Detail publikace

DESIGN OF FAST MAGNETORHEOLOGICAL DAMPER USING SELECTIVE LASER MELTING TECHNOLOGY

VÍTEK, P. STRECKER, Z. ROUPEC, J.

Originální název

DESIGN OF FAST MAGNETORHEOLOGICAL DAMPER USING SELECTIVE LASER MELTING TECHNOLOGY

Typ

článek ve sborníku ve WoS nebo Scopus

Jazyk

angličtina

Originální abstrakt

Abstract: This paper examines a potential of structured magnetic circuits for a construction of piston of magnetorheological (MR) damper with short response time, great force range and good mechanical properties. Using complex structures designed according to the magnetic FEM simulation can almost eliminate eddy-currents (and thus response time), reduce the weight of magnetic circuit with only a small drop in magnetic flux in the magnetic circuit. Due to the complexity of shapes of structured magnetic circuits, selective laser melting (SLM) technology is currently considered as the only possible technology. A shape optimization with respect to SLM limitations is therefore proposed. As a material for the magnetic circuit, nearly pure Fe was chosen. This material has very good magnetic properties but the drawback is a very good electric conductivity, which causes large generation of eddy currents during rapid changes of magnetic field. Suggested structured magnetic circuit is compared to a solid magnetic circuit by means of magnetic simulations. Simulations showed that the structured geometry of magnetic circuits can effectively reduce its weight (the weight of bobbin was reduced by up to 45 % and the weight of outer cylinder was reduced by up to 13 %) while time response is reduced more than 18 times and inductance drop is less than 20 %.

Klíčová slova

MR damper, selective laser melting, structured geometry, time response

Autoři

VÍTEK, P.; STRECKER, Z.; ROUPEC, J.

Vydáno

14. 5. 2018

Nakladatel

Institute of theoretical and applied mechanics of the Czech academy of Sciences

Místo

Praha

ISBN

978-80-86246-88-8

Kniha

ENGINEERING MECHANICS 2018

Číslo edice

24

ISSN

1805-8256

Periodikum

Engineering Mechanics ....

Ročník

24

Číslo

1

Stát

Česká republika

Strany od

905

Strany do

908

Strany počet

4

URL

BibTex

@inproceedings{BUT151978,
  author="Petr {Vítek} and Zbyněk {Strecker} and Jakub {Roupec}",
  title="DESIGN OF FAST MAGNETORHEOLOGICAL DAMPER USING SELECTIVE LASER MELTING TECHNOLOGY",
  booktitle="ENGINEERING MECHANICS 2018",
  year="2018",
  journal="Engineering Mechanics ....",
  volume="24",
  number="1",
  pages="905--908",
  publisher="Institute of theoretical and applied mechanics of the Czech academy of Sciences",
  address="Praha",
  isbn="978-80-86246-88-8",
  issn="1805-8256",
  url="http://www.engmech.cz/improc/2018/905.pdf"
}