doc. Ing.

Vít Jan

Ph.D.

FSI, ÚMVI OSFA – vedoucí odboru

+420 54114 3187
jan@fme.vutbr.cz

Odeslat VUT zprávu

doc. Ing. Vít Jan, Ph.D.

Publikace

  • 2019

    MORAVČÍKOVA DE ALMEIDA GOUVÊA, L.; MORAVČÍK, I.; OMASTA, M.; VESELY, J.; ČÍŽEK, J.; MINÁRIK, P.; ČUPERA, J.; ZÁDĚRA, A.; JAN, V.; DLOUHÝ, I. High-strength Al0.2Co1.5CrFeNi1.5Ti high-entropy alloy produced by powder metallurgy and casting: A comparison of microstructures, mechanical and tribological properties. MATERIALS CHARACTERIZATION, 2019, roč. 159, č. 110046, s. 1-16. ISSN: 1044-5803.
    Detail | WWW

    MORAVČÍKOVA DE ALMEIDA GOUVÊA, L.; KOVACOVA, Z.; JAN, V.; SPOTZ, Z.; KITZMANTEL, M.; NEUBAUER, E.; DLOUHÝ, I. Effect of sintering temperature on the microstructure and properties of powder metallurgy Hf0.5Nb0.5Ta0.5Ti1.5Zr refractory high-entropy alloy. In Metal 2019. 1st edition, 2019. Brno: Tanger Ltd., 2019. s. 1486-1491. ISBN: 978-80-87294-92-5.
    Detail

  • 2018

    HANUSOVÁ, P.; DLOUHÝ, I.; JAN, V. MECHANO-CHEMICALLY PREPARED AND SPARK PLASMA SINTERED ALUMINIUM MATRIX COMPOSITE WITH CERAMIC AND INTERMETALLIC REINFORCEMENT. Materials Engineering - Materiálové inžinierstvo (online version), 2018, roč. 24, č. 4, s. 131-141. ISSN: 1338-6174.
    Detail | WWW

    KRAJŇÁKOVÁ, P.; DE ALMEIDA GOUVÊA, L.; ČUPERA, J.; JAN, V.; DLOUHÝ, I.; SPOTZ, Z. Influence of multiple electron-beam remeltings on the characteristics of HVOF and CGDS sprayed conicraly coatings. Materiali in tehnologije, 2018, roč. 52, č. 3, s. 289-293. ISSN: 1580-2949.
    Detail

    DE ALMEIDA GOUVÊA, L.; JAN, V.; DLOUHÝ, I. Preparation and Characterization of CoCrNi-Mo Metal Matrix Composite by Powder Metallurgy. In METAL 2018. 1st Edition, 2018. Brno: Tanger Ltd., 2018. s. 1545-1550. ISBN: 978-80-87294-84-0.
    Detail

    DE ALMEIDA GOUVÊA, L.; MORAVČÍK, I.; ČÍŽEK, J.; KRAJŇÁKOVÁ, P.; JAN, V.; DLOUHÝ, I. Characterization of Powder Metallurgy High-Entropy Alloys Prepared by Spark Plasma Sintering. Materials Science Forum, 2018, roč. 941, č. 1, s. 1053-1058. ISSN: 0255-5476.
    Detail | WWW

    ŘEHOŘEK, L.; DLOUHÝ, I.; JAN, V. Cold gas dynamic spray deposition as additive manufacturing of architectured materials. Materiálové inžinierstvo, 2018, roč. 24, č. 4, s. 115-123. ISSN: 1335-0803.
    Detail | WWW

  • 2017

    JAN, V.; ČUPERA, J.; ŠOHAJ, P.; HAVLÍK, P. Microstructure Evaluation of Heterogeneous Electron Beam Weld between Stabilised Austenitic and ODS Ferritic Steel. Materials Science Forum, 2017, roč. 891, č. 1, s. 185-189. ISSN: 0255-5476.
    Detail | WWW

    DE ALMEIDA GOUVÊA, L.; ČÍŽEK, J.; ČUPERA, J.; JAN, V.; DLOUHÝ, I. MICROSTRUCTURE AND PROPERTIES OF MULTI-ELEMENTARY POWDERS OBTAINED BY COLD SPRAY DEPOSITION. In METAL 2017. 1st edition, 2018. Brno: Tanger Ltd., 2017. s. 1275-1280. ISBN: 978-80-87294-79-6.
    Detail

  • 2016

    JAN, V.; MATĚJKOVÁ, M.; DLOUHÝ, I. USE OF COLD GAS DYNAMIC SPRAYING OF BI- METALLIC POWDER MIXTURES AS ALTERNATIVE TO CLASSIC POWDER METALLURGY ROUTE FOR PRODUCING INTERMETALLIC MATERIALS. Materiálové inžinierstvo, 2016, roč. 2016, č. 23, s. 1-10. ISSN: 1335-0803.
    Detail | WWW

  • 2015

    JAN, V.; ČÍŽEK, J.; DYČKA, M.; ČUPERA, J. HYPO- EUTECTOID NITI ALLOY MANUFACTURED BY CGDS POWDER MIX DEPOSITION AND HEAT TREATEMENT. Limoges: University of Limoges, 2015.
    Detail | WWW

    HANUSOVÁ, P.; PÁLENÍKOVÁ, L.; ČUPERA, J.; JAN, V.; DLOUHÝ, I. EFFECT OF HEAT TREATMENT ON MICROSTRUCTURE AND PHASES MODIFICATIONS OF BI – METALLIC MATERIALS. In Advances in Powder Metallurgy & Particulate Materials— 2015. Princeton, New Jersey: Metal Powder Industries Federation, 2015. s. 53-61. ISBN: 978-1-943694-01- 3.
    Detail

    ČUPERA, J.; JAN, V. Multimodal Analysis of Phases Formed by Reaction Diffusion in Binary Fe- Al System. Gottingen: 2015. s. 173-175.
    Detail

    PÁLENÍKOVÁ, L.; JAN, V.; ČUPERA, J.; ČÍŽEK, J. PHASE AND THERMAL ANALYSIS OF MICROSTRUCTURE EVOLUTION OF BI – METALLIC, MATERIALS DURING HEAT TREATEMENT. In Metal 2015. 2015. s. 157-166. ISBN: 978-80-87294-58- 1.
    Detail

    DYČKA, M.; JAN, V.; ČUPERA, J.; ČÍŽEK, J. HEAT TREATMENT OF HYPO- EUTECTOID NITI ALLOY MANUFACTURED BY CGDS, POWDER MIX DEPOSITION. In Metal 2015. Ostrava: Tanger, 2015. s. 147-154. ISBN: 978-80-87294-58- 1.
    Detail

    JAN, V.; ČUPERA, J.; ČÍŽEK, J. On the search for producing intermetallics by diffusion reaction of cold spray bulk deposits. Surface and Coatings Technology, 2015, roč. 2015, č. 264, s. 216-223. ISSN: 0257-8972.
    Detail | WWW

  • 2014

    JAN, V.; PÁLENÍKOVÁ, L.; ČUPERA, J.; ČÍŽEK, J. Formation of Intermetallic Phases in Fe- Al Binary Cold Spray Thick Deposit. In International Thermal Spray Conference 2014 Proceedings. Barcelona, Španělsko: DVS Media GmbH, 2014. s. 908-912. ISBN: 978-3-87155-574- 9.
    Detail

    ČUPERA, J.; JAN, V. Identification of phases in titanium alloy and correlation between EBSD, High Voltage, Medium Voltage and Low Voltage BSE imaging. 2014. s. 2940-2940.
    Detail

    PÁLENÍKOVÁ, L.; JAN, V.; ČUPERA, J.; ČÍŽEK, J. MICROSTRUCTURE OF Fe- Al BINARY COLD SPRAY THICK DEPOSIT AFTER ANNEALING. In Metal 2014. 2014. s. 1328-1333. ISBN: 978-80-87294-52- 9.
    Detail

    JINDROVÁ, E.; JAN, V.; ČUPERA, J. THE INFLUENCE OF SUBSTRATE PREPARATION, ANODIZATION CONDITIONS AND POST, ANODIZING TREATMENT ON AAO MICROSTRUCTURE. In Metal 2014. 2014. s. 953-957. ISBN: 978-80-87294-52- 9.
    Detail

  • 2013

    ŠOHAJ, P.; JAN, V. Local changes of microhardness in dissimilar weld joints after high temperature exposure. Key Engineering Materials (print), 2013, roč. 586, č. -, s. 249-252. ISSN: 1013- 9826.
    Detail

    JAN, V.; ČÍŽEK, J. Cold Gas Dynamic Spraying of Bi- metallic Powders for Intermetallic Phases Formation. 6RIPT. 1. Limoges, Francie: 2013. s. 1-13. ISBN: 1.
    Detail

  • 2012

    JAN, V.; ČÍŽEK, J. Cold Gas Dynamic Spraying of Bimetallic Powder Mixtures for Intermetallics Formation. In New Methods of Damage and Failure Analysis of Structural Parts 10-14. 9. 2012 Ostrava. VŠB Ostrava, 2012. s. 153-158. ISBN: 978-80-248-2802- 2.
    Detail

  • 2011

    HODIS, Z.; ČELKO, L.; JAN, V. Měření mikrotvrdosti v heterogenních svarových spojích. In Modernizace vysokoškolské výuky technických předmětů. Hradec Králové: Gaudeamus, Univerzita Hradec Králové, 2011. s. 36-39. ISBN: 978-80-7435-110- 5.
    Detail

    JAN, V.; IINO, Y. EVOLUTION OF OXIDE LAYERS ON METALLIC HIGH TEMPERATURE RESISTANT MATERIALS DURING ANNEALING IN HYDROGEN ATMOSPHERE. In Metall 2011 Conference proceedings. 1. Brno: Tanger, 2011. s. 116-122. ISBN: 978-80-87294-22- 2.
    Detail

  • 2010

    ŠOHAJ, P.; JAN, V.; DVOŘÁČEK, O. EVALUATION OF MICROSTRUCTURAL STABILITY OF CREEP- RESISTANT STEELS WELD JOINTS ON THE BASIS OF A COMPUTATIONAL MODELING. In METAL 2010: 19TH INTERNATIONAL METALLURGICAL AND MATERIALS CONFERENCE. 2010. Ostrava: TANGER LTD, 2010. s. 403-408. ISBN: 978-80-87294-17- 8.
    Detail

  • 2009

    JAN, V.; HODIS, Z.; SOPOUŠEK, J.; FORET, R. Real- life heterogeneous weld joint analysis of heat resistant steels using experimental and computational approach. Yucomat 2009. 1. Herceg Novi: Institute of Technical Sciencies of the Serbian Academy of Sciences and Arts, 2009. s. 139-139. ISBN: 978-86-80321-18- 9.
    Detail

    JAN, V.; IINO, Y. Changes in ODS superalloy materials induced by high temperature oxposition in different environments. Yucomat 2009. 1. Herceg Novi: Institute of Technical Sciencies of the Serbian Academy of Sciences and Arts, 2009. s. 40-40. ISBN: 978-86-80321-18- 9.
    Detail

    HODIS, Z.; JAN, V.; SOPOUŠEK, J.; FORET, R. Analysis of realistic heterogeneous welds of heat resistant steels by means of experimental and computational techniques. ČR: 2009. s. 147-147.
    Detail

    HODIS, Z.; FORET, R.; JAN, V. STRUKTURNÍ HETEROGENITA SVAROVÝCH SPOJŮ. Zvyšování životnoti komponent energetických zařízení v elektrárnách. Plzeň: ZČU Plzeň, 2009. s. 139-144. ISBN: 978-1-60595-005- 1.
    Detail

    JAN, V. ANALÝZA A SIMULACE CHOVÁNÍ MATERIÁLŮ PRO VYSOKÉ TEPLOTY. Brno: 2009. s. 0-128.
    Detail

  • 2008

    JAN, V.; ZLÁMAL, B. Experimentální a výpočetní studie heterogenního svarového spoje žárupevných ocelí s uměle zvýšeným obsahem dusíku. In Metal 2008, 17. mezinárodní konference metalurgie a materiálů. Ostrava: Tanger spol. s r.o., Ostrava, 2008. s. 104-108. ISBN: 978-80-254-1987- 8.
    Detail

    JAN, V.; IINO, I. Changes of Mechanical and Microstructural properties of Hastelloy X Induced by High Temperature Hydrogen, Air and Vacuum Exposure. In New methods of damage and failure analysis of structural parts. Ostrava: Vydavatelství VŠB- TU Ostrava, 2008. s. 25-30. ISBN: 978-80-248-1813- 9.
    Detail

    JAN, V.; ZLÁMAL, B. Study of heterogeneous welds of heat resistant steels with artificially increased nitrogen content by combination of experimental and computational techniques. TOFA 2008 Distussion Meeting on Thermidynamics of Alloys. 2008. s. 94 ( s.)
    Detail

    JAN, V.; IINO, I. Changes of microstructure, chemical and mechanical properties in ODS materials induced by high temperature air, vacuum and hydrogen exposure. Sixth International Conference on Inorganic Materials. Dresden: 2008. s. 49 ( s.)
    Detail

    DORČÁKOVÁ, F.; JAN, V.; HEGEDUSOVÁ, L.; DUSZA, J. Impression Creep in TBC and Advanced Ceramics Material. Key Engineering Materials, 2008, roč. 333, č. 333, s. 281-284. ISSN: 1013- 9826.
    Detail

    JAN, V.; ZLÁMAL, B. Study of heretogeneous welds of heat resistant steels with artificially increased nitrogen content by combination of rxperimental and computational techniques. ARCHIVES OF METALLURGY AND MATERIALS, 2008, roč. 53, č. 4, s. 1163-1170. ISSN: 1733- 3490.
    Detail

  • 2007

    JAN, V.; IINO, I. Changes of Mechanical and Microstructural Properties of Selected Superalloys Induced by High Temperature Air and Vacuum Exposure. Proceedings of EUROMAT 2007. Muenchen: DGM, 2007.
    Detail

    JAN, V.; DORČÁKOVÁ, F.; DUSZA, J.; BARTSCH, M. Indentation Creep of Free-Standing EB- PVD Thermall Barrier Coatings. Journal of the European Ceramic Society, 2007, roč. 28, č. 1, s. 241-246. ISSN: 0955- 2219.
    Detail

  • 2005

    FORET, R.; JAN, V.; ZLÁMAL, B.; SOPOUŠEK, J.; SVOBODA, M. Simulace strukturní stability svarových spojů žárupevných ocelí. In METAL 2005. 14. Ostrava: TANGER s.r.o., 2005. s. 53 ( s.)ISBN: 80-86840-13- 1.
    Detail

    JAN, V.; DORČÁKOVÁ, F.; DUSZA, J.; BARTSCH, M. Indentation Creep Tests on Free- Standing TBC Samples. In SR: TU Košice, 2005. s. 341-346.
    Detail

    ZLÁMAL, B.; FORET, R.; JAN, V.; SOPOUŠEK, J.; BURŠÍK, J. Simulation of Interstitials Redistribution in Dissimilar Welds of Heat- resistant Steels with Increased Nitrogen Content. Zeszyty naukowe politechniki Opolskiej seria Mechanika, 2005, roč. 86, č. 308, s. 311-316. ISSN: 1429- 6055.
    Detail

  • 2004

    JAN, V., SOPOUŠEK, J. Weld Joint Simulations of Heat- Resistant Steels. Archives of Metallurgy and Materials, 2004, roč. 49, č. 3, s. 469 ( s.)ISSN: 1733- 349.
    Detail

    ZLÁMAL, B.; JAN, V. Computer Simulation of Heat- Resistant Steels Welds. In JUNIOR EUROMAT 2004. 2004. Lausanne, Switzerland: DGM, 2004. s. 16 ( s.)
    Detail

    ZLÁMAL, B.; JAN, V. Simulation of Phase Profiles of Heterogeneous Heat- resistant Steel. Zeszyty naukowe politechniki Opolskiej seria Mechanika, 2004, roč. 78, č. 298, s. 207-212. ISSN: 1429- 6065.
    Detail

    JAN, V., SOPOUŠEK, J., FORET, R. Simulation of dissimilar weld joints of steel P91. Science and Technology of Welding and Joinig, 2004, roč. 9, č. 1, s. 59 ( s.)ISSN: 1362- 1718.
    Detail

    KUČERA, J.; STRÁNSKÝ, K.; JAN, V. The Dependence of Carbon Diffusion Coefficients in Austenitic Ternary allos on Additive Elements. Acta Metallurgica Slovaca, 2004, roč. 10, č. 1, s. 695-697. ISSN: 1335- 1532.
    Detail

  • 2002

    JAN, V., SOPOUŠEK, J., FORET, R. Predikce fázového složení žárupevných ocelí. In Metal 2002, 11. mezinárodní konference metalurgie a materiálů. Ostrava: Tanger spol. s r.o., Ostrava, 2002. s. 52 ( s.)ISBN: 80-85988-73- 9.
    Detail

    JAN, V.; SOPOUŠEK, J. Simulation of Carbide/Nitride Precipitation in 3%Cr 1%Mo / P91 Steel Weldment atr Temperature Range 700- 575C. Discussion Meeting on Thermodynamics of Alloys, TOFA 2002. Roma: 2002. s. 55-55.
    Detail

  • 2001

    JAN, V.; SOPOUŠEK, J.; VŘEŠŤÁL, J. Prediction of phase diagram cross-section of the Fe-Cr-Ni-Mo-Mn- N based system. In TRANSCOM 2001. Žilina, SR: 2001. s. 133 ( s.)ISBN: 80-7100-850- 8.
    Detail

    JAN, V., FORET, R., VŘEŠŤÁL, J., SOPOUŠEK, J. Prediction of phase transformations in heat- resistant steels. In JUNIORMAT 01. VUT, Brno: 2001. s. 172 ( s.)ISBN: 80-214-1885- 0.
    Detail

    USTOHAL, V., JAN, V., PTÁČKOVÁ, M. The band- like structure in iron articles from archaeological finds. Acta Metallurgica Slovaca, 2001, roč. 7, č. 2, s. 209 ( s.)ISSN: 1335- 1532.
    Detail

  • 2000

    JAN, V. Plasmochemic Treating of Corroded Surfaces of Archeological Excavations. In Lausanne: DGM, 2000. s. 416-417.
    Detail

    JAN, V. , KLÍMA,M. Analýza plazmochemického ošetření stříbrných mincí. In Brno: VUT, 2000. s. 103-106.
    Detail

  • 1999

    USTOHAL, V.; JAN, V. ;DRECHSLER, A. materiálová analýza keltských nástrojů. In Praha: NTM Praha, 1999. s. 13-18.
    Detail

*) Citace publikací se generují jednou za 24 hodin.