This project was co-financed with state support of the CR Technological Agency as part of Centra kompetence
www.tacr.cz
Research useful for society.

Project detail

Centrum výzkumu povrchových úprav

Duration: 01.01.2014 — 31.12.2019

Funding resources

Technologická agentura ČR - Centra kompetence

- whole funder (2014-06-13 - 2019-12-31)

On the project

Projekt je zaměřen na oblast povrchových úprav pro strojírenství a stavitelství, zejména na výzkum a vývoj nových typů materiálů, technologií jejich aplikace a předúprav povrchů s vysokou úrovní know-how významně zlepšující jejich vlastnosti. Nové povlaky budou účinné a dosáhnou míru vlastností, splňující současné či budoucí environmentální požadavky. Projekt je zaměřen na komercializaci výsledků a jejich koordinaci s prioritami ČR. Témata jsou definovány v dlouhodobém horizontu.

Description in English
The project is focused on surface treatment area for mechanical/civil engineering,especially R&D of new types of materials,use,application of new techniques for surface treatment/pretreatment with high levels of know-how substantially improved functionality.New coatings will be effective and achieve tailored properties and will meet present or future environmental demands.It is aimed to commercialize the results and coordinate them with CR priorities. The topics are defined in long term horizon.

Keywords
organic coatings; paints with targeted properties; treatment and pretreatment of surfaces; application technologies; corrosion- machinery; civil engineering; aeronautics; power engineering

Key words in English
organic coatings; paints with targeted properties; treatment and pretreatment of surfaces; application technologies; corrosion- machinery; civil engineering; aeronautics; power engineering

Mark

TE02000011

Default language

Czech

People responsible

Čelko Ladislav, doc. Ing., Ph.D. - principal person responsible

Units

Advanced instrumentation and methods for material characterization
- (2015-01-01 - 2019-12-31)

Results

SLÁMEČKA, K.; JECH, D.; KLAKURKOVÁ, L.; TKACHENKO, S.; REMEŠOVÁ, M.; GEJDOŠ, P.; ČELKO, L. Thermal cycling damage in pre-oxidized plasma-sprayed MCrAlY plus YSZ thermal barrier coatings: Phenomenon of multiple parallel delamination of the TGO layer. Surface and Coatings Technology, 2020, vol. 384, no. 125328, p. 1-13. ISSN: 0257-8972.
Detail

JECH, D.; ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; HORYNOVÁ, M.; ŠVEJCAR, J. Formation of Thermally Sprayed Coatings on Grid-like Structure Substrate. Materials Structure & Micromechanics of Fracture. 1. Brno, Czech Republic: Brno University of Technology, 2016. p. 111-111. ISBN: 978-80-214-5357-9.
Detail

JECH, D.; ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; HORYNOVÁ, M.; ŠVEJCAR, J. Formation of Thermally Sprayed Coatings on Grid-like Structure Substrate. In Materials Structure & Micromechanics of Fracture VIII. Solid State Phenomena. Solid State Phenomena. Switzerland: Trans Tech Publications, 2017. p. 387-390. ISBN: 978-3-03835-626-4. ISSN: 1012-0394.
Detail

VODÁK, J.; NEČAS, D.; OHLÍDAL, M.; OHLÍDAL, I. Determination of local thickness values of non-uniform thin films by imaging spectroscopic reflectometer with enhanced spatial resolution. Measurement Science and Technology, 2017, vol. 28, no. 2, p. 025205 (025205-6 p.)ISSN: 0957-0233.
Detail

JECH, D.; ČELKO, L.; REMEŠOVÁ, M.; SLÁMEČKA, K.; CTIBOR, P. Influence of isothermal oxidation on microstructure of YSZ and Mullite-YSZ thermal barrier coatings. In MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE. Procedia Structural Integrity. Nizozemsko: Elsevier, 2020. p. 378-383. ISBN: 978-80-214-5760-7. ISSN: 2452-3216.
Detail

KOMAROV, P.; JECH, D.; ČELKO, L.; PIJÁKOVÁ, B.;Zhou, D.; Vaẞen, R. Influence of RF Plasma Jet Surface Treatment on Wetting Behavior of Yttria Stabilized Zirconia SPS Coatings. In Metallography & Fractography 2019. Defect and Diffusion Forum. Switzerland: Trans Tech Publications Ltd, 2020. p. 423-429. ISSN: 1662-9507.
Detail

PIJÁKOVÁ, B.; VORÁČ, Z.; RÁHEĹ, J.; ZIKMUND, T.; ČELKO, L.; KAISER, J.; ALBERTI, M. Effect of Ceramic Additives on Hydrophobic Layer Electrodeposition. In XII. Conference on Pigments and binders. Pardubice: Chemagazín, 2019. p. 127-131. ISBN: 978-80-906269-4-2.
Detail

SLÁMEČKA, K.; JECH, D.; KLAKURKOVÁ, L.; TKACHENKO, S.; REMEŠOVÁ, M.; GEJDOŠ, P.; ČELKO, L. Thermal cycling behaviour of plasma-sprayed thermal barrier coatings with pre-oxidized NiCrAlY and NiCoCrAlY bond-coats. In MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE. Procedia Structural Integrity. Nizozemsko: Elsevier, 2020. p. 439-444. ISBN: 978-80-214-5760-7. ISSN: 2452-3216.
Detail

ČELKO, L.; JECH, D.; TKACHENKO, S.; KOMAROV, P.; REMEŠOVÁ, M.; SLÁMEČKA, K.; CTIBOR, P. Failure of Gadolinium Zirconate and Yttria Stabilized Zirconia Thermal Barrier Coatings Subjected to High Temperature Calcia-Magnesia-Alumino-Sisicate Attack. In MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE. Procedia Structural Integrity. Nizozemsko: Elsevier, 2020. p. 360-365. ISBN: 978-80-214-5760-7. ISSN: 2452-3216.
Detail

ČELKO, L.; JECH, D.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; KAISER, J. Princip fukce tepelných bariér připravovaných žárovými nástřiky. Transfer, 2015, roč. 2015, č. 25, s. 42-45. ISSN: 1801-9315.
Detail

JECH, D.; ČELKO, L.; ZÁBRANSKÝ, K.; DOČEKALOVÁ, K.: GasShield; Inert gas shielding nozzle. CEITEC - Materials Characterization and Advanced Coatings detached workplace Hájecká 1194/12, 618 00, Brno. (prototyp)
Detail

ČELKO, L.; JECH, D.: CMAS-R01; Heat shield with CMAS resistant thermal barrier coating based on Gd2Zr2O7. laboratoře CEITEC, RG1-06. (funkční vzorek)
Detail

Link

http://www.isvav.cz/projectDetail.do;jsessionid=7724C9785B4A2B4708FFC65B8EEE274B?rowId=TE02000011

Responsibility: Čelko Ladislav, doc. Ing., Ph.D.