Branch Details

Materials Engineering

Original title in Czech: Materiálové inženýrstvíFSIAbbreviation: B-MTIAcad. year: 2019/2020

Programme: Applied Sciences in Engineering

Length of Study: 3 years

Accredited from: 1.9.2003Accredited until: 31.8.2022

Profile

The goal of the branch „Materials engineering“ in bachelor‘s programme is to educate specialists cognizant of current experimental techniques in the field. This means that the graduate will be capable to operate the laboratory equipment in the field of metallography (light and electron microscope), mechanical testing, non-destructive and physical testing (physical and chemical analyses, differential thermal analysis and dilatometry).
The graduates of the bachelor’s study programme can plan and perform the heat and mechanical treatment of metallic as well as non-metallic materials. They are able to measure the relations between the microstructure of the material and its exploitation. They are also able to asses the extent of degradation of a structural part and to evaluate its remaining lifetime or its boundary state.

Key learning outcomes

The goal of the branch „Materials engineering“ in bachelor‘s programme is to educate specialists cognizant of current experimental techniques in the field. This means that the graduate will be capable to operate the laboratory equipment in the field of metallography (light and electron microscope), mechanical testing, non-destructive and physical testing (physical and chemical analyses, differential thermal analysis and dilatometry).
The graduates of the bachelor’s study programme can plan and perform the heat and mechanical treatment of metallic as well as non-metallic materials. They are able to measure the relations between the microstructure of the material and its exploitation. They are also able to asses the extent of degradation of a structural part and to evaluate its remaining lifetime or its boundary state.

Occupational profiles of graduates with examples

On completing bachelor studies in materials engineering the graduate will have obtained an integral lower-degree university education with orientation towards metallic and non-metallic materials, their technology, structure, properties and application.
In practice, the bachelor will be able to solve independently materials problems connected with the selection and application of materials under defined behaviour conditions in engineering, metallurgy, power engineering, transport, chemical, and electrical industries.
The graduates will be in a position to participate in solutions to both current and special materials problems involving proposals and innovation of materials for structures and industrial facilities.
The graduates will be equipped to work in materials testing shops and analytical laboratories in industrial plants and research institutes, and also in teams specializing in complex solutions to problems of innovating structures and facilities.
On completing their studies, bachelors can continue in the follow-up master degree studies in materials engineering or in related fields of study at faculties of technical orientation.

Guarantor


Course structure diagram with ECTS credits

1. year of study, winter semester
AbbreviationTitleL.Cr.Com.Compl.Hr. rangeGr.Op.
WCMChemistrycs9CompulsoryCr,ExP - 39 / L - 13yes
1INComputer Sciencecs5CompulsoryGCrP - 26 / CPP - 26yes
1MMathematics Ics9CompulsoryCr,ExP - 52 / C1 - 44 / CPP - 8yes
WONImage Analysis in Material Sciencecs6CompulsoryCr,ExP - 39 / C1 - 14 / CPP - 12yes
1KMachine Design Fundamentalscs4CompulsoryCr,ExP - 13 / CPP - 26yes
A3English 3en0Compulsory-optionalCrCj - 26 / Cj - 26 / CPP - 13 / CPP - 13Englishyes
A5English 5en0Compulsory-optionalCrCj - 26 / Cj - 26Englishyes
0KDSelected Chapters from Descriptive Geometrycs0Elective (voluntary)CrP - 26 / P - 26yes
0ZKSelected Chapters from Fundamentals of Designcs0Elective (voluntary)CrP - 26yes
0KMSelected Chapters from Mathematicscs0Elective (voluntary)CrP - 26yes
1. year of study, summer semester
AbbreviationTitleL.Cr.Com.Compl.Hr. rangeGr.Op.
BFPhysicscs6CompulsoryCr,ExP - 26 / L - 14 / C1 - 12yes
2IVInformation Knowledge - Information Literacycs1CompulsoryCrCPP - 13yes
2KMachine Designcs3CompulsoryGCrP - 13 / CPP - 26yes
BMMathematics II-Bcs6CompulsoryCr,ExP - 26 / C1 - 22 / CPP - 4yes
3STStaticscs5CompulsoryCr,ExP - 26 / C1 - 12 / CPP - 14yes
BUMIntroduction to Material Science and Engineeringcs6CompulsoryCr,ExP - 39 / L - 26yes
A4English 4en0Compulsory-optionalCrCj - 26 / Cj - 26 / CPP - 13 / CPP - 13Englishyes
A6English 6en0Compulsory-optionalCrCj - 26 / Cj - 26Englishyes
3CDCADcs2Elective (voluntary)CrCPP - 26yes
0FBSelected Topics in Physics Bcs0Elective (voluntary)CrP - 26yes
0UMMaterials Engineering - Selected Topicscs0Elective (voluntary)CrP - 26yes
2. year of study, winter semester
AbbreviationTitleL.Cr.Com.Compl.Hr. rangeGr.Op.
WEMExperimental Methods in Materials Engineeringcs9CompulsoryCr,ExP - 39 / L - 36 / C1 - 16yes
3FPhysics IIcs8CompulsoryCr,ExP - 39 / L - 26 / C1 - 26yes
3MMathematics IIIcs8CompulsoryCr,ExP - 39 / C1 - 39 / CPP - 13yes
3SVStructure and Properties of Materialscs5CompulsoryCr,ExP - 26 / L - 26yes
A3English 3en0Compulsory-optionalCrCj - 26 / Cj - 26 / CPP - 13 / CPP - 13Englishyes
A5English 5en0Compulsory-optionalCrCj - 26 / Cj - 26Englishyes
0MIPractical Materials Engineering on Industrial Artefactscs0Elective (voluntary)CrP - 8 / L - 12 / C1 - 3yes
0KDSelected Chapters from Descriptive Geometrycs0Elective (voluntary)CrP - 26 / P - 26yes
0SVEngineering Materials - Selected Topicscs0Elective (voluntary)CrP - 26yes
2. year of study, summer semester
AbbreviationTitleL.Cr.Com.Compl.Hr. rangeGr.Op.
4MMathematics IVcs5CompulsoryCr,ExP - 26 / C1 - 26yes
WNENonmetallic Materialscs7CompulsoryCr,ExP - 39 / L - 26yes
WTCTechnology (Metalurgy, Welding, Casting)cs3CompulsoryGCrP - 26 / L - 13yes
WUFIntroduction to the Materials Physicscs8CompulsoryCr,ExP - 39 / L - 26yes
WZMTesting of Materials and Structurescs7CompulsoryCr,ExP - 39 / L - 26yes
A4English 4en0Compulsory-optionalCrCj - 26 / Cj - 26 / CPP - 13 / CPP - 13Englishyes
A6English 6en0Compulsory-optionalCrCj - 26 / Cj - 26Englishyes
3. year of study, winter semester
AbbreviationTitleL.Cr.Com.Compl.Hr. rangeGr.Op.
WKMMetallic Materialscs8CompulsoryCr,ExP - 39 / L - 39yes
WMKModern Quality Managementcs3CompulsoryExP - 26yes
4PPStrength of Materials Ics7CompulsoryCr,ExP - 52 / C1 - 12 / CPP - 14yes
WNKProcessing of Nonmetallic Materialscs4CompulsoryGCrP - 26 / L - 13yes
DTZTechnique and Technology of Heat Treatmentcs5CompulsoryCr,ExP - 26 / L - 26yes
WTETechnology (Forming, Machining)cs3CompulsoryGCrP - 26 / L - 26yes
0ZCAcademic Sources and Citationscs2Elective (voluntary)CrCPP - 13yes
3. year of study, summer semester
AbbreviationTitleL.Cr.Com.Compl.Hr. rangeGr.Op.
FDMBachelor Project (B-MTI)cs6CompulsoryCrVB - 78 / C1 - 26yes
EDEDegradation Processes in Engineering Materialscs7CompulsoryCr,ExP - 39 / C1 - 26yes
WETElektrotechnologycs4CompulsoryGCrP - 26 / L - 26yes
WNZNon-destructive Testing of Materialscs6CompulsoryCr,ExP - 26 / L - 26yes
FEMBachelor Seminar (B-MTI)cs1CompulsoryCrC1 - 13yes
0SSStatistical Softwarecs2Elective (voluntary)CrCPP - 26yes
3. year of study, both semester
AbbreviationTitleL.Cr.Com.Compl.Hr. rangeGr.Op.
5AZEnglish - Basic Examen6Compulsory-optionalExZ - 1Englishyes
7AZEnglish - Exam B1en6Compulsory-optionalExZ - 1Englishyes
All the groups of optional courses
Gr. Number of courses Courses
English 1 A4, A6
English 1 A3, A5
English 1 A4, A6
English 1 A3, A5
English 1 5AZ, 7AZ