatement of VOC and CO from acrylic acid and related production waste gas by catalytic oxidation. Clean Technologies and Environmental Policy, 2014, vol. 16, no. 7, p. 1329-1338. ISSN: 1618-954X.
Detail

ŠOMPLÁK, R.; PAVLAS, M.; KROPÁČ, J.; PUTNA, O.; PROCHÁZKA, V. Logistic model-based tool for policy-making towards sustainable waste management. Clean Technologies and Environmental Policy, 2014, vol. 16, no. 10098, p. 1275-1286. ISSN: 1618-954X.
Detail

BĚLOHRADSKÝ, P.; SKRYJA, P.; HUDÁK, I. Experimental study on the influence of oxygen content in the combustion air on the combustion characteristics. Energy, 2014, vol. 2014, no. 75, p. 116-126. ISSN: 0360-5442.
Detail

JUŘENA, T.; HÁJEK, J. Effects of convergence criteria on mass and energy balance of packed-bed combustion model. In Third International Conference on Computational Methods for Thermal Problems. ThermaComp proceedings. Napoli, Italy: Giannini Editore, 2014. p. 245-248. ISBN: 978-88-7431-727-1. ISSN: 2305-5995.
Detail

HÁJEK, J.; JEGLA, Z.; VONDÁL, J. Numerical Analysis of Radiant Section of Fired Heater Focused on the Effect of Wall-Tube Distance. In 24th European Symposium on Computer Aided Process Engineering (ESCAPE). Computer Aided Chemical Engineering. Netherlands: Elsevier, 2014. p. 331-336. ISBN: 978-963-9970-48-9. ISSN: 1570-7946.
Detail

VONDÁL, J.; VAN DER STEEN, M.; TUMMERS, M. Tracking of Impiging Jet Flame. In ENGINEERING MECHANICS 2014. Engineering Mechanics .... 2014. p. 692-695. ISBN: 978-80-214-4871-1. ISSN: 1805-8248.
Detail

FERDAN, T.; ŠOMPLÁK, R.; PAVLAS, M. Improved feasibility analysis under volatile conditions: case of waste-to-energy. In Proceedings of the 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction PRES 2014. Chemical Engineering Transactions. Milan, Italy: AIDIC Servizi S.r.l., 2014. p. 691-696. ISBN: 978-88-95608-30-3. ISSN: 2283-9216.
Detail

FRÝBA, L.; BÉBAR, L.; TOUŠ, M. Analysis of Requirement for Sewage Sludge Incineration. In Proceedings of the 17th CONFERENCE ON PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION PRES 2014. Chemical Engineering Transactions. Milano, Italy: AIDIC Servizi S.r.l., 2014. p. 631-636. ISBN: 978-88-95608-30-3. ISSN: 2283-9216.
Detail

PUTNA, O.; KROPÁČ, J.; FRÝBA, L.; PAVLAS, M. Prediction of Heating Value of Waste and Its Importance for Conceptual Development of New Waste-to-Energy Plants. In Proceedings of the 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction PRES 2014. Chemical Engineering Transactions. Milano, Italy: Aidic Servizi S.r.l., 2014. p. 1273-1278. ISBN: 978-88-95608-30-3. ISSN: 2283-9216.
Detail

ŠOMPLÁK, R.; PAVLAS, M. Potenciál výroby energie z odpadů v případě zákazu skládkování. 2014. s. 1-11.
Detail

JECHA, D.; SKRYJA, P.; JEDLIČKA, F.; BRUMMER, V.: KatOx Sokolov; Poloprovozní jednotka technologie katalytické oxidace na jednotce 2U-600. Momentive Specialty Chemicals, a.s. Sokolov. (poloprovoz)
Detail

Link