study programme

Cybernetics, Control and Measurements

Original title in Czech: Kybernetika, automatizace a měřeníFaculty: FEECAbbreviation: MPC-KAMAcad. year: 2021/2022

Type of study programme: Master's

Study programme code: N0714A150008

Degree awarded: Ing.

Language of instruction: Czech

Accreditation: 12.11.2019 - 12.11.2029

Profile of the programme

Academically oriented

Mode of study

Full-time study

Standard study length

2 years

Programme supervisor

Degree Programme Board

Fields of education

Area Topic Share [%]
Electrical Engineering Without thematic area 34
Cybernetics Without thematic area 66

Study aims

The follow-up master's degree program in Cybernetics, Automation and Measurement aims to provide graduates of the program with a deeper theoretical basis for the design, construction and application of measuring, control and automation systems. In addition to theoretical knowledge, emphasis is also placed on the ability to apply theoretical knowledge in practice.
During the study, the student can acquire deeper knowledge and skills through the study of selected compulsory elective subjects, eg in the field of measurement, automatic control, robotics, industrial control and communication systems, knowledge of machine learning principles or image processing, according to their choice.
Emphasis is also placed on the language preparation of students, especially on professional English and the ability of graduates to present and discuss professional topics in English.
The aim of the study is to prepare graduates who will apply in research, development, production, design, trade and services - wherever a wide range of modern methods and means of automation, applied informatics, machine learning and digital technology are applied.
Thanks to a systemic and comprehensive view of management issues, which is typical for graduates of "cybernetics", our graduates, after gaining practical experience, successfully apply in key management and managerial positions and in functions in which they apply a systems view, knowledge of systems analysis and optimal management.

Graduate profile

The study program Cybernetics, Automation and Measurement profiles the graduate for independent creative work and thinking based on a systemic view of technical and non-technical systems and the world as a whole. The graduate of the program will be able to use the acquired professional knowledge, skills and general and professional competencies to independently define and creatively solve a theoretical and practical problem.
Expertise:
Calculations of extrema of functions of several variables, double and triple integral, curve and area integral, including application use of these tools.
Basic orientation in the field of probability theory, mathematical statistics and selected methods from the theory of operations research, including the ability to apply these tools.
Ability of state and input-output description of dynamic systems, knowledge of control principles of deterministic and stochastic systems, stability analysis of selected types of systems.
Ability to discuss basic types of classification and optimization tasks of machine learning.
Ability to describe the components of microcontroller control systems, their typical peripherals, knowledge of the principles of operation of these peripherals, the ability to create software for microcontrollers.
Ability to interpret and discuss basic methods of data collection, analysis and processing, including the most important signal transformations and methods of time-frequency analysis, the ability to discuss the properties of methods and results of analyzes.
Professional skills:
Ability to analyze, describe and evaluate the stability of selected types of dynamic systems, the ability to assess the observability, reconstructability, controllability, and reachability of the system, the ability to design a suitable method of management, including the ability to discuss possible approaches to analysis and control design.
Ability to design a way to solve common types of classification or optimization problems and discuss the advantages and disadvantages of the chosen solution.
Ability to design or analyze a simple microcontroller system, including the selection of suitable components and subsequent design of peripheral operation.
Ability to collect, process and analyze signal data in the time, frequency, time-frequency domain or using orthogonal transformations, including interpretation of analysis results.
Ability to design an automated measuring system and justify your design.
Ability to explain terminology, principles and discuss the most common systems for measurement automation, ability to describe and evaluate uncertainties in the measuring system
Ability to explain the principles, advantages and disadvantages of automation systems according to ISA S88 and ISA95, the ability to discuss the issue of virtual commissioning of production systems.
Professional qualifications:
Ability to solve engineering tasks using the acquired knowledge and skills, design, discuss and make decisions aimed at fulfilling the assigned tasks in a specified time.
Ability to present one's own professional opinions in Czech and English.
Using already known theoretical knowledge, search for and expand their professional knowledge and apply this to the given problem.

The breadth and depth of knowledge of all graduates is verified by examinations in the compulsory subjects of the profiling basis, as well as by the final examination in the state examination.
Demonstrate skills and general competences related to the application of knowledge in practice during the study in the framework of compulsory laboratory exercises, individual or team projects. Knowledge, skills and ability to produce quality engineering works and the ability to present the achieved results are demonstrated mainly by the independent elaboration and defense of the diploma thesis.
Graduates are prepared to find employment in technical practice, in creative work, research and development, in production, in management and managerial positions in technical or commercial companies. Due to the breadth of professional knowledge that modern technologies and trends require for their mastery, graduates focus on one or more professional areas in the form of compulsory elective subjects according to their interest during their studies.

Profession characteristics


Graduates are mainly employed in:
- in the field of professional activity in production, design and trade organizations,
- in development and design teams,
- in academia and other institutions involved in science, research, development and innovation,
- in all areas of society where cybernetic systems or cybernetic principles are applied.
Graduates find employment mainly in the analysis, design, creation and management of measuring and control systems, in the programming, integration, support, maintenance and sale of these systems.

Study plan creation

The rules and conditions for creating study plans are given by BUT's internal regulations "BUT Study and Examination Regulations," BUT Study Programs Regulations "and the relevant BUT internal standards.
Study subjects are evaluated by credits according to ECTS. The credit expresses the approximate weekly hourly workload of the student during the study of the subject. Contact teaching is usually organized in two-hour or three-hour blocks. The lesson lasts 60 minutes, the last 10 minutes of each lesson block are scheduled as a break.
Credits for a given subject will be obtained by the student only after its prescribed completion, ie after granting credit, graded credit, or taking an exam under the conditions given by the Study and Examination Regulations of BUT, internal standard Rules for the organization of studies at FEEC and composition and content individually determined in each subject.

The number of courses included in the individual semesters of the MPC-KAM study plan corresponds to the study load given by the credit evaluation of these courses. In the two-year follow-up master's study MPC-KAM, the student must obtain at least 120 credits in the specified credit structure:

- 81 credits in compulsory subjects, the content of which defines the guaranteed profile of the graduate, which is verified by a state exam at the end of the study,
- a minimum of 29 credits in compulsory elective courses (PVB),
- at least 4 credits from English (PVB)
- at least 6 credits in elective courses.
Compulsory subjects are usually completed by the student in semesters and grades as specified in the study plans. If a student does not successfully complete a compulsory subject in the prescribed manner, he / she must re-enroll it immediately in the following year of his / her studies.
The student is obliged to successfully complete two English language courses during the study, for technical and organizational reasons these two courses are included as compulsory elective courses.
In the first semester of study, two basic theoretical subjects in the field of mathematics are included. The subject of the theoretical basis of the Selected Part of Mathematics (MPC-VPM) for Engineers is followed in the second semester by a group of compulsory elective courses (PVB), which contains two subjects of engineering physics. Both of these subjects are based on the mathematical apparatus from MPC-VPM. The subjects of the profiling basis, which expand and deepen the professional knowledge and skills acquired in the bachelor's study, are concentrated mainly in the first two semesters of study. The third semester of the study includes the last professional subject of the profiling basis (Process Automation) and also the compulsory subject Presentation Skills, which prepares students theoretically and practically for the presentation of professional knowledge in English. Students choose the topic of the diploma thesis at the beginning of the second year of study, work out the chosen topic during the third semester of study in the form of a semester work, where they usually analyze assignments, get acquainted with literature and suggest possible solutions. In the fourth semester of study, the dominant part of the study load is the realization of the diploma thesis. The scope and content of the subjects profiling the basis were determined so as to deepen the knowledge and skills acquired during the bachelor's study, deepen the theoretical understanding of the basic principles and provide a basis for professional compulsory elective subjects.

Compulsory elective courses (PVB) are professional subjects whose task is to expand and deepen students' professional knowledge. Compulsory elective courses for a given academic year are chosen by the student from the current offer of the study plan while respecting the rules for their selection specified in the FEEC BUT Information System. When choosing PV courses, the student respects the recommended prerequisites or co-requisites, if they are specified for the course in its study documentation. Recommendations for the choice of these subjects for the study of individual specializations are given in Annex 1 of the application.

Elective courses expand students' general knowledge. The student chooses the courses from the whole faculty offer (FEEC institutes) or from the offer of other faculties of BUT (so-called free courses) and can complete them in any year or semester of study. Optional subjects include the subject Physical Education.

Students choose optional subjects according to their professional interest using recommendations for individual specializations, taking into account the topic of their semester and diploma thesis and with regard to the recommendation to achieve an annual study load of at least 60 credits.
Students who start their studies in 2020/21 and later must, in order to successfully complete their studies, complete a compulsory or optional professional subject in English according to the study plan, see the BUT Guidelines "For the Teaching of Foreign Languages".

Availability for the disabled

All lecture rooms at the FEEC BUT allow disabled access; students, however, must meet the medical standards to acquire the necessary electrotechnical qualifications. In laboratory classes and practicals, students are required to independently operate measuring instruments and related equipment without endangering human health or damaging property.

What degree programme types may have preceded

The graduates may continue in a doctoral study programme.

Course structure diagram with ECTS credits

1. year of study, winter semester
AbbreviationTitleL.Cr.Com.Compl.Hr. rangeGr.Op.
MPC-PSOProbability, Statistics and Operations Researchcs5CompulsoryCr,ExP - 26 / CPP - 26yes
MPC-ZPDData Acquisition, Analysis and Processingcs6CompulsoryCr,ExP - 26 / Cp - 39yes
MPC-TDSTheory of Dynamic Systemscs7CompulsoryCr,ExP - 39 / COZ - 14 / Cp - 12yes
MPC-VPASelected Parts from Mathematics for Engineerscs5CompulsoryCr,ExP - 26 / COZ - 12 / CPP - 14yes
MPC-SABMachinery Safety for Industry Automation cs6Compulsory-optionalCr,ExP - 26 / L - 261yes
MPC-OSSOperating Sytems and Networkscs6Compulsory-optionalCr,ExP - 26 / Cp - 261no
MPC-OPROptimalization of Controllerscs6Compulsory-optionalCr,ExP - 26 / COZ - 261yes
MPC-SPSSpecial Sensorscs6Compulsory-optionalCr,ExP - 26 / L - 261yes
1. year of study, summer semester
AbbreviationTitleL.Cr.Com.Compl.Hr. rangeGr.Op.
MPC-EMSElectronic Measurement Systemscs7CompulsoryCr,ExP - 26 / L - 39yes
MPC-STUMachine Learningcs5CompulsoryCr,ExP - 26 / Cp - 26yes
MPC-POREmbedded Systems cs6CompulsoryCr,ExP - 26 / L - 39yes
MPC-FSYFuzzy Systemscs6Compulsory-optionalCr,ExP - 26 / Cp - 13 / PR - 131yes
MPC-KTACommunication Systems in Industrial Automationcs6Compulsory-optionalCr,ExP - 26 / COZ - 13 / L - 131yes
MPC-MTDMeasuring Techniques for Technical Diagnosticscs6Compulsory-optionalCr,ExP - 26 / L - 261yes
MPC-MEMElectromagnetic Field Modelingcs5Compulsory-optionalCr,ExP - 26 / Cp - 261yes
MPC-NM1Numerical Modeling 1cs5Compulsory-optionalExP - 13 / Cp - 391yes
MPC-RBTRoboticscs6Compulsory-optionalCr,ExP - 26 / L - 261no
MPC-RALRobust and Algebraic Controlcs6Compulsory-optionalCr,ExP - 26 / COZ - 261yes
MPC-TMETechnical Mechanicscs5Compulsory-optionalCr,ExP - 26 / COZ - 261yes
2. year of study, winter semester
AbbreviationTitleL.Cr.Com.Compl.Hr. rangeGr.Op.
MPC-AUPProcess Controlcs7CompulsoryCr,ExP - 26 / L - 39yes
MPC-PZDPresentation skillscs3CompulsoryGCrS - 26yes
MPC-SPKSemestral Thesiscs10CompulsoryGCrK - 26yes
MPC-MIDModelling and Identificationcs6Compulsory-optionalCr,ExP - 26 / Cp - 261yes
MPC-POVComputer Visioncs6Compulsory-optionalCr,ExP - 26 / L - 391yes
MPC-PMPAdvanced methods of programming PLCcs6Compulsory-optionalCr,ExP - 26 / L - 261yes
MPC-SDUDiscrete Event Systemscs6Compulsory-optionalCr,ExP - 26 / Cp - 261yes
2. year of study, summer semester
AbbreviationTitleL.Cr.Com.Compl.Hr. rangeGr.Op.
MPC-MSKDiploma Thesiscs20CompulsoryCrVD - 52yes
MPC-MROModern Industrial Roboticscs3Compulsory-optionalGCrP - 22 / L - 41yes
MPC-MAPAdvanced Methods for Mapping and Self-localization in Roboticscs3Compulsory-optionalGCrP - 14 / L - 121yes
MPC-ROZRecognitioncs6Compulsory-optionalCr,ExP - 26 / PR - 261yes
Any year of study, winter semester
AbbreviationTitleL.Cr.Com.Compl.Hr. rangeGr.Op.
MPC-EFE1English for Life 1cs2Compulsory-optionalCrCj - 261yes
MPC-EFE2English for Life 2cs2Compulsory-optionalCr,ExCj - 261yes
MPA-ESIEmbedded Systems for Industrial Controlen3Compulsory-optionalGCrP - 262yes
MPC-BKSCommunication System Securitycs6ElectiveCr,ExP - 26 / COZ - 26yes
XPC-CA1CISCO Academy 1 - CCNAcs3ElectiveExP - 26 / L - 52yes
XPC-CA3CISCO Academy 3 - CCNAcs3ElectiveExP - 26 / L - 52yes
XPC-CA5CISCO Academy 5 - CCNPcs3ElectiveExL - 52yes
MPC-FITHistory and Philosophy of Technologycs2ElectiveCrP - 26yes
XPC-MW1Microsoft Windows Desktop Systemscs5ElectiveExP - 26 / Cp - 26yes
XPC-EPLEPLAN - Designing in Electrical Engineeringcs4ElectiveGCrCp - 52yes
XPC-EPOProfessional Ethicscs2ElectiveCrP - 26yes
XPC-IPDEngineering Pedagogy and Didacticscs5ElectiveExP - 52yes
XPC-KATConversation through Hot Current Issuescs3ElectiveCr,ExCj - 26yes
XPC-KPTCulture of Speech and the Generation of Textscs5ElectiveCrP - 26 / COZ - 26yes
XPC-LADLaboratory Didacticscs0ElectiveCrP - 13yes
MPC-MAUBookkeeping for Managerscs2ElectiveCrP - 13 / COZ - 13yes
MPC-OPAPractical Trainingcs4ElectiveCrPX - 26yes
XPC-PEPPedagogical Psychologycs5ElectiveExP - 52yes
XPC-POMManagement Minimumcs4ElectiveCrP - 26 / COZ - 26yes
XPC-POUDouble-Entry Bookkeepingcs4ElectiveExP - 26 / COZ - 26yes
MPC-RP1Controlled Drives 1cs5ElectiveCr,ExP - 39 / Cp - 26yes
MPC-RETRhetoriccs2ElectiveCrP - 26yes
XPC-MW3Microsoft Windows Network Technologiescs5ElectiveExCp - 52no
MPC-UINArtificial Intelligencecs5ElectiveCr,ExP - 26 / Cp - 26yes
Any year of study, summer semester
AbbreviationTitleL.Cr.Com.Compl.Hr. rangeGr.Op.
MPC-EFE1English for Life 1cs2Compulsory-optionalCrCj - 261yes
MPC-EFE2English for Life 2cs2Compulsory-optionalCr,ExCj - 261yes
MPA-MTDMeasuring Techniques for Technical Diagnosticsen6Compulsory-optionalCr,ExP - 26 / L - 262no
MPA-PPMProperties and Production of Electrotechnic Materialsen3Compulsory-optionalGCrP - 262yes
MPA-RALRobust and algebraic controlen5Compulsory-optionalCr,ExP - 26 / COZ - 14 / Cp - 122yes
XPC-ELBSafety in Electrical Engineeringcs2ElectiveExP - 26yes
XPC-CASCISCO Academy - Network Securitycs3ElectiveExL - 52yes
XPC-CA2CISCO Academy 2 - CCNAcs3ElectiveExP - 26 / L - 52yes
XPC-CA4CISCO Academy 4 - CCNPcs3ElectiveExL - 52yes
MPC-CSIDigital Signals and Systemscs7ElectiveCr,ExP - 26 / COZ - 13 / Cp - 39yes
MPC-FITHistory and Philosophy of Technologycs2ElectiveCrP - 26yes
XPC-EICElectrical Installationscs5ElectiveGCrP - 26 / L - 20 / PR - 10yes
XPC-EPOProfessional Ethicscs2ElectiveCrP - 26yes
MPC-IAPInternet Applicationscs5ElectiveCr,ExP - 39 / PR - 13yes
XPC-IPDEngineering Pedagogy and Didacticscs5ElectiveExP - 52yes
XPC-KATConversation through Hot Current Issuescs3ElectiveCr,ExCj - 26yes
XPC-KPTCulture of Speech and the Generation of Textscs5ElectiveCrP - 26 / COZ - 26yes
XPC-LADLaboratory Didacticscs0ElectiveCrP - 13yes
MPC-MAUBookkeeping for Managerscs2ElectiveCrP - 13 / COZ - 13yes
MPC-NANNanotechnologycs5ElectiveCr,ExP - 26 / Cp - 6 / L - 7 / PR - 13yes
XPC-PEPPedagogical Psychologycs5ElectiveExP - 52yes
XPC-MW4Microsoft Enterprise Solutionscs5ElectiveExP - 26 / Cp - 26no
XPC-POUDouble-Entry Bookkeepingcs4ElectiveExP - 26 / COZ - 26yes
XPC-MW5Programming .NET and C#cs5ElectiveExP - 26 / Cp - 26yes
MPC-RETRhetoriccs2ElectiveCrP - 26yes
XPC-MW2Microsoft Windows Server Systemscs5ElectiveExP - 26 / Cp - 26yes
XPC-TPRTechnical Lawcs3ElectiveCrP - 39yes
All the groups of optional courses
Gr. Number of ECTS credits Courses
1 9 cr - 36 cr MPC-MID (6 cr), MPC-POV (6 cr), MPC-PMP (6 cr), MPC-SDU (6 cr), MPC-MRO (3 cr), MPC-MAP (3 cr), MPC-ROZ (6 cr)
1 5 cr - 99 cr MPC-MEM (5 cr), MPC-TME (5 cr)
1 12 cr - 99 cr MPC-SAB (6 cr), MPC-OSS (6 cr), MPC-OPR (6 cr), MPC-SPS (6 cr), MPC-FSY (6 cr), MPC-KTA (6 cr), MPC-MTD (6 cr), MPC-NM1 (5 cr), MPC-RBT (6 cr), MPC-RAL (6 cr)
1 4 cr - 8 cr MPC-EFE1 (2 cr) winter/summer sem., MPC-EFE2 (2 cr) winter/summer sem.
2 3 cr - 12 cr MPA-ESI (3 cr), MPA-MTD (6 cr), MPA-PPM (3 cr), MPA-RAL (5 cr)