Branch Details

Electronics and Communications

Original title in Czech: Elektronika a sdělovací technikaFEKTAbbreviation: PK-ESTAcad. year: 2019/2020

Programme: Electrical Engineering and Communication

Length of Study: 4 years

Accredited from: 25.7.2007Accredited until: 31.12.2020

Profile

The doctor study programme provides the specialised university education to the graduates of the previous master study in electronics and communication technologies. The students are educated in various branches of theoretical and applied electronics and communication techniques. The students make deeper their theoretical knowledge of higher mathematics and physics, and they earn also knowledge of applied informatics and computer techniques.
They get ability to produce scientific works.

Key learning outcomes

The doctors are able to solve scientific and complex engineering tasks from the area of electronics and communications.
Wide fundamentals and deep theoretical basis of the study program bring high adaptability and high qualification of doctors for the most of requirements of their future creative practice in all areas of electronic engineering and communications.
The doctors are competent to work as scientists and researchers in many areas of basic research or research and development, as high-specialists in the development, design, construction, and application areas in many institutions, companies, and organisations of the electrical and electronic research, development, and industry as in the areas of communication and data transmission services and systems, inclusively in the special institutions of the state administration. In all of these branches they are able to work also as the leading scientific-, research-, development- or technical-managers.

Occupational profiles of graduates with examples

The doctors are able to solve scientific and complex engineering tasks from the area of electronics and communication. Wide fundamentals and deep theoretical basis of the study program bring high adaptability and high qualification of doctors for the most of requirements of their future creative practice in all areas of electronic engineering and communications.
The doctors are competent to work as scientists and researchers in many areas of basic research or research and development, as high-specialists in the development, design, construction, and application areas in many institutions, companies, and organizations of the electrical and electronic research, development, and industry as in the areas of communication and data transmission services and systems, inclusively in the special institutions of the state administration. In all of these branches they are able to work also as the leading scientific-, research-, and development- or technical-managers.

Supervisor

Issued topics of Doctoral Study Program

  1. Active Devices in Advanced Classes for Telecommunication Applications

    The aim of the project is in the solutions of amplifiers or multipliers in advanced classes E, F, G and other in the microwave band. These classes allow improving various parameters of standard circuits, such as efficiency, intermodulation level and others, depending on specific application. The change of parameters is done with the use of manipulation of harmonic frequencies of input signal. Work will focus also on output circuit design to realize necessary harmonic manipulation. In the work it will be necessary to simulate those circuits, to realize selected designs and select proper methodology of measurements in the case of designed circuits.

    Tutor: Urbanec Tomáš, Ing., Ph.D.

  2. Advanced EMI Filters Models

    The project is focused on the analysis of single-phase EMI filters. The analysis has to be focused on the uncertain impedance termination of the EMI filters. The termination has a dominant influence on the filter's insertion loss and also on so call "worst-case" performance. The results will be checked by a lot of measurements and also several mathematical analyses. For these analyses will be designed accurate filter's models.

    Tutor: Dřínovský Jiří, Ing., Ph.D.

  3. Advanced microwave systems for space communication

    At present, there are new interesting MIO based on GaN, discrete devices and new materials which allow to find solutions of microwave parts of the ground as well as the space segments on new principles. These are namely antenna feeds with integrated low noise amplifiers, power amplifiers, quadrature frequency converters, local oscillators with low phase noise, frequency filters, frequency synthesizers, modulators and demodulators. A part of the project will be studies of application possibilities, parameters analysis and designs of extensional units of a satellite communication chain.

    Tutor: Kasal Miroslav, prof. Ing., CSc.

  4. Advanced signal processing for LPWA technologies

    The new generation of Low Power Wide Area (LPWA) networks considers not only a huge amount of connected IoT devices, but also an extension of the features of LPWA technologies that are used by LPWA networks for different use cases. It is assumed that fields, where LPWA technologies can be used, will increase in the future. Hence, advanced signal processing to extend feature of LPWA technologies on physical layer (PHY) level will be necessary to fulfill requirements from both user and market parts. This dissertation thesis deals with the research of emerging signal processing techniques for different LPWA technologies (e.g. LoRa, INGENU) with attention on various use case scenarios and radio frequency bands. The work focuses on the implementing of multiple modulation schemes, on the techniques to increase bandwidth and data rate for different LPWA technologies according to basic features of LPWA technologies (e.g. long range communication, high energy efficiency, resistance against interferences). The aim of this work is to verify the proposed solutions and their analysis with appropriate simulation models (e.g. in MATLAB). Verification of the theoretical (simulation) results by measurement in laboratory conditions (e.g. SDR-USRP radio) is also considered. The outputs of the work should offer complementary trade-offs to match the range and data rate requirements of applications.

    Tutor: Polák Ladislav, doc. Ing., Ph.D.

  5. Analysis and simulation of a shared transmission channel for future wireless communication systems

    Doctoral thesis is focused on analysis of the modern and future wireless communication systems and their coexistence in a shared transmission channel. During the analysis, the systems like digital television broadcasting (eg. DVB-T/T2, NGH), standards for mobile communications (eg. GSM/UMTS/LTE), wireless communication systems (eg. ZigBee, BT, WLAN, WPAN) etc., have to be taken into account. Prerequisite of the successful solution is definition of the statistical model of the transmission channel with variable parameters and then its verification including simulated coexistence with various wireless services. The aim of the work is not only the model of the transmission channel, but also innovative algorithms of the wireless services separation that are optimized for the verified and shared transmission channel model.

    Tutor: Kratochvíl Tomáš, prof. Ing., Ph.D.

  6. Analysis and simulation of the transmission in the second generation digital television using spatial diversity technique

    The next generation of terrestrial digital video broadcasting standard (DVB-T2) incorporates the option of using multiple-input single-output (MISO) spatial diversity transmission technique. This dissertation thesis focuses on the exploring and analysis of signal transmission in the second generation terrestrial digital television standard (DVB-T2/T2-Lite) uses spatial diversity transmission techniques MISO and in the future MIMO. A prerequisite of such analysis is a creation of an appropriate simulation model, allows simulating and analysing of the signal transmission which consider multipath propagation with selective fading, and adjustable system parameters of the transmitter and receiver system blocks. A possible verification of theoretical (simulation) results by measurement either in a real environment or in laboratory conditions is also considered. The main aim of this work is the definition of the influence of the system parameters on the bit error rate (BER) and on the quality of the signal transmission.

    Tutor: Kratochvíl Tomáš, prof. Ing., Ph.D.

  7. Analysis of glottal pulses

    Proposed project deals with estimation and analysis of glottal pulses in speakers using speech signal. The aim of this project is development and testing of special algorithms for estimation of the waveform of pulses generated by glottis during speaking. The analysis of estimated pulses will be oriented to selected factors useful for medicinal diagnostics. Development of algorithms will be based on robust DSP methods. In addition, some specific databases in realistic conditions will be created.

    Tutor: Sigmund Milan, prof. Ing., CSc.

  8. Analysis of nonlinear electronic systems using Volterra series theory

    The aim of the project is to elaborate ways of description of nonlinear electronic systems using Volterra series theory and find effective methods of their solution. In theoretical part, existing methods will critically be evaluated and computationally more efficient procedures searched, including multivariate Laplace transform approach and related numerical techniques. Attention will be focused on use in the analysis of systems with distributed parameters with nonlinearities. In experimental part, dependencies between Volterra series kernels and X-parameters measured by nonlinear vector network analyzer are supposed to be exploited. Potential candidates should have an interest in applied mathematics and programming in MATLAB.

    Tutor: Brančík Lubomír, prof. Ing., CSc.

  9. Analysis of stochastic changes of interconnects parameters

    The aim of the project is to develop techniques of the analysis of stochastic changes of interconnects parameters in electronic systems on a basis of the theory of stochastic differential equations (SDE). The subject of the research will be devoted partly to the application of ordinary SDEs, useful to describe models with lumped parameters, and partly to the study of the applicability of partial SDEs, useful for continuous models based on the telegraphic equations. It is expected generalization of some proposed techniques towards the analysis of hybrid electronic systems based on stochastic differential-algebraic equations (SDAE). Effectiveness of the proposed methods will be evaluated by comparison with standard statistical approaches such as Monte Carlo method. Potential candidates should have an interest in applied mathematics and programming in MATLAB.

    Tutor: Brančík Lubomír, prof. Ing., CSc.

  10. Applications of electronically controllable bilinear two-ports for approximation of functional blocks with fractional order character

    This work deals with synthesis/approximation of network building blocks (integrator, derivator, etc.) of the fractional order circuit by help of chains of subparts employing bilinear transfer sections of the integer order where independent electronic control of the zero and pole location is allowed. This approximation (valid in limited frequency bandwidth) allows to obtain fractional exponent of the Laplace operator s and construction of the so-called “half integrator” (1/s^0.5) for example. The work in this topic is focused to circuit theory but partial results will be verified experimentally with attention to suitable practical applications and applications in smart components of physical layer of communication systems.

    Tutor: Šotner Roman, doc. Ing., Ph.D.

  11. Automated detection of alcohol by voice analysis

    Proposed project is oriented to detection of alcohol using signal analysis of phone speech. The aim of this project is development and testing of special algorithms for investigation of alcohol intoxication in low level which is not audible but affect the activity and behaviour of persons. Development of algorithms will be based on robust DSP methods applicable both in real-time analysis and stored signal analysis. In addition, some specific databases under realistic conditions will be created.

    Tutor: Sigmund Milan, prof. Ing., CSc.

  12. Coexistence between wireless LPWAN and WLAN networks in shared radio frequency bands

    In the near feature, Low Power Wide Area Network (LPWAN) services can be also provided in higher radiofrequency bands. Hence, different LPWAN technologies (e.g. LoRa, Ingenu), originally developed for sub-GHz bands, can be exploit in the RF bands, where technologies of WLAN (e.g. IEEE 802.11, 802.15.4k/g) are utilized. This dissertation thesis focuses on the definition and exploring of possible coexistence scenarios between wireless communication systems LPWAN a WLAN in a shared RF band. Such coexistence scenarios can be critical (a partial or full loss of wireless services, provided by communication systems) and non-critical (both communication systems can coexist without significant performance degradation). The aim of this work is to verify the defined coexistence scenarios and their analysis with appropriate simulation models (e.g. in MATLAB). Verification of the theoretical (simulation) results by measurement either in a real environment or in laboratory conditions (e.g. SDR-USRP radio) is also considered. Based on the obtained results, recommendations for a coexistence-free operation of wireless communication systems in shared RF bands will be defined.

    Tutor: Polák Ladislav, doc. Ing., Ph.D.

  13. Determination of the limits of the quantitative parameters in optical wireless communication

    The work is focused on the study of atmospheric turbulence, which is an important factor affecting the properties of optical radiation. The work consists of detailed analysis of the turbulent media and describes horizontal and vertical models of the atmosphere. The methodology for quantification of the degree of turbulence considering the needs of optical wireless communication is the next point of the work. The main goal of the work is to determine the maximum achievable transmission rate in the optical wireless links. The dependence of the transmission rate on the degree of atmospheric turbulence and on the wavelength of the optical carrier for the various types of optical beams with respect to the used modulation and coding techniques will be examined. The analysis of bit error rate during the operation of optical wireless link in turbulent atmosphere should be a part of the work. The project is in large part experimental.

    Tutor: Hudcová Lucie, doc. Ing., Ph.D.

  14. Distributed receiving system for satellite communication

    The project is aimed at study of synchronized distributed SDR receivers performance and at their application for satellite communication. The proposed system should allow simultaneous reception and data extraction from multiple signals. The main target of the study is enhancement of error-free data reception probability, exploitation of distributed system gain and stations redundancy. System is determined for data reception from experimental satellites in UHF band.

    Tutor: Urbanec Tomáš, Ing., Ph.D.

  15. Electronically controllable oscillators of higher and fractional orders

    Research is focused on modeling, simulations and experimental verification of circuit realizations of higher-order harmonic oscillators and inharmonic generators for structures of physical layer of communication systems working in base and inter-frequency band. The main task is to found features and application possibilities of circuits with higher order than 3 and circuits defined by differential equations of fractional order. An attention will be concentrated on frequency tunability, phase and magnitude relations between generated signals and suitable amplitude stabilization especially. Part of the work deals with detailed description of signal generation based on linear and nonlinear mathematical operations that are allowed by implementation of so-called constant phase elements producing constant phase shift between excitation signal and response.

    Tutor: Šotner Roman, doc. Ing., Ph.D.

  16. Evaluating quality of service in mobile networks through crowdsourcing

    Usually, measurement of mobile cellular network quality parameters is done through measurement campaigns, where a large number of measurements are performed at pre-selected sites using dedicated measurement devices. The results of such analyzes have only such predictive power, how not only is the measurement methodology suitable, but especially the choice of measuring locations and the frequency of measurements. Because the network operating parameters are greatly affected by the instantaneous load, it is virtually impossible to determine the actual data rate achieved by the user based on conventional tests. The crowdsourcing concept is based on taking measurements from the users themselves, who, through the application on their mobile device, receive a sample of measurements and send it automatically to the experimenter. However, this comes at the price of including the tariff of the user and other aspects into the measurement making it complex to derive a network benchmark. The project is focused on the research of methods of measurements performed in this way in order to understand the limits and strength of each approach, in order to enable an increase of accuracy and informative value of the results obtained by the classical approach.

    Tutor: Slanina Martin, doc. Ing., Ph.D.

  17. Channel models for future generations of communication systems

    Current trends in wireless communications tend to transfer continuously growing volumes of data in very complex time-varying urban environments, specially indoor and outdoor areas. For the successful design of appropriate communication systems it is necessary to thoroughly know the nature of the transmission environment. The aim of the project is to investigate the properties of non-stationary transmission channels in millimetre waves. It will be examined the temporal and spatial characteristics of the channel based on the measured data as well as evaluation of their statistical properties. Based on the data it will be designed and experimentally validated models of channels.

    Tutor: Poměnková Jitka, doc. RNDr., Ph.D.

  18. Channel models for future generations of mobile networks

    Steadily growing number of communication devices per area and increasing quality of services require allocation of more frequency resources. Millimeter wave (MMW) frequencies between 30 and 300 GHz have been attracting growing attention as a possible candidate for next-generation broadband cellular networks. Specific limitations of MMW signal propagation, extremely large bandwidth and time variable environment caused by mobile users connected to a backhaul networks traveling in rugged municipal environments create unprecedented challenges to the development of broadband communication systems using advanced technologies for eliminating the undesirable time varying channel features. The aim of the project is measurement and modelling of the broadband non-stationary MMW channels between mobile users and infrastructure dominantly in time and spatial domain to analyze the effects of environment and weather conditions and evaluate feasibility of advanced techniques such as beamforming or massive MIMO spatial multiplexing implementation.

    Tutor: Prokeš Aleš, prof. Ing., Ph.D.

  19. Impact of dynamic environmental phenomena on the quality of service in wireless networks

    Wireless communication systems are characterized by their sensitivity to environmental influences - such as changes in network properties, change of propagation conditions (temperature, humidity, vegetation, solar activity), radio environment (interference, multipath propagation), load (multiple access and capacity) and interference from neighboring cells. Each of these dynamic phenomena is characterized by slower or faster state changes. When evaluating the quality of service and the quality of experience in wireless networks, we usually do not consider the effects of these phenomena because they change orders of magnitude more slowly compared to the acquisition time of network benchmarking measurements. However, without an in depth understanding of this process it is not feasible to fuse measurements collected over a very long period of time, e.g., years of crowdsourced data The aim of the experimental part of the project is to propose a suitable methodology for obtaining a sufficiently large number of measuring observations characterizing the selected radio link or selected site in the cellular network. The analytical part of the work will focus on the use of other data sources (satellite data from Earth, weather data, traffic information) to formulate models of influence on a selected type of wireless system in order to maximize the accuracy of service quality prediction at a given time and place.

    Tutor: Slanina Martin, doc. Ing., Ph.D.

  20. Learning deep architectures

    Deep architectures are composed of multiple levels of non-linear operations (e.g., artificial neural networks with hidden layers). Searching the parameter space of deep architectures is a difficult task, but learning algorithms have been recently proposed to tackle this problem. The project is focused on a detailed study of deep architectures and their learning, on their software implementation using parallel computing, and their applications in field of computational electromagnetics.

    Tutor: Raida Zbyněk, prof. Dr. Ing.

  21. Measurement prediction of the disturbance power on the level of a numerical model of a car

    Today's development of methods in vehicular industry is more and more frequently represented by numerical simulations and building virtual prototypes. In order to build the virtual prototype from the EMC viewpoint, disturbance sources have to be predicted with a satisfactory reliability. This aim can be reached by exploiting described disturbance sources developed in frame of previous car projects and by developing the methodology of predicting these disturbance sources in a new, unknown environment. The project comprises theoretical analysis of researched problems, numerical simulations verifying fundamental designed principles of the prediction, and the final verification of the reliability of the solution by measurements on real cars.

    Tutor: Raida Zbyněk, prof. Dr. Ing.

  22. Methods for approximate symbolic analysis

    The project is focused on research and implementation of methods for symbolic and semi-symbolic analysis of linear or linearized electronic circuits. The aim is to develop new methods for so-called approximate symbolic analysis of large systems based on topological approach that respects physical relations in circuit. The methods have a potential to provide simply interpretable results. It is expected the new methods will be used in the process of integrated circuit design and testing. Part of the project consists in implementing of developed algorithms and their inclusion into the SNAP program.

    Tutor: Kolka Zdeněk, prof. Dr. Ing.

  23. Methods of multiple access and beamforming for future mobile networks

    Ever increasing demands for high-speed transmission in mobile networks lead to the use of increasingly higher frequency bands. In the area of millimeter wave band there is a sufficient bandwidth but extremely growing path loss. The short wavelengths, however, allow to realize tiny antennas and combine them into arrays offering a large gain, that are able significantly eliminate the path loss. The project is aimed at the research and development of algorithms for adaptive beamforming in combination with massive MIMO that would be able to combine optimally both approaches depending on the channel state and user requirements. The project includes study of a possible hardware implementation of the proposed algorithms and methods of antenna arrays control.

    Tutor: Prokeš Aleš, prof. Ing., Ph.D.

  24. Methods of multiple access and beamforming for future mobile networks

    Ever increasing demands for high-speed transmission in mobile networks lead to the use of increasingly higher frequency bands. In the area of millimeter wave band there is a sufficient bandwidth but extremely growing path loss. The short wavelengths, however, allow to realize tiny antennas and combine them into arrays offering a large gain, that are able significantly eliminate the path loss. The project is aimed at the research and development of algorithms for adaptive beamforming in combination with massive MIMO that would be able to combine optimally both approaches depending on the channel state and user requirements. The project includes study of a possible hardware implementation of the proposed algorithms and methods of antenna arrays control.

    Tutor: Prokeš Aleš, prof. Ing., Ph.D.

  25. Microwave structures on synthetic substrates

    The project is focused on the investigation of microwave structures based on synthetic substrates. The attention should be mainly focused on the development of substrates with desired spatial distribution of electromagnetic properties. For that work, optimization algorithms should be exploited or developed. Created substrates should be exploited for novel concepts of microwave circuits and antennas.

    Tutor: Láčík Jaroslav, doc. Ing., Ph.D.

  26. New active elements combining more ways of electronic control and their applications

    This topic is focused on study of novel principles of electronic control in the frame of internal architecture of an active element. It extends performances of existing active elements such as: current conveyors, transconductors, current and voltage amplifiers, etc. These elements offer only one adjustable parameter in most cases. Main goals are identification of hitherto unpublished possibilities of the control in the frame of one block or simple combination of several basic sub-blocks. Investigation of this active device will be provided by ideal models, behavioral models (emulators) based on commercially available devices and their realization in suitable CMOS technology. Verification of usability of these active elements in suitable standard and smart circuit applications is also supposed.

    Tutor: Šotner Roman, doc. Ing., Ph.D.

  27. Novel analog blocks and concepts for processing of electrical and nonelectrical quantities

    The integrated circuits are very important for processing of signals from sensors and sensor readouts as a part of modern physical layer of communication systems. They offer significant minimization of system area and low power consumption. Therefore, these concepts are highly useful for biomedical applications (blood analysis – presence of various chemicals, bioimpedances measurement and evaluation, etc.), in mechanics (distance influences capacity), etc. This topic includes study of utilization of of-the-shelf as well as custom integrated active building cells and blocks (amplifiers, converters, generators, flip-flop circuits, etc.) and study of features of currently available types of sensors for various physical quantities. The recommendations, requirements and methodologies for active sensor readouts in processing of signals are expected to be formulated. Works in this topic supposes implementation of own novel integrated cells or utilization of already available devices (designed in ON Semiconductor/AMIS 0.35 um or TSMC 0.18 um CMOS process) at the workplace.

    Tutor: Šotner Roman, doc. Ing., Ph.D.

  28. Passive localization of experimental satellites in low earth orbits

    The aim of the project is a study of actual signals from experimental satellites and its influence on localization. Part of the work will be a study of error sources as atmosperic influence and parameters of SDR receivers. Measurement with multiple of SDR receivers will follow to get experimental data for localization implementation. The research then will be targeted to optimal solutions for high precision, resolution and other parameters of realized system.

    Tutor: Urbanec Tomáš, Ing., Ph.D.

  29. Perspective methods for precise positioning in wireless sensor networks

    Nowadays, we have numerous methods for localization of persons or wireless sensors in networks. In the future, due to emerging wireless communication techniques (e.g. IoT communication and protocols, communication in mmW bands), it is assumed that current methods and techniques used for localization will need improvement or extension with new ones. Utilization of Machine Learning in this field seems to be a promising way. This dissertation deals with the research of methods (SW and HW systems) for a precise localization of wireless sensors and persons. The work should focus on the analysis of current methods and their optimization for different wireless communication techniques, utilized in a wide range of radio frequency bands. Utilization of the basics of Machine Learning and their application in this field to achieve high localization accuracy is assumed. Verification of the theoretical results by measurements in laboratory and real conditions (indoor and outdoor environment) is considered.

    Tutor: Polák Ladislav, doc. Ing., Ph.D.

  30. Probabilistic models for communications of autonomous vehicles

    The autonomous vehicles will need to cope with unpredictable behavior of other, non-autonomous, objects (pedestrians, conventional vehicles). To maintain the safety requirements, usage of so-called Ultra Reliable Low Latency Communications (URLLC) as a part of 5G communication standards is expected. The focus of the work will be on research of probabilistic models (Gaussian processes, Markov chains, time-frequency point processes etc.) and analysis of their suitability for modeling of communications between autonomous vehicles.

    Tutor: Maršálek Roman, prof. Ing., Ph.D.

  31. Receiving of very weak radiofrequency signals

    Reception of microwave signals coming from the universe is characterized by very low Eb/N0 ratio. That is mostly concerned with phase or frequency shift keying of a carrier or sub-carrier. Reduced bandwidth is applied for AWGN elimination as the signal’s source increases. For this reason very high frequency stability has to be achieved by locking to an atomic frequency standard as well as precise compensation of Doppler shift. Basic requirement is a low value of equivalent system’s noise temperature achievement, related to optimized radiated pattern of the parabolic reflector feed. A part of the project is also methodology of the system sensitivity measurement by means of extraterrestrial noise sources.

    Tutor: Kasal Miroslav, prof. Ing., CSc.

  32. Sensor networks for vehicles

    One of the ways reducing the cost and consumption of cars, aircrafts, and other transport vehicles is the replacement of expensive and relatively heavy wiring harness interconnecting tens to hundreds of sensors and actuators with control unit by a wireless network. Multipath propagation of signals in a noisy environment and coordination of a mutual communication, however, requires the use of special techniques and signal processing algorithms. The aim of the project is design and optimization of the multi-hop sensor network. The appropriate modulation, methods of equalization and error correction, etc. on the physical layer and methods of communication resources allocation and coordination of data transfer at higher layers will be investigated.

    Tutor: Prokeš Aleš, prof. Ing., Ph.D.

  33. Smart coexistence of wireless communication systems

    Nowadays, different wireless communication systems are available that, in the future, will share a high part of RF bands with each other. Hence, coordinated coexistence of these systems will be necessary. Cognitive radio, RF spectrum sensing and Machine Learning are emerging techniques in this field. This dissertation thesis deals with the research of emerging methods that enable a smart coexistence of wireless communication systems, utilized in a wide range of RF bands. The work should focus on the analysis of current methods and their optimization to a right evaluation of the interfering signal, types of interfering systems and parameters that describe the wireless system. Based on the obtained results, there should be proposed steps to minimize possible interference between coexisting systems. Verification of the theoretical results by measurement either in a real environment or in laboratory conditions (e.g. SDR-USRP radio) is considered. Based on the obtained results, recommendations for a coexistence-free operation of wireless communication systems in shared RF bands will be defined.

    Tutor: Polák Ladislav, doc. Ing., Ph.D.

  34. Space time characteristics of optical transmission channel

    The object of the research project consists in developing the temporal and spatial properties of the optical transmission channel for optical wireless links. The research will be focused on the non-stationarity and inhomogeneity of the atmosphere affecting signal transmission. Atmospheric phenomena affecting optical beam parameters will be analyzed and modeled. The experimental work will be focused on obtaining data showing the degree of non-stationarity and inhomogeneity of the atmospheric transmission environment. Subsequent synthesis will create a model of the optical channel for the horizontally split transmission route.

    Tutor: Wilfert Otakar, prof. Ing., CSc.

  35. Tunability range extensions in electronically controllable circuits

    Decreasing value of power supply voltage creates limited conditions for electronic tuning of circuits (for example active filters) in comparison to standard current systems operating with high DC power supply. The main task of this work focuses on research and study of methods of electronic control of applications (for example filters and oscillators) working as components of modern communication systems. Suitable combination of features for control of active elements and change of character of dependence (e.g. oscillation frequency vs. adjustable parameter) serve for substantial improvement of tunability range of application. Verification of intended methods supposes PSpice and Cadence IC6 (low voltage technologies AMIS 0.35 um, TSMC 0.18 um) simulations and experiments.

    Tutor: Šotner Roman, doc. Ing., Ph.D.

  36. Using FPGAs to accelerate deep learning algorithms

    Deep learning algorithms utilize extremely large data sets, and therefore their complexity is extensive. General-purpose computing on graphics processing units (GPGPUs) are commonly used to accelerate calculations. FPGAs are less widespread, although they offer much greater flexibility in hardware configuration and better energy requirements. The main goals of the Ph.D. project will assess the use of FPGA for acceleration of deep learning algorithms, validation of time and energy requirements with a focus on one type of application, e.g. computer vision.

    Tutor: Frýza Tomáš, doc. Ing., Ph.D.

  37. Wideband linearization of RF power amplifiers

    The topic of dissertation is oriented into the domain of RF amplifier linearization by input signal predistortion. The goal is to design the linearizer able to work with wide bandwidths of hundreds of MHz.

    Tutor: Maršálek Roman, prof. Ing., Ph.D.

  38. Wideband Vector Measurements

    The aim of the project is the study of operation theory and proposition of new solutions for wideband microwave vector measurement system with the main orientation to the sixport measurement methods. Actual used systems are dedicated to lower microwave frequencies and from technological point of view they are not applicable to higher frequencies. Research of the necessary calibration sets and basic function methods is also included in the project. Also the study of parameter details of measurement systems and modeling of their behavior with the changes in environment, long term stability etc. will be contained in the research project.

    Tutor: Urbanec Tomáš, Ing., Ph.D.


Course structure diagram with ECTS credits

1. year of study, winter semester
AbbreviationTitleL.Cr.Sem.Com.Compl.Gr.Op.
DET1Electrotechnical materials, material systems and production processescs4winterOptional specializedDrExyes
DEE1Mathematical Modelling of Electrical Power Systemscs4winterOptional specializedDrExyes
DME1Microelectronic Systemscs4winterOptional specializedDrExyes
DRE1Modern electronic circuit designcs4winterOptional specializedDrExyes
DTK1Optimization Methods and Queuing Theorycs4winterOptional specializedDrExyes
DFY1Junctions and nanostructurescs4winterOptional specializedDrExyes
DTE1Special Measurement Methodscs4winterOptional specializedDrExyes
DMA1Statistics, Stochastic Processes, Operations Researchcs4winterOptional specializedDrExyes
DAM1Selected chaps from automatic controlcs4winterOptional specializedDrExyes
DVE1Selected problems from power electronics and electrical drivescs4winterOptional specializedDrExyes
DBM1Advanced methods of processing and analysis of imagescs4winterOptional specializedDrExno
DJA6English for post-graduatescs4winterGeneral knowledgeDrExyes
DRIZSolving of innovative taskscs2winterGeneral knowledgeDrExyes
DEIZScientific publishing A to Zcs2winterGeneral knowledgeDrExyes
1. year of study, summer semester
AbbreviationTitleL.Cr.Sem.Com.Compl.Gr.Op.
DTK2Applied cryptographycs4summerOptional specializedDrExyes
DMA2Discrete Processes in Electrical Engineeringcs4summerOptional specializedDrExyes
DME2Microelectronic technologiescs4summerOptional specializedDrExno
DRE2Modern digital wireless communicationcs4summerOptional specializedDrExyes
DTE2Numerical Computations with Partial Differential Equationscs4summerOptional specializedDrExyes
DFY2Spectroscopic methods for non-destructive diagnostics cs4summerOptional specializedDrExno
DET2Selected diagnostic methods, reliability and qualitycs4summerOptional specializedDrExyes
DAM2Selected chaps from measuring techniquescs4summerOptional specializedDrExno
DBM2Selected problems of biomedical engineeringcs4summerOptional specializedDrExno
DEE2Selected problems of electricity productioncs4summerOptional specializedDrExyes
DVE2Topical Issues of Electrical Machines and Apparatuscs4summerOptional specializedDrExyes
DJA6English for post-graduatescs4summerGeneral knowledgeDrExyes
DCVPQuotations in a research workcs2summerGeneral knowledgeDrExyes
DRIZSolving of innovative taskscs2summerGeneral knowledgeDrExyes
1. year of study, both semester
AbbreviationTitleL.Cr.Sem.Com.Compl.Gr.Op.
DQJAEnglish for the state doctoral examcs4bothCompulsoryDrExyes