Publications

• 2022

  HADAŠ, Z.; RUBEŠ, O.; KŠICA, F.; MAJER, Z.; MONCMAN, M.; CHALUPA, J. Passing Train as Source of Energy for Autonomous LoRa Monitoring System. In Montpellier: Elsevier, 2022.
  Detail

• 2020

  ŠEVEČEK, O.; HANÁK, J.; MAJER, Z.; DRDLÍK, D.; CHLUP, Z.; KOTOUL, M. Prediction of the ceramic foam structure failure using a detailed finite element model. In Advances in Fracture and Damage Mechanics XVIII. Key Engineering Materials (print). 1. Švýcarsko: Trans Tech Publications Ltd, 2020. p. 222-227. ISBN: 9783035715866. ISSN: 1013-9826.
  Detail | WWW

  ŠEVEČEK, O.; PAPŠÍK, R.; MAJER, Z.; KOTOUL, M. Influence of the cell geometry on the tensile strength of open-cell ceramic foams. In 9th International Conference Materials Structure & Micromechanics of Fracture (MSMF9). Procedia Structural Integrity. Itálie: Elsevier, 2020. p. 553-558. ISSN: 2452-3216.
  Detail | WWW | Full text in the Digital Library

  MAJER, Z.; ŠEVEČEK, O.; ŠTEGNEROVÁ, K.; RUBEŠ, O.; TOFEL, P.; HADAŠ, Z. Analysis of maximal operation amplitudes of piezoelectric vibration energy harvesters. In Advances in Fracture and Damage Mechanics XVIII. Key Engineering Materials (print). 1. Švýcarsko: Trans Tech Publications Ltd, 2020. p. 324-329. ISBN: 9783035715866. ISSN: 1013-9826.
  Detail | WWW

• 2019

  RAIF, L.; PLÁŠEK, O.; KOMÁREK, M.; MAREK, T.; MAJER, Z. PROJEKT S-CODE: NOVÉ KONCEPTY VÝHYBEK. In Súčasné problémy v kolajových vozidlách - PRORAIL 2019. Diel II. Žilina, Slovenská republika: VTS pri Žilinskej univerzite v Žiline, 2019. p. 155-162. ISBN: 978-80-89276-59-2.
  Detail

  ŠEVEČEK, O.; BERTOLLA, L.; CHLUP, Z.; ŘEHOŘEK, L.; MAJER, Z.; MARCIÁN, P.; KOTOUL, M. Modelling of cracking of the ceramic foam specimen with a central notch under the tensile load. Theoretical and Applied Fracture Mechanics, 2019, vol. 100, no. 1, p. 242-250. ISSN: 0167-8442.
  Detail | WWW

  TOFEL, P.; MACHŮ, Z.; CHLUP, Z.; HADRABA, H.; DRDLÍK, D.; ŠEVEČEK, O.; MAJER, Z.; HOLCMAN, V.; HADAŠ, Z. Novel layered architecture based on Al2O3/ZrO2/BaTiO3 for SMART piezoceramic electromechanical converters. European Physical Journal-Special Topics, 2019, vol. 228, no. 7, p. 1575-1588. ISSN: 1951-6355.
  Detail | WWW

  MACHŮ, Z.; MAJER, Z.; HADAŠ, Z.; ŠEVEČEK, O. Crack propagation analysis in multilayer piezoelectric energy harvester. In 9th International Conference on Materials Structure and Micromechanics of Fracture (MSMF9). Procedia Structural Integrity. 1. Brno: Elsevier B.V., 2019. p. 535-540. ISBN: 9781713807575. ISSN: 2452-3216.
  Detail | WWW

• 2018

  ŠEVEČEK, O.; MAJER, Z.; MARCIÁN, P.; BERTOLLA, L.; KOTOUL, M. Computational Analysis of Crack-Like Defects Influence on the Open Cell Ceramic Foam Tensile Strength. In Advances in Fracture and Damage Mechanics XVII. Key Engineering Materials (print). Švýcarsko: Trans Tech Publications, 2018. p. 271-276. ISBN: 9783035713503. ISSN: 1013-9826.
  Detail | WWW

  NÁHLÍK, L.; MAJER, Z.; ŠTEGNEROVÁ, K.; HUTAŘ, P. Lifetime Assessment of Particulate Ceramic Composite with Residual Stresses. In Advances in Fracture and Damage Mechanics XVI. Key Engineering Materials (web). Zürrich, Switzerland: Trans Tech Publications Inc., 2018. p. 107-110. ISBN: 978-3-0357-1168-4. ISSN: 1662-9795.
  Detail | WWW

  MAJER, Z.; ŠEVEČEK, O.; MACHŮ, Z.; ŠTEGNEROVÁ, K.; KOTOUL, M. Optimization of design parameters of fracture resistant piezoelectric vibration energy harvester. In Key Engineering Materials. Key Engineering Materials (print). 774. Trans Tech Publications Ltd, 2018. p. 416-422. ISBN: 9783035713503. ISSN: 1013-9826.
  Detail | WWW

  ŠTEGNEROVÁ, K.; MAJER, Z.; HUTAŘ, P.; NÁHLÍK, L. 3D Model of Crack Propagation in Particulate Ceramic Composite Containing Residual Stresses. In Advances in Fracture and Damage Mechanics XVI. Key Engineering Materials (print). Zürrich, Switzerland: Trans Tech Publications Inc., 2018. p. 103-106. ISBN: 9783035713503. ISSN: 1013-9826.
  Detail | WWW

  MACHŮ, Z.; ŠEVEČEK, O.; MAJER, Z.; HADAŠ, Z.; KOTOUL, M. Optimization of the electro-mechanical response of the multilayer piezoelectric energy harvester. In Proceedings of the 2018 18th International Conference on Mechatronics – Mechatronika (ME). 1. Brno: Brno University of Technolgy, 2018, 2018. p. 143-148. ISBN: 978-80-214-5543-6.
  Detail | WWW

  MACHŮ, Z.; MAJER, Z.; ŠEVEČEK, O.; ŠTEGNEROVÁ, K.; HADAŠ, Z. Electro-mechanical analysis of a multilayer piezoelectric cantilever energy harvester upon harmonic vibrations. In MATEC Web of Conferences. MATEC Web of Conferences. 210. EDP Sciences, 2018. p. 1-6. ISSN: 2261-236X.
  Detail | WWW | Full text in the Digital Library

• 2017

  ŠEVEČEK, O.; MAJER, Z.; BERTOLLA, L.; CHLUP, Z.; KOTOUL, M. Fracture-Mechanics Behaviour of Ceramic Foam with Macroscopic Stress Concentrator upon the Tensile Test. In Advances in Fracture and Damage Mechanics XVI. Key Engineering Materials (web). Švýcarsko: Trans Tech Publications, 2017. p. 99-102. ISBN: 978-3-0357-1168-4. ISSN: 1662-9795.
  Detail

  MAJER, Z.; ŠTEGNEROVÁ, K.; HUTAŘ, P.; PLETZ, M.; BERMEJO, R.; NÁHLÍK, L. Residual Lifetime Determination of Low Temperature Co-Fired Ceramics. In Advances in Fracture and Damage Mechanics XV. Key Engineering Materials (web). Zürrich, Switzerland: Trans Tech Publications Inc., 2017. p. 266-269. ISBN: 978-3-03835-716-2. ISSN: 1662-9795.
  Detail | WWW

  ŠEVEČEK, O.; MAJER, Z.; KOTOUL, M. INFLUENCE OF CERAMIC FOAM PARAMETERS ON THE FRACTURE BEHAVIOUR UPON THE TENSILE TEST. In Engineering Mechanics 2017. Engineering mechanics 2014. Praha: ACAD SCI CZECH REPUBLIC, INST THERMOMECHANICS, DOLEJSKOVA 5, PRAGUE 8, 182 00, CZECH REPUBLIC, 2017. p. 862-865. ISBN: 978-80-214-5497-2. ISSN: 1805-8248.
  Detail

  MAJER, Z.; NÁHLÍK, L.; ŠTEGNEROVÁ, K.; HUTAŘ, P.; BERMEJO, R. Study of Influence of Residual Stresses on Crack Propagation in Particulate Ceramic Composites. In MSMF8. International Conference on Materials Structure and Micromechanics of Fracture. Solid State Phenomena. 8. Zürrich, Switzerland: Trans Tech Publications Inc., 2017. p. 178-181. ISBN: 978-3-03835-626-4. ISSN: 1662-9779.
  Detail | WWW

• 2016

  ŠTEGNEROVÁ, K.; NÁHLÍK, L.; HUTAŘ, P.; POKORNÝ, P.; MAJER, Z. Influence of residual stresses and particle properties on mechanical response of the material in particulate ceramic composites. Key Engineering Materials (print), 2016, vol. 1, no. 713, p. 212-215. ISSN: 1013-9826.
  Detail | WWW

  NEZBEDOVÁ, E.; KRČMA, F.; MAJER, Z.; HUTAŘ, P. Effect of particles size on mechanical properties of polypropylene particulate composites. International Journal of Structural Integrity, 2016, vol. 7, no. 5, p. 690-699. ISSN: 1757-9864.
  Detail | WWW

  MAJER, Z.; NÁHLÍK, L.; HUTAŘ, P. The Role of Residual Stresses in Particulate Composite with Glass Matrix. Key Engineering Materials (print), 2016, vol. 665, no. 1, p. 173-176. ISSN: 1013-9826.
  Detail | WWW

  MAJER, Z.; HUTAŘ, P.; FRANK, A.; ŠEVČÍK, M.; ZOUHAR, M.; PINTER, G.; NÁHLÍK, L. Point load effect on the buried polyolefin pipes lifetime. Polymer Engineering & Science, 2016, vol. 56, no. 1, p. 79-86. ISSN: 1548-2634.
  Detail | WWW

• 2015

  MAJER, Z.; NÁHLÍK, L.; MALÍKOVÁ, L. Particulate Composite Damage: The Influence of Particle Shape on Crack Path. Key Engineering Materials (print), 2015, vol. 662, no. 1, p. 77-80. ISSN: 1013-9826.
  Detail | WWW

  MAJER, Z.; ŠEVČÍK, M.; NÁHLÍK, L.; HUTAŘ, P. Point load effect determination for different pressure pipe SDR series. In Advances in Fracture and Damage Mechanics XIII. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2015. p. 373-376. ISBN: 978-3-03835-235-8. ISSN: 1013-9826.
  Detail

• 2014

  MARCIÁN, P.; VALÁŠEK, J.; HRSTKA, M.; MAJER, Z.; ŠEVEČEK, O.; PROFANT, T.; DLOUHÝ, I.; FLORIAN, Z. Computational Modeling of Porous Ceramics with Bioactive Layer. In MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE VII. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. p. 378-381. ISBN: 978-3-03785-934-6. ISSN: 1013-9826.
  Detail

  NÁHLÍK, L.; ŠTEGNEROVÁ, K.; HUTAŘ, P.; MAJER, Z. Critical Value for Crack Propagation from Sharp V- notch. Key Engineering Materials (print), 2014, vol. 592- 593, no. 1, p. 177-180. ISSN: 1013- 9826.
  Detail

  MAJER, Z.; PLETZ, M.; KRAUTGASSER, C.; NÁHLÍK, L.; HUTAŘ, P.; BERMEJO, R. Numerical Analysis of Sub-Critical Crack Growth in Particulate Ceramic Composites. Procedia Materials Science, 2014, vol. 3, no. 1, p. 2071-2076. ISSN: 2211-8128.
  Detail

  MAJER, Z.; HUTAŘ, P.; ŠEVČÍK, M.; NÁHLÍK, L. Particulate Composite Damage: Numerical Estimation of Micro-Crack Paths. In Local Mechanical Properties X. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. p. 261-264. ISBN: 978-3-03835-062-0. ISSN: 1013-9826.
  Detail

  MAJER, Z.; NÁHLÍK, L. NUMERICAL ESTIMATION OF MICRO-CRACK PATHS IN POLYMER PARTICULATE COMPOSITE. In Engineering Mechanics 2014. 1. 2014. p. 376-379. ISBN: 978-80-214-4871-1.
  Detail

  MAJER, Z.; MARCIÁN, P.; NÁHLÍK, L.; HUTAŘ, P.; KNÉSL, Z. Particulate Composite Damage: Numerical Estimation of Micro-Crack Propagation Direction. In MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE VII. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. p. 445-448. ISBN: 978-3-03785-934-6. ISSN: 1013-9826.
  Detail

  MAJER, Z.; NÁHLÍK, L. Influence of Interphase Imperfection on Micro-Crack Behavior in Polymer Composites Filled by Rigid Particles. In Local Mechanical Properties IX. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. p. 194-197. ISBN: 978-3-03785-876-9. ISSN: 1013-9826.
  Detail

  MAJER, Z.; ZOUHAR, M.; ŠEVČÍK, M.; NÁHLÍK, L.; HUTAŘ, P. Pressure pipe damage: Numerical estimation of point load effect II. In Advances in Fracture and Damage Mechanics XII. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. p. 533-536. ISBN: 978-3-03785-830-1. ISSN: 1013-9826.
  Detail

• 2013

  MAJER, Z. Load Influence on the Behavior of Micro- crack in the Particulate Composite. Key Engineering Materials, 2013, vol. 525- 526, no. 1, p. 173-176. ISSN: 1013- 9826.
  Detail

  MAJER, Z.; HUTAŘ, P.; NÁHLÍK, J. Determination of the Effect of Interphase on Fracture Toughness and the Stiffness of a Polymer Particulate Composite. MECHANICS OF COMPOSITE MATERIALS, 2013, vol. 49, no. 5, p. 1-12. ISSN: 0191- 5665.
  Detail

  MAJER, Z. Dependence of Micro-Crack Propagation on Different Type of Non- Linear Matrix Used in Particulate Composite. ADV SCI LETT, 2013, vol. 19, no. 2, p. 626-629. ISSN: 1936- 6612.
  Detail

• 2012

  MAJER, Z.; NÁHLÍK, L. Micro- Crack Propagation in Particulate Composite with Different Types of Matrix. Applied Mechanics and Materials, 2012, vol. 245, no. 1, p. 138-143. ISSN: 1660- 9336.
  Detail

  MARCIÁN, P.; MAJER, Z.; DLOUHÝ, I.; FLORIAN, Z. Estimation of Local Mechanical Properties of Highly Porous Ceramic Materials. Chemické listy, 2012, vol. 106, no. 1, p. 476-477. ISSN: 0009- 2770.
  Detail

  MARCIÁN, P.; BORÁK, L.; MAJER, Z.; FLORIAN, Z.; KAISER, J.; KONEČNÁ, V. The computational model of dental implant interaction with bone tissue. In Computer Methods in Biomechanics and Biomedical Engineering 2012. Berlín: British Library Cataloguing in Publication Data, 2012. p. 910-915. ISBN: 978-0-9562121-5- 3.
  Detail

  MAJER, Z.; HUTAŘ, P. The Effect of Nonlinear Matrix on Crack Propagation in the Particulate Composite. Key Engineering Materials (print), 2012, vol. 488- 489, no. 1, p. 484-487. ISSN: 1013- 9826.
  Detail

  MAJER, Z.; NÁHLÍK, L. MICRO-CRACK BEHAVIOUR IN POLYMER MATRIX OF PARTICULATE COMPOSITE: INFLUENCE OF NON- LINEAR MATRIX. Chemické listy, 2012, vol. 106, no. 1, p. 472-473. ISSN: 0009- 2770.
  Detail

  MAJER, Z.; MARCIÁN, P.; DLOUHÝ, I.; FLORIAN, Z.; ŘEHOŘEK, L.; MALINA, R. Computational modeling of highly porous materials with application in biomechanics. In Computer Methods in Biomechanics and Biomedical Engineering 2012. Berlín: British Library Cataloguing in Publication Data, 2012. p. 916-921. ISBN: 978-0-9562121-5- 3.
  Detail

  MAJER, Z.; NÁHLÍK, L.; HUTAŘ, P. The Estimation of Micro- crack Behavior in Polymer Particulate Composite with Soft Interphase. Advanced Materials Research, 2012, vol. 482- 484, no. 1, p. 1660-1663. ISSN: 1022- 6680.
  Detail

  MARCIÁN, P.; MAJER, Z.; FLORIAN, Z.; DLOUHÝ, I. Stress Strain Analysis of High Porous Ceramics. Advanced Materials Research, 2012, vol. 482- 484, no. 1, p. 1330-1333. ISSN: 1022- 6680.
  Detail

  MAJER, Z. Micro- Crack Behaviour in Polymer Particulate Composite. In 17th International of PhD. students seminar. Žilina: EDIS, 2012. p. 41-45. ISBN: 978-80-554-0477- 6.
  Detail

  MAJER, Z. The Influence of Nonlinear Matrix on Mechanical Behavior of Polymer Particulate Composite. Advanced Materials Research, 2012, vol. 535- 537, no. 1, p. 23-26. ISSN: 1022- 6680.
  Detail

• 2011

  MARCIÁN, P.; MAJER, Z.; DLOUHÝ, I.; FLORIAN, Z. Trabecular local mechanical properties estimation of highly porous cellurar materials. Local Mechanical Properties 2011, Book of Abstracts. 1. Olomouc 2011: Palacký University, 2011. p. 49-49. ISBN: 978-80-244-2889- 5.
  Detail

  NÁHLÍK, L.; ZOUHAR, M.; ŠEVČÍK, M.; SEITL, S.; MAJER, Z. 13th Applied mechanics 2011 conference proceeding. 13th Applied mechanics 2011 conference proceeding. 2011. ISBN: 978-80-87434-03- 1.
  Detail

  MAJER, Z.; KNÉSL, Z.; HUTAŘ, P. Crack Behaviour in Polymeric Composites: The Influence of Particle Shape. Key Engineering Materials, 2011, vol. 465, no. 1, p. 564-567. ISSN: 1013- 9826.
  Detail

  MARCIÁN, P.; MAJER, Z.; ŘEHOŘEK, L.; FLORIAN, Z.; DLOUHÝ, I. Chapter 47: Estimation of the properties porous structures by experiment and modelling. In DAAAM International Scientific Book 2011. 10. Vienna: DAAAM International Vienna, 2011. p. 573-584. ISBN: 978-3-901509-84- 1.
  Detail

  HUTAŘ, P.; NÁHLÍK, L.; MAJER, Z.; KNÉSL, Z. The effect of an interphase on micro- crack behaviour in polymer composites. In Computational Modelling and Advanced Simulations. Computational Methods in Applied Sciences. Dordrecht: Springer, 2011. p. 83-97. ISBN: 978-94-007-0316- 2.
  Detail

  MAJER, Z. Numerical Modeling of Micro- crack Propagation in Composites. Inteligent Manufacturing and Automation: Focus on Young Researches and Scientists, 2011, vol. 22, no. 1, p. 707-708. ISSN: 1726- 9679.
  Detail

  MAJER, Z.; NOVOTNÁ, E. THE EFFECT OF VARIOUS NON- LINEAR MATRIX TYPES ON MECHANICAL PROPERTIES OF PARTICULATE COMPOSITE. Chemické listy, 2011, vol. 105, no. 17, p. 830-831. ISSN: 0009- 2770.
  Detail

• 2010

  MAJER, Z. The Estimation of the Young' s Modulus of the Composite for Different Types of Matrix. Inteligent Manufacturing and Automation: Focus on Young Researches and Scientists, 2010, vol. 21, no. 1, p. 1013-1014. ISSN: 1726- 9679.
  Detail

• 2009

  HUTAŘ, P.; MAJER, Z.; NÁHLÍK, L.; ŠESTÁKOVÁ, L.; KNÉSL, Z. THE INFLUENCE OF PARTICLE SIZE ON THE FRACTURE TOUGHNESS OF PP- BASED PARTICLE COMPOSITE. MECHANICS OF COMPOSITE MATERIALS, 2009, vol. 45, no. 3, p. 281-286. ISSN: 0191- 5665.
  Detail

• 2008

  NEZBEDOVÁ, E.; KNÉSL, Z.; HUTAŘ, P.; MAJER, Z.; VESELÝ, P. TOUGHNESS OF PP-BASED PARTICLE COMPOSITE: ROLE OF MICRO- CRACK PARTICLE INTERACTIONS. Properties, Processing, Modification, Application of Polymeric Materials. Halle/ Saale: 2008. p. A36 (A36 p.)ISBN: 978-3-940744-17- 3.
  Detail

  KNÉSL, Z.; HUTAŘ, P.; MAJER, Z.; NÁHLÍK, L. PARTICLE SHAPE EFFECT ON FRACTURE TOUGHNESS OF PP-BASED PARTICULATE COMPOSITE: ROLE OF THE INTERPHASE. Les Diablerets: Elsevier, 2008. p. 1 (1 s.).
  Detail

  HUTAŘ, P.; MAJER, Z.; ŠESTÁKOVÁ, L.; NÁHLÍK, L.; KNÉSL, Z. The influence of particle size on the fracture toughness of a PP- based particle composite. Riga, Latvia: Institute of Polymer Mechanics, University of Latvia, 2008. p. 112-112.
  Detail

  NEZBEDOVÁ, E.; FIEDLER, L.; MAJER, Z.; VLACH, B.; KNÉSL, Z. Fracture Toughness of Multi- layer Pipes. Strength of Materials, 2008, vol. 391, no. 1, p. 146-149. ISSN: 0556- 171X.
  Detail

  NEZBEDOVÁ, E.; KNÉSL, Z.; HUTAŘ, P.; MAJER, Z.; VESELÝ, P. Effect of Particles Size and Density on Fracture Toughness of Polypropylene Particulate Composite. In European Conference on Fracture, ECF17. Brno: 2008. p. 1576-1583. ISBN: 9781617823190.
  Detail

  MAJER, Z.; ŠESTÁKOVÁ, L.; NÁHLÍK, L.; HUTAŘ, P.; KNÉSL, Z. Numerical analysis of a crack approaching the interface of two dissimilar materials. Properties, Procesing, Modification, Application of Polymeric Materials. Halle/Saale, Germany: 2008. p. PI- 68 ( p.)ISBN: 978-3-940744-17- 3.
  Detail

  HUTAŘ, P.; MAJER, Z.; KNÉSL, Z.; NÁHLÍK, L.; ŠESTÁKOVÁ, L.; PROD'HOMME, G. Computational estimation of micro- crack behaviour in polypropylene copolymer. Barcelona, Spain (Venice, Italy): 2008. p. 1-2.
  Detail

  MAJER, Z.; HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. The influence of loading direction on micro- crack behaviour in polymer composite. Applied andComputational Mechanics, 2008, vol. 2, no. 2, p. 285-290. ISSN: 1802- 680X.
  Detail

• 2007

  MAJER, Z.; HUTAŘ, P.; NÁHLÍK, L. Chování trhlin v tenkých ochranných vrstvách. In SEMDOK 2007. Žilina- Súlov: EDIS, 2007. p. 84-87. ISBN: 978-80-8070-639- 5.
  Detail

  MAJER, Z.; HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. ESTIMATION OF CRITICAL VALUES FOR CRACK PROPAGATION FROM SHARP V- NOTCH. In Engineering Mechanics 2007, Book of Extended Abstracts. 1. Praha: Institute of Thermomechanics, Acade,y of Science of the Czech Republic, v. , v. , v., 2007. p. 167-168. ISBN: 978-80-87012-06- 2.
  Detail

  ŠESTÁKOVÁ, L.; MAJER, Z.; FIEDLER, L.; KNÉSL, Z. K- Calibration of Specimens used for Lifetime Estimation of Multilayer Pipes. In CD: 11.Problemseminar "Deformation und Bruchverhalten von Kunstoffen". Merseburg: 2007. p. poster 33 ( p.)
  Detail

  MAJER, Z.; HUTAŘ, P.; NÁHLÍK, J. INFLUENCE OF THE SINGULARITY INDUCED BY THE FREE SURFACE ON BEHAVIOUR OF THIN BODY WITH A V- NOTCH. In Applied Mechanics 2007 - Book of Extended Abstract. Ostrava: VŠB - Technical University of Ostrava, 2007. p. 155-156. ISBN: 978-80-248-1389- 9.
  Detail

  ŠESTÁKOVÁ, L.; MAJER, Z. Numerická analýza nehomogenních vzorků používaných pro měření lomově mechanických parametrů polyethylenu. In Křehký lom 2007. Brno: Ústav fyziky materiálů AV ČR, v. v. i., 2007. p. 145-156. ISBN: 978-80-254-0725- 7.
  Detail

  MAJER, Z.; HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. Influence of particles- matrix interphase on stress distribution in particulate composite with polymer matrix. Applied andComputational Mechanics, 2007, vol. 1, no. 1, p. 143-148. ISSN: 1802- 680X.
  Detail

• 2006

  MAJER, Z. Numerická analýza růstu povrchové trhliny v ochranných vrstvách. In PROBLÉMY LOMOVÉ MECHANIKY VI. Brno: CIDEAS, 2006. p. 51-58. ISBN: 80-214-3131- 8.
  Detail

  ŠESTÁKOVÁ, L., MAJER, Z., NÁHLÍK, L., KNÉSL, Z. Numerical Analysis of a Surface Crack in Protective Layers. In Engineering mechanics 2006. Svratka, CR: Institute of Theoretical and Applied Mechanics Academy of Sciences of the Czech Republic, Prague, 2006. p. 348-349. ISBN: 80-86246-27- 2.
  Detail

*) Publications are generated once a 24 hours.