Ing.

Milan Hnízdil

Ph.D.

FSI, LPTP – odborný asistent

+420 54114 3214
Milan.Hnizdil@vut.cz

Odeslat VUT zprávu

Ing. Milan Hnízdil, Ph.D.

Publikace

  • 2019

    HNÍZDIL, M.; CHABIČOVSKÝ, M. COOLING EFFICIENCY OF VARIOUS EMULSIONS DURING COLD ROLLING. Technical contribution to the 11 th International Rolling Conference, October 1st-3rd, Sao Paulo, SP, Brazil: 2019. s. 1-9.
    Detail

  • 2018

    HNÍZDIL, M.; CHABIČOVSKÝ, M. Experimental study of in-line heat treatment of 1.0577 structural steel. In 17th International Conference on Metal Forming (METAL FORMING 2018). Procedia Manufacturing. Elsevier, 2018. s. 1696-1603. ISBN: 9781510869561. ISSN: 2351-9789.
    Detail | WWW | Plný text v Digitální knihovně

    TUROŇ, R.; SQUERZI, M.; HNÍZDIL, M.; CHABIČOVSKÝ, M.; SIMEČEK, P.; KREISINGER, M. Development of the tube quenching prototype unit. Acta Metallurgica Slovaca, 2018, roč. 24, č. 3, s. 251-258. ISSN: 1335-1532.
    Detail | WWW

    POHANKA, M.; HNÍZDIL, M.; KOTRBÁČEK, P.; VOTAVOVÁ, H. Hydraulic descaling of wire coils during pickling program. 2018. s. 45-48.
    Detail

    LEE,T.W.; HNÍZDIL, M.; CHABIČOVSKÝ, M.; RAUDENSKÝ, M. Approximate Solution to the Spray Heat Transfer Problem at High Surface Temperatures and Liquid Mass Fluxes. HEAT TRANSFER ENGINEERING, 2018, roč. 0, č. 0, s. 1-7. ISSN: 1521-0537.
    Detail | WWW

  • 2017

    HNÍZDIL, M.; CHABIČOVSKÝ, M., Turoň, R.; Squerzi, M.; Šimeček, P.; Kreisinger, M. Development of the Tube Quenching Prototype Unit in Třinecké Železárny. 2017. s. 38-39.
    Detail | WWW

    HNÍZDIL, M.; KOTRBÁČEK, P. Heat treatment of rails. Materiali in tehnologije, 2017, roč. 51, č. 2, s. 329-332. ISSN: 1580-2949.
    Detail | WWW

  • 2016

    CHABIČOVSKÝ, M.; HORSKÝ, J.; RAUDENSKÝ, M.; HNÍZDIL, M.; KOTRBÁČEK, P. Design of quenching units for heat treatment of tubes. La Metallurgia Italiana, 2016, roč. 2016, č. 1, s. 23-28. ISSN: 0026-0843.
    Detail | WWW

    HORSKÝ, J.; HNÍZDIL, M.; CHABIČOVSKÝ, M.; KOTRBÁČEK, P. In- line heat treatment of flat products. In Proceedings European Conference on Heat Treatment 2016 and 3rd International Conference on Heat Treatment and Surface Engineering in Automotive Applications, 11 – 13 May 2016, Prague, Czech Republic. Čerčany: Asociace pro tepelné zpracování kovů, 2016. s. 1-8. ISBN: 978-80-904462-9- 8.
    Detail

    HNÍZDIL, M.; CHABIČOVSKÝ, M. Improvement of S355J2 Steel Mechanical Properties by Heat Treatment. 24th INTERNATIONAL CONFERENCE ON MATERIALSAND TECHNOLOGY. Ljubljana, Slovenia: Inštitut za kovinske materiale in tehnologije, 2016. s. 84-84. ISBN: 978-961-94088-0- 3.
    Detail

    HNÍZDIL, M.; CHABIČOVSKÝ, M.; RAUDENSKÝ, M., Lee, T- W. Heat Transfer during Spray Cooling of Flat Surfaces with Water at Large Reynolds Numbers. Journal of Flow Control, Measurement & Visualization, 2016, roč. 4, č. 3, s. 104-113. ISSN: 2329-3330.
    Detail | WWW

  • 2015

    CHABIČOVSKÝ, M.; HNÍZDIL, M.; TSENG, A.; RAUDENSKÝ, M. Effects of oxide layer on Leidenfrost temperature during spray cooling of steel at high temperatures. International journal of heat and mass transfer, 2015, č. 88, s. 236-246. ISSN: 0017-9310.
    Detail

    STRÁNSKÝ, M.; BROŽOVÁ, T.; RAUDENSKÝ, M.; HNÍZDIL, M.; TUROŇ, R. Effect of Various Spray Cooling Configurations on Hardness Profile of Tubes. In METAL 2015 24th International Conference on Metallurgy and Materials. 1. Ostrava: Tanger Ltd Ostrava, 2015. s. 1-6. ISBN: 978-80-87294-58- 1.
    Detail

    CHABIČOVSKÝ, M.; HORSKÝ, J.; RAUDENSKÝ, M.; HNÍZDIL, M.; KOTRBÁČEK, P. DESIGN OF QUENCHING UNITS FOR HEAT TREATMENT OF TUBES. In European conference on Heat treatment 2015 a 22nd IFHTSE congres. Miláno: Associazione Italiana di metallurgia, 2015. s. 1-9. ISBN: 978-88-98990-03- 0.
    Detail

    CHABIČOVSKÝ, M.; HORSKÝ, J.; HNÍZDIL, M.; STRÁNSKÝ, M. In- line tepelné zpracování ocelových profilů a trubek. Hutnické listy, 2015, roč. 68, č. 2, s. 14-19. ISSN: 0018-8069.
    Detail

    HNÍZDIL, M.; CHABIČOVSKÝ, M.; RAUDENSKÝ, M. Influence of the impact angle and pressure on the spray cooling of vertically moving hot steel surfaces. Materiali in tehnologije, 2015, roč. 49, č. 3, s. 333-336. ISSN: 1580-2949.
    Detail | WWW

  • 2014

    HORSKÝ, J.; CHABIČOVSKÝ, M.; HNÍZDIL, M.; STRÁNSKÝ, M.; KOTRBÁČEK, P. Chlazení trubek – první testy. 2014. s. 1-32.
    Detail

    HNÍZDIL, M.; CHABIČOVSKÝ, M.; RAUDENSKÝ, M.; MAGADOUX, E.; CODE, F. Spray Cooling Unit for Heat Treatment of Stainless Steel Sheets. Advanced Materials Research, 2014, roč. 936, č. 1, s. 1720-1724. ISSN: 1022-6680.
    Detail | WWW

  • 2013

    HNÍZDIL, M.; CHABIČOVSKÝ, M.; RAUDENSKÝ,M. Influence of impact angle and pressure on spray cooling of vertically moving hot steel surfaces. Program and book of abstracts, 21th Conference on Materials and Technology. Ljubljana, Slovenija: Institute of Metals and Technology, 2013. s. 85-85. ISBN: 978-961-92518-6- 7.
    Detail | WWW

  • 2012

    HNÍZDIL, M.; RAUDENSKÝ, M. Influence of Water Temperature on the Cooling Intensity during Continuous Casting and Hot Rolling. In 21ST INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2012). 1st Edition 2012. OSTRAVA: TANGER LTD, 2012. s. 1-6. ISBN: 978-80-87294-31- 4.
    Detail | WWW

    RAUDENSKÝ, M.; HNÍZDIL, M.; HWANG, J.; LEE, S.; KIM, S. Influence of Water Temperature on The Cooling Intensity of Mist Nozzles in Continuous Casting. Materiali in tehnologije, 2012, roč. 46, č. 3, s. 311-315. ISSN: 1580-2949.
    Detail

    RAUDENSKÝ, M.; HNÍZDIL, M.; KOTRBÁČEK, P. Why oxides intensify spray cooling?. The 30th International Steel Industry Conference in Paris. 1. Paris: 2012. s. 92-93.
    Detail

    CHABIČOVSKÝ, M.; RAUDENSKÝ, M.; HNÍZDIL, M. INFLUENCE OF WATER TEMPERATURE ON HEAT TRANSFER COEFFICIENT IN SPRAY COOLING OF STEEL SURFACES. In ENGINEERING MECHANICS 2012. Svratka: J. Náprstek, C. Fischer, 2012. s. 126-127. ISBN: 978-80-86246-39- 0.
    Detail | WWW

  • 2011

    RAUDENSKÝ, M.; HNÍZDIL, M.; LEE, S.; KIM, S.; HWANG, J. Influence of Water Temperature on Cooling Intensity of Mist Nozzles in Continuous Casting. In 19th Conference on Materials and Technology. Ljubljana 2011: 2011. s. 60-70. ISBN: 978-961-92518-4- 3.
    Detail

    HNÍZDIL, M.; RAUDENSKÝ, M. Descaling by Pulsating Water Jet. In METAL 2010, 19th International Conference on metallurgy and Materials. Rožnov pod Radhoštěm: Tanger spol. s r.o., 2011. s. 43-48. ISBN: 978-80-87294-17- 8.
    Detail

    RAUDENSKÝ, M.; POHANKA, M.; HNÍZDIL, M.; MARMONIER, F. COOLING SYSTEMS FOR CONTINOUS GALVANIZING LINE. In 20th Anniversary International Conference on Metallurgy and Materials - Metal 2011 - Conference Proceedings - Papers. 1. Brno: Tanger Ltd, 2011. s. 779-785. ISBN: 978-80-87294-24- 6.
    Detail

  • 2010

    RAUDENSKÝ, M.; HORSKÝ, J.; HNÍZDIL, M.; KOTRBÁČEK, P.; POHANKA, M. In- Line Heat Treatment and Hot Rolling. In International conference on advances in materials and processing technologies (AMPT2010). 1. 2010. s. 563-568. ISBN: 978-0-7354-0871- 5.
    Detail

    HNÍZDIL, M.; RAUDENSKÝ, M. Descaling by Pulsating Water Jet. In Sborník konference. Tanger s.r.o., 2010. s. 43-48. ISBN: 978-80-87294-15- 4.
    Detail

  • 2007

    HNÍZDIL, M.; BOHÁČEK, J. Obrazová analýza vodního proudu. In Engineering Mechanics 2007. Prague: Academy of Science of the Czech Republic, 2007. s. 79-80. ISBN: 978-80-87012-06- 2.
    Detail

*) Citace publikací se generují jednou za 24 hodin.