Detail publikace

Structural, magnetic, elastic, dielectric and electrical properties of hot-press sintered Co1-xZnxFe2O4 (x=0.0, 0.5) spinel ferrite nanoparticles

Originální název

Structural, magnetic, elastic, dielectric and electrical properties of hot-press sintered Co1-xZnxFe2O4 (x=0.0, 0.5) spinel ferrite nanoparticles

Anglický název

Structural, magnetic, elastic, dielectric and electrical properties of hot-press sintered Co1-xZnxFe2O4 (x=0.0, 0.5) spinel ferrite nanoparticles

Jazyk

en

Originální abstrakt

In this article, Co1-xZnxFe2O4(x = 0.0 and 0.5) disc-shaped pellets were formed by hot-press sintering of nanoparticles at temperature 925 degrees C for 10 min in vacuum atmosphere under 30 MPa mechanical pressure. X-ray diffraction study confirmed the formation of spinel cubic ferrite structure of hot-press sintered spinel ferrite Co1-xZnxFe2O4(x= 0.0 and 0.5) samples. The scanning electron microscopy image indicated that the growth and densification of smaller ferrite nanoparticles were higher than larger ferrite nanoparticles. Magnetic properties of sintered samples were investigated by the superconducting quantum interface device (SQUID) magnetometer at room temperature. The hot press sintered Co1-xZnxFe2O4(x = 0.0 and 0.5) pellet samples exhibited magnetic properties dependent on the grain size of spinel ferrite particles. The maximum saturation magnetization 82.47 emu/g was obtained for Co(0.5)Zn(0.5)Fe(2)O(4)hot press sintered sample of ball-milled ferrite particles. Further, the impact of grain size and density of sample on hardness, dielectric property and ac conductivity of hot-press sintered samples was investigated. In addition, the longitudinal wave velocity (V-l), transverse wave velocity (V-t), mean elastic wave velocity (V-m), bulk modulus (B), rigidity modulus (G), Young's modulus (E), Poisson ratio (sigma) and Debye temperature (theta(D)) were calculated. The elastic moduli of hot press sintered ferrite samples were corrected to zero porosity using Hosselman and Fulrath model.

Anglický abstrakt

In this article, Co1-xZnxFe2O4(x = 0.0 and 0.5) disc-shaped pellets were formed by hot-press sintering of nanoparticles at temperature 925 degrees C for 10 min in vacuum atmosphere under 30 MPa mechanical pressure. X-ray diffraction study confirmed the formation of spinel cubic ferrite structure of hot-press sintered spinel ferrite Co1-xZnxFe2O4(x= 0.0 and 0.5) samples. The scanning electron microscopy image indicated that the growth and densification of smaller ferrite nanoparticles were higher than larger ferrite nanoparticles. Magnetic properties of sintered samples were investigated by the superconducting quantum interface device (SQUID) magnetometer at room temperature. The hot press sintered Co1-xZnxFe2O4(x = 0.0 and 0.5) pellet samples exhibited magnetic properties dependent on the grain size of spinel ferrite particles. The maximum saturation magnetization 82.47 emu/g was obtained for Co(0.5)Zn(0.5)Fe(2)O(4)hot press sintered sample of ball-milled ferrite particles. Further, the impact of grain size and density of sample on hardness, dielectric property and ac conductivity of hot-press sintered samples was investigated. In addition, the longitudinal wave velocity (V-l), transverse wave velocity (V-t), mean elastic wave velocity (V-m), bulk modulus (B), rigidity modulus (G), Young's modulus (E), Poisson ratio (sigma) and Debye temperature (theta(D)) were calculated. The elastic moduli of hot press sintered ferrite samples were corrected to zero porosity using Hosselman and Fulrath model.

BibTex


@article{BUT141512,
  author="Raghvendra Singh {Yadav} and Ivo {Kuřitka} and Jaromír {Havlica} and Miroslav {Hnatko} and Alexander {Cigáň} and Jiří {Másilko} and Lukáš {Kalina} and Miroslava {Mončeková} and Jaroslav {Rusnak} and Vojtěch {Enev}",
  title="Structural, magnetic, elastic, dielectric and electrical properties of hot-press sintered Co1-xZnxFe2O4 (x=0.0, 0.5) spinel ferrite nanoparticles",
  annote="In this article, Co1-xZnxFe2O4(x = 0.0 and 0.5) disc-shaped pellets were formed by hot-press sintering of nanoparticles at temperature 925 degrees C for 10 min in vacuum atmosphere under 30 MPa mechanical pressure. X-ray diffraction study confirmed the formation of spinel cubic ferrite structure of hot-press sintered spinel ferrite Co1-xZnxFe2O4(x= 0.0 and 0.5) samples. The scanning electron microscopy image indicated that the growth and densification of smaller ferrite nanoparticles were higher than larger ferrite nanoparticles. Magnetic properties of sintered samples were investigated by the superconducting quantum interface device (SQUID) magnetometer at room temperature. The hot press sintered Co1-xZnxFe2O4(x = 0.0 and 0.5) pellet samples exhibited magnetic properties dependent on the grain size of spinel ferrite particles. The maximum saturation magnetization 82.47 emu/g was obtained for Co(0.5)Zn(0.5)Fe(2)O(4)hot press sintered sample of ball-milled ferrite particles. Further, the impact of grain size and density of sample on hardness, dielectric property and ac conductivity of hot-press sintered samples was investigated. In addition, the longitudinal wave velocity (V-l), transverse wave velocity (V-t), mean elastic wave velocity (V-m), bulk modulus (B), rigidity modulus (G), Young's modulus (E), Poisson ratio (sigma) and Debye temperature (theta(D)) were calculated. The elastic moduli of hot press sintered ferrite samples were corrected to zero porosity using Hosselman and Fulrath model.",
  address="ELSEVIER SCIENCE",
  chapter="141512",
  doi="10.1016/j.jmmm.2017.09.033",
  howpublished="online",
  institution="ELSEVIER SCIENCE",
  number="447",
  year="2018",
  month="february",
  pages="48--57",
  publisher="ELSEVIER SCIENCE",
  type="journal article in Web of Science"
}