Detail publikace

Zařízení pro programování digitální paměti v obvodu ASIC

Steffan P., Fujcik L., Prokop R., Magat M.

Originální název

Programming device for measuring ASIC

Český název

Zařízení pro programování digitální paměti v obvodu ASIC

Anglický název

Programming device for measuring ASIC

Typ

článek ve sborníku

Jazyk

en

Originální abstrakt

This paper focuses to deal with the design of an mixed signal ASIC single chip measurement system for (i) embedded digital sensing of TFT biosensors and (ii) system programming (hardware & software). This ASIC monolithic measurement system is embedded on thick film amperometric sensors. The sensor applies fused alumina substrate processed by thick film technology. The ASIC prototype prepared in CMOS 0.7 µm technol-ogy contains mixed signal analog measurement block and programmable digital calibration EPROM memory located on one chip. The digital part of the chip of the smart sensor contains 48 OTP (One Time Programma-ble) cells that are supposed to store calibration data for the precious measurement. The programmer is based on the ATMEL microcontroller. The full system is con-trolled by developed PC software. PC and programmer communicate with the biosensor with embedded ASIC chip via a USB interface.

Český abstrakt

Článek se zabývá návrhem programátoru pro digitální paměť integrovanou v obvodu ASIC. Tato paměť je složena ze 48 OTP (One Time Programmable) EEPROM paměťových buněk. Paměť slouží pro ukládání kalibračních a měřicích konstant. Základem programátoru je mikrokontrolér Atmel, který komunikuje s nadřazeným systémem přes USB port.

Anglický abstrakt

This paper focuses to deal with the design of an mixed signal ASIC single chip measurement system for (i) embedded digital sensing of TFT biosensors and (ii) system programming (hardware & software). This ASIC monolithic measurement system is embedded on thick film amperometric sensors. The sensor applies fused alumina substrate processed by thick film technology. The ASIC prototype prepared in CMOS 0.7 µm technol-ogy contains mixed signal analog measurement block and programmable digital calibration EPROM memory located on one chip. The digital part of the chip of the smart sensor contains 48 OTP (One Time Programma-ble) cells that are supposed to store calibration data for the precious measurement. The programmer is based on the ATMEL microcontroller. The full system is con-trolled by developed PC software. PC and programmer communicate with the biosensor with embedded ASIC chip via a USB interface.

Klíčová slova

Asic, programáor, kalibrační paměť

Rok RIV

2006

Vydáno

01.09.2006

Nakladatel

Ing. Zdeněk Novotný CSc., Brno

Místo

Brno

ISBN

80-214-3246-2

Kniha

EDS ´06 IMAPS CS International Conference Proceedings

Číslo edice

první

Strany od

331

Strany do

336

Strany počet

6

BibTex


@inproceedings{BUT24379,
  author="Pavel {Šteffan} and Lukáš {Fujcik} and Roman {Prokop} and Martin {Magát}",
  title="Programming device for measuring ASIC",
  annote="This paper focuses to deal with the design of an mixed signal ASIC single chip measurement system for (i) embedded digital sensing of TFT biosensors and (ii) system programming (hardware & software). This ASIC monolithic measurement system is embedded on thick film amperometric sensors. The sensor applies fused alumina substrate processed by thick film technology. The ASIC prototype prepared in CMOS 0.7 µm technol-ogy contains mixed signal analog measurement block and programmable digital calibration EPROM memory located on one chip. The digital part of the chip of the smart sensor contains 48 OTP (One Time Programma-ble) cells that are supposed to store calibration data for the precious measurement. The programmer is based on the ATMEL microcontroller. The full system is con-trolled by developed PC software. PC and programmer communicate with the biosensor with embedded ASIC chip via a USB interface.",
  address="Ing. Zdeněk Novotný CSc., Brno",
  booktitle="EDS ´06 IMAPS CS International Conference Proceedings",
  chapter="24379",
  institution="Ing. Zdeněk Novotný CSc., Brno",
  year="2006",
  month="september",
  pages="331",
  publisher="Ing. Zdeněk Novotný CSc., Brno",
  type="conference paper"
}