Ing.

František Šebek

Ph.D.

FSI, ÚMTMB OIM – odborný asistent

sebek@fme.vutbr.cz

Odeslat VUT zprávu

Ing. František Šebek, Ph.D.

Publikace

  • 2020

    ŠEBEK, F.; KUBÍK, P.; BRABEC, M.; TIPPNER, J. Modelling of impact behaviour of European beech subjected to split Hopkinson pressure bar test. COMPOSITE STRUCTURES, 2020, roč. 245, č. 1, s. 1-11. ISSN: 0263-8223.
    Detail | WWW

    NYTRA, M.; KUBÍK, P.; PETRUŠKA, J.; ŠEBEK, F. A Fully Coupled Thermomechanical Damage Analysis of Hot Closed Die Forging Using Finite Element Modeling. Journal of Materials Engineering and Performance, 2020, roč. 29, č. 12, s. 8236-8246. ISSN: 1059-9495.
    Detail | WWW

    VOBEJDA, R.; ŠEBEK, F.; PETRUŠKA, J.; KUBÍK, P. Associated and non-associated flow rules in the stress state prediction. In Engineering Mechanics 2020. 2020. s. 512-515. ISBN: 978-80-214-5896-3.
    Detail

  • 2019

    KUBÍK, P.; PETRUŠKA, J.; VOSYNEK, P.; ŠEBEK, F. Lode dependent plasticity in the prediction of deformation states of tensile specimens. In 9th International Conference Materials Structure & Micromechanics of Fracture (MSMF9). Procedia Structural Integrity. 2019. s. 15-20. ISSN: 2452-3216.
    Detail

    PEČ, M.; ŠEBEK, F.; ZAPLETAL, J.; PETRUŠKA, J.; HASSAN, T. Automated calibration of advanced cyclic plasticity model parameters with sensitivity analysis for aluminium alloy 2024-T351. Advances in Mechanical Engineering, 2019, roč. 11, č. 3, s. 1-14. ISSN: 1687-8140.
    Detail | WWW | Plný text v Digitální knihovně

    ŠEBEK, F.; PARK, N.; KUBÍK, P.; PETRUŠKA, J.; ZAPLETAL, J. Ductile fracture predictions in small punch testing of cold-rolled aluminium alloy. Engineering Fracture Mechanics, 2019, roč. 206, č. 1, s. 509-525. ISSN: 0013-7944.
    Detail

    KUBÍK, P.; ŠEBEK, F.; ZAPLETAL, J.; PETRUŠKA, J.; NÁVRAT, T. Ductile Failure Predictions for the Three-Point Bending Test of a Complex Geometry Made From Aluminum Alloy. Journal of Engineering Materials and Technology, 2019, roč. 141, č. 4, s. 1-12. ISSN: 0094-4289.
    Detail | WWW

    ŠEBEK, F.; KUBÍK, P.; PETRUŠKA, J.; ZAPLETAL, J. Non-associated flow rule in the prediction of complex stress states and deformations. In Experimental Stress Analysis 2019. 2019. s. 488-492. ISBN: 978-80-214-5766-9.
    Detail

    ŠEBEK, F.; ZAPLETAL, J.; KUBÍK, P.; PETRUŠKA, J. Flow behaviour in compression test under various lubrication conditions. In Engineering Mechanics 2019. 2019. s. 351-354. ISBN: 978-80-87012-71-0.
    Detail

    PEČ, M.; ZAPLETAL, J.; ŠEBEK, F.; PETRUŠKA, J. Low-Cycle Fatigue, Fractography and Life Assessment of EN AW 2024-T351 under Various Loadings. EXPERIMENTAL TECHNIQUES, 2019, roč. 43, č. 1, s. 41-56. ISSN: 0732-8818.
    Detail

    PEČ, M.; ŠEBEK, F.; PETRUŠKA, J. Basic Kinematic Hardening Rules Applied to 304 Stainless Steel and the Advantage of Parameters Evolution. MECH SOLIDS+, 2019, roč. 54, č. 1, s. 122-129. ISSN: 0025-6544.
    Detail | WWW

  • 2018

    ŠEBEK, F.; KUBÍK, P.; PETRUŠKA, J. Standard tensile test compared to the small punch test of aluminium alloy. In Engineering Mechanics 2018. 2018. s. 745-748. ISBN: 978-80-86246-88-8.
    Detail

    ŠEBEK, F.; PETRUŠKA, J.; KUBÍK, P. Lode dependent plasticity coupled with nonlinear damage accumulation for ductile fracture of aluminium alloy. Materials & Design, 2018, roč. 137, č. 1, s. 90-107. ISSN: 0264-1275.
    Detail

    ŠEBEK, F.; DYMÁČEK, P.; KUBÍK, P.; HŮLKA, J.; PETRUŠKA, J. The role of punch eccentricity in small punch testing. In 6th International Small Sample Test Techniques Conference. Ubiquity Proceedings. 2018. s. 43-46. ISSN: 2631-5602.
    Detail

    KUBÍK, P.; ŠEBEK, F.; PETRUŠKA, J.; HŮLKA, J.; PARK, N.; HUH, H. Comparative investigation of ductile fracture with 316L austenitic stainless steel in small punch tests: Experiments and simulations. Theoretical and Applied Fracture Mechanics, 2018, roč. 98, č. 1, s. 186-198. ISSN: 0167-8442.
    Detail

    ŠEBEK, F.; KUBÍK, P.; PETRUŠKA, J. Application of Coupled Ductile Fracture Criterion to Plane Strain Plates. In Engineering and Innovative Materials VI. Defect and Diffusion Forum. 2018. s. 186-190. ISBN: 978-3-0357-1209-4. ISSN: 1012-0386.
    Detail

    KUBÍK, P.; ŠEBEK, F.; PETRUŠKA, J. Notched specimen under compression for ductile failure criteria. Mechanics of Materials, 2018, roč. 125, č. 1, s. 94-109. ISSN: 0167-6636.
    Detail

  • 2017

    KUBÍK, P.; PETRUŠKA, J.; HŮLKA, J.; ŠEBEK, F. Simulation of the small punch test of AISI 316L austenitic steel. In Engineering Mechanics 2017. 2017. s. 542-545. ISBN: 978-80-214-5497-2.
    Detail

    ŠPANIEL, M.; MAREŠ, T.; KUŽELKA, J.; ŠEBEK, F.; DŽUGAN, J. Uncoupled material model of ductile fracture with directional plasticity. In Proceedings of the XIV International Conference on Computational Plasticity – Fundamentals and Applications. 2017. s. 596-605. ISBN: 978-84-946909-6-9.
    Detail

    ŠEBEK, F.; PETRUŠKA, J.; KUBÍK, P. The performance and prediction ability of advanced approach to ductile fracture. In Proceedings of the XIV International Conference on Computational Plasticity – Fundamentals and Applications. 2017. s. 588-595. ISBN: 978-84-946909-6-9.
    Detail

    JENÍK, I.; KUBÍK, P.; ŠEBEK, F.; HŮLKA, J.; PETRUŠKA, J. Sequential simulation and neural network in the stress–strain curve identification over the large strains using tensile test. ARCHIVE OF APPLIED MECHANICS, 2017, roč. 87, č. 6, s. 1077-1093. ISSN: 0939-1533.
    Detail

    ŠEBEK, F.; PETRUŠKA, J.; KUBÍK, P. Ductile fracture criteria implementation and calibration using the tension–torsion tests. In Engineering Mechanics 2017. 2017. s. 854-857. ISBN: 978-80-214-5497-2.
    Detail

    PEČ, M.; VOSYNEK, P.; ŠEBEK, F.; NÁVRAT, T. Implementation of American weld connection standards into finite element computations. In 4th International Conference Recent Trends in Structural Materials. IOP Conference Series: Materials Science and Engineering. IOP Publishing, 2017. s. 1-7. ISSN: 1757-8981.
    Detail | WWW | Plný text v Digitální knihovně

    ŠEBEK, F.; PETRUŠKA, J.; KUBÍK, P. Behavior of Lode Dependent Plasticity at Plane Strain Condition and its Implication to Ductile Fracture. In Materials Structure & Micromechanics of Fracture VIII. Solid State Phenomena. 2017. s. 213-216. ISBN: 978-3-03835-626-4. ISSN: 1662-9779.
    Detail

  • 2016

    PEČ, M.; KUBÍK, P.; ŠEBEK, F.; NÁVRAT, T.; PETRUŠKA, J. Modeling of the blast load effects in explicit dynamics. In Engineering Mechanics 2016. 2016. s. 442-445. ISBN: 978-80-87012-59- 8.
    Detail

    PETRUŠKA, J.; NÁVRAT, T.; ŠEBEK, F.; BENEŠOVSKÝ, M. Optimal intermeshing of multi roller cross roll straightening machine. In AIP Conference Proceedings 1769. 2016. s. 120002-1 (120002-4 s.)ISBN: 978-0-7354-1427-3.
    Detail

    ŠEBEK, F.; KUBÍK, P.; PETRUŠKA, J.; HŮLKA, J. Extremely Low-Stress Triaxiality Tests in Calibration of Fracture Models in Metal-Cutting Simulation. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2016, roč. 47, č. 11, s. 5302-5312. ISSN: 1073-5623.
    Detail

    KUBÍK, P.; ŠEBEK, F.; HŮLKA, J.; PETRUŠKA, J. Calibration of ductile fracture criteria at negative stress triaxiality. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2016, roč. 108-109, č. 4, s. 90-103. ISSN: 0020-7403.
    Detail

    ŠEBEK, F.; KUBÍK, P.; HŮLKA, J.; PETRUŠKA, J. Strain hardening exponent role in phenomenological ductile fracture criteria. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 2016, roč. 57, č. 5-6, s. 149-164. ISSN: 0997-7538.
    Detail

    PETRUŠKA, J.; NÁVRAT, T.; ŠEBEK, F. Novel approach to computational simulation of cross roll straightening of bars. Journal of Materials Processing Technology, 2016, roč. 233, č. 7, s. 53-67. ISSN: 0924-0136.
    Detail

    ŠEBEK, F.; KUBÍK, P.; PETRUŠKA, J. Verification of Ductile Fracture Criteria Based On Selected Calibration Tests. In Engineering Mechanics 2015. Applied Mechanics and Materials. 2016. s. 450-455. ISBN: 978-3-03835-700- 1. ISSN: 1662- 7482.
    Detail

    ŠEBEK, F.; PETRUŠKA, J.; KUBÍK, P. The role of loading path in ductile fracture. In Insights and Innovations in Structural Engineering, Mechanics and Computation. 2016. s. 550-556. ISBN: 978-1-138-02927-9.
    Detail

    KUBÍK, P.; ŠEBEK, F.; PETRUŠKA, J. Ductile fracture criteria in prediction of slant fracture. In ECCOMAS Congress 2016. 2016. s. 6699-6710. ISBN: 978-618-82844-0-1.
    Detail

  • 2015

    ŠEBEK, F.; KUBÍK, P.; PETRUŠKA, J. Prediction of central bursting in the process of forward extrusion using the uncoupled ductile failure models. Advances in Materials and Processing Technologies, 2015, roč. 1, č. 1-2, s. 43-48. ISSN: 2374-068X.
    Detail

    ŠEBEK, F.; KUBÍK, P.; PETRUŠKA, J. Chevron crack prediction using the extremely low stress triaxiality test. MM Science Journal, 2015, č. June, s. 617-621. ISSN: 1803- 1269.
    Detail

    KUBÍK, P.; ŠEBEK, F.; PETRUŠKA, J. Critical review of geometry of tension- torsion specimens used in ductile fracture calibration. In Výpočty konstrukcí metodou konečných prvků 2015. 2015. s. 65-66. ISBN: 978-80-87012-56- 7.
    Detail

  • 2014

    ŠEBEK, F.; KUBÍK, P.; PETRUŠKA, J. Localization Problem of Coupled Ductile Failure Models Compared to Uncoupled Ones. In Engineering Mechanics 2014. Svratka: Brno University of Technology, 2014. s. 632-635. ISBN: 978-80-214-4871-1.
    Detail

    ŠEBEK, F.; HŮLKA, J.; KUBÍK, P.; PETRUŠKA, J. On the Proportionality of Damage Rule in Finite Element Simulations of the Ductile Failure. In Modern Technologies for Engineering, Applied Mechanics and Material Science. Advanced Materials Research. 2014. s. 189-193. ISBN: 9783038351580. ISSN: 1022- 6680.
    Detail

    ŠEBEK, F.; PETRUŠKA, J.; NÁVRAT, T. Euler- type algorithm applied to leveling process analysis. Engineering Mechanics, 2014, roč. 21, č. 3, s. 185-191. ISSN: 1802- 1484.
    Detail

    ŠEBEK, F.; KUBÍK, P.; PETRUŠKA, J.; HŮLKA, J. Phenomenological Ductile Fracture Criteria Applied to the Cutting Process. World Academy of Science, Engineering and Technology, 2014, roč. 8, č. 12, s. 1204-1207. ISSN: 1307-6892.
    Detail

    KUBÍK, P.; ŠEBEK, F.; PETRUŠKA, J.; HŮLKA, J.; RŮŽIČKA, J.; ŠPANIEL, M.; DŽUGAN, J.; PRANTL, A. Calibration of Selected Ductile Fracture Criteria Using Two Types of Specimens. In Materials Structure & Micromechanics of Fracture VII. Key Engineering Materials (print). 2014. s. 258-261. ISBN: 9783037859346. ISSN: 1013-9826.
    Detail

  • 2013

    ŠEBEK, F.; PETRUŠKA, J.; NÁVRAT, T. On Advance in Leveling Process of Long Products. In Engineering Mechanics 2013. Svratka: Institute of Thermomechanics, Prague, 2013. s. 502-509. ISBN: 978-80-87012-47- 5.
    Detail

    PETRUŠKA, J.; KUBÍK, P.; HŮLKA, J.; ŠEBEK, F. Ductile Fracture Criteria in Prediction of Chevron Cracks. Advanced Materials Research, 2013, roč. 716, č. 1, s. 653-658. ISSN: 1022- 6680.
    Detail

    KUBÍK, P.; ŠEBEK, F.; PETRUŠKA, J.; HŮLKA, J. Influence of the Testing Machine’ s Stiffness on the Calibration Process of Ductile Failure Models. Bulletin of Applied Mechanics, 2013, roč. 9, č. 34, s. 31-34. ISSN: 1801-1217.
    Detail

    ŠEBEK, F.; KUBÍK, P.; HŮLKA, J.; PETRUŠKA, J. Comparison of Various Ductile Fracture Models and Their Fracture Envelopes. In Modelling and Optimization of Physical Systems. Gliwice, Polsko: Katedra Mechaniki Teoretycznej i Stosowanej, 2013. s. 53-58. ISBN: 83-60102-65- 1.
    Detail

  • 2012

    PETRUŠKA, J.; NÁVRAT, T.; ŠEBEK, F. A New Model for Fast Analysis of Leveling Process. Advanced Materials Research, 2012, roč. 586, č. 1, s. 389-393. ISSN: 1022- 6680.
    Detail

*) Citace publikací se generují jednou za 24 hodin.