Branch Details

Power Electrical and Electronic Engineering

FEKTAbbreviation: PPA-SEEAcad. year: 2016/2017

Programme: Electrical Engineering and Communication

Length of Study: 4 years

Accredited from: 25.7.2007Accredited until: 31.12.2020

Profile

The goal of the postgradual doctoral (PhD) study is the education for scientific work in the area of power electrical engineering and power systems. Graduates of PhD find occupation either as scientific or research workers including industrial development, either as universty teachers and in higher manager functions as well

Key learning outcomes

PhD-graduate obtains high theoretical knowledge and will learn to solve complicated scientific and technological problems by oneself PhD-graduate is ready for further professional rise with a high degree of adaptivity Graduates of PhD find occupation either as scientific or research workers including industrial development, either as universty teachers and in higher manager functions as well

Occupational profiles of graduates with examples

The graduate obtains broad knowledge of subject of high power engineering. The knowledge is build mainly on theoretical background of the subject. Moreover the graduate will obtain deep special knowledge aimed in direction of his/her thesis. The graduate will be able to perform scientific and/or applied research based on up to date theoretical knowledge. The graduate will be able to organize and lead a team of researchers in the studied subject.

Guarantor

Issued topics of Doctoral Study Program

2. round (applications submitted from 04.07.2016 to 20.07.2016)

  1. Conducted disturbances in power systems in audio-frequency range

    Increasing deployment of power converters in distribution systems leads to rise in high-frequency conducted disturbance level related to the converters switching frequencies. The switching disturbances occur dominantly in frequency range from 2 kHz to 150 kHz. Current experience shows that such disturbance may lead to serious malfunction of grid-connected sensing, measuring and/or controlling systems of analog or digital nature. At the same time there is significant gap in EMC coordination and standardization since the frequency range was for a long time out of interest. It is just between low-frequency disturbances connected to power quality and radio-frequency disturbance. The project is focused firstly on development of suitable measuring apparatus and procedure to monitor the disturbances in distribution systems in the audio-frequency range. Then origin and propagation of the disturbance should be studied and finally EMC concept is expected to be proposed. The theme takes a part of research project in cooperation with Czech utilities and with foreign universities (Germany, Italy). Ask for more details at drapela@vutbr.cz.

    Tutor: Drápela Jiří, prof. Ing., Ph.D.

  2. DC Power Systems Voltage Quality

    With increasing number of DC power network related applications, necessity of the power/voltage quality assessment in those DC Power Systems can be expected. The aim of the work is to develop DC voltage quality indices starting from DC traction systems and AC public distribution systems voltage quality assessment practice. The theme takes a part of a research project in cooperation with K M B systems company. More information: drapela@feec.vutbr.cz.

    Tutor: Drápela Jiří, prof. Ing., Ph.D.

  3. Charging stations for electric vehicles as a stabilizing element of electricity system

    The urgent need for the development of charging stations for hybrid cars and electric vehicles (EV) still shows as important in the context of the current gradual development of this type of transport. The theme is focused on energy analysis of the concept of charging stations with integrated accumulation and renewable energy sources. Based on the concept will be developed the mathematical models. It will be performed energy-economic analysis in order to verify the possibility of using the concept in this way to reduce the load of the network at the connection point. Direct possibility of cooperation on concrete solution with an energy company is expected.

    Tutor: Mastný Petr, doc. Ing., Ph.D.

  4. Chromatic flicker perception modeling in flickermeters

    Visible light variation may leads to disturbance of human’s visual perception. The origin of such negative effect is in the eye anatomy and physiology. The major influence on the flickering light perception can be found in eye viewing field, photoreceptors (cones of three types and rods) and their distribution at retina as a part of eye anatomy and in eye adaptation mechanisms like pupil, photo-chemical and neural adaptation (response) to luminous variations (including the photoreceptors spectral luminous efficiency) as a part of eye physiology. The human eye can be seen as specialized luminance multi-detector where the stimulation contrast is as important as radiant density. There are differentiated three types of flicker: temporal, spatial and chromatic. All of these flickers are joyless and may involve many psychological interactions. In artificially illuminated areas, lamps light variations due to variations in supply voltage may also lead to flicker perception. Such lamp possibly will produce light with time-varying radiant flux and its spectral distribution. The lamps flickering is produced by a voltage Phase Modulation (PM), mainly by Phase Jumps (PJ) and by Interharmonic Voltages (IH) superimposed on a voltage waveform. Thesis is focused on the voltage fluctuation to lamps time-varying radiant flux and its spectral distribution fluctuation transfer analysis and on the utilization of the analysis results for development and realization of an objective flickermeter having response to both the temporal luminance and chromatic flicker. The thesis aim is the realization of the new flickermeter types implemented in LabVIEW, with the experimental verification. The thesis covers theoretical-analytical, developmental and also practical-experimental part of study. More information: drapela@feec.vutbr.cz.

    Tutor: Drápela Jiří, prof. Ing., Ph.D.

  5. Low-Frequency Electro-Magnetic Compatibility in Low- and Middle-Voltage Distribution Systems Highly Penetrated by Distributed Nonlinear, Dynamic and Parametric Loads

    Low-frequency EMC in LV/MV distribution systems highly penetrated by distributed nonlinear, dynamic and parametric loads.

    Tutor: Drápela Jiří, prof. Ing., Ph.D.

  6. Power system with electric energy accumulation

    Stability of electric power supply is - as a term - closely related with electrical energy production gained from renewable power sources (mainly from wind and photovoltaic power plants). The research will be focused on possibilities of accumulation of electric energy produced from renewable power sources with the help of modern technologies while focusing on hydrogen (VRB systems) utilization and pumped storage hydro plants for its accumulation. The result of the work will be the draft measures in the energy system, which can solve time disproportion between electrical energy supply and take-off from the renewable power sources. The solution is connected with computer simulation (Matlab) and experimental measuring on a real model.

    Tutor: Mastný Petr, doc. Ing., Ph.D.

  7. System for monitoring of power quality and energy power flows in buildings with renewable energy sources

    Evaluate current options (worldwide) management and monitoring of building energy systems with renewable energy sources. Design and create a unified system of regulation and control for the system, which will include heat pumps, solar thermal collectors and hybrid energy system with accumulation (photovoltaics, wind turbines) in order to achieve the maximum possible interactions between different sources and devices with respect to environmental influences. Underlying assumption of the proposed system is based on the concept of using PLC.

    Tutor: Mastný Petr, doc. Ing., Ph.D.

  8. The voltage regulation in distribution networks with a high proportion of stochastic sources

    An increasing proportion of stochastic resources in networks affect the voltage stability during the day. Variable power delivery to the grid from these sources causes fluctuations in voltage variations during the daily diagram. Current devices used to the voltage regulation are unable to provide the required voltage level at all points of the network. The aim is to describe new possibilities and means for voltage regulation in distribution system and design concept of this regulation with regard to the current development of the resource base.

    Tutor: Mastný Petr, doc. Ing., Ph.D.

  9. Utilization of advanced revenue meters for distribution systems control and automation

    The aim is to define expected functionalities of the revenue meters and their integration to individual security-technical layers of a distribution system management, furthermore to optimize metering features and data concentration for individual tasks.

    Tutor: Drápela Jiří, prof. Ing., Ph.D.

1. round (applications submitted from 01.04.2016 to 15.05.2016)

  1. The island DC network for objects with renewable energy sources

    Conceptual solution of an island DC networks where resource base consists of hybrid energy system (photovoltaic, wind turbine, accumulation). The goal is to propose a technical solution of energy system enabling in case of lack/excess energy cooperation with AC network and simultaneously ensure the safe power to the object. The solutions will be also the design and testing of control and monitoring algorithm.

    Tutor: Mastný Petr, doc. Ing., Ph.D.


Course structure diagram with ECTS credits

1. year of study, winter semester
AbbreviationTitleL.Cr.Com.Compl.Hr. rangeGr.Op.
DBM1AAdvanced methods of processing and analysis of imagesen4Optional specializedDrExS - 39yes
DTK2AApplied cryptographyen4Optional specializedDrExS - 39yes
DET1AElectrotechnical materials, material systems and production processesen4Optional specializedDrExS - 39yes
DFY1AJunctions and nanostructuresen4Optional specializedDrExS - 39yes
DEE1AMathematical Modelling of Electrical Power Systemsen4Optional specializedDrExS - 39yes
DME1AMicroelectronic Systemsen4Optional specializedDrExS - 39yes
DRE1AModern electronic circuit designen4Optional specializedDrExS - 39yes
DAM1ASelected chaps from automatic controlen4Optional specializedDrExS - 39yes
DVE1ASelected problems from power electronics and electrical drivesen4Optional specializedDrExS - 39yes
DTE1ASpecial Measuring Methodsen4Optional specializedDrExS - 39yes
DMA1AStatistics, Stochastic Processes, Operations Researchen4Optional specializedDrExS - 39yes
DJA6AEnglish for post-graduatescs4General knowledgeDrExCj - 26yes
1. year of study, summer semester
AbbreviationTitleL.Cr.Com.Compl.Hr. rangeGr.Op.
DMA2ADiscrete Processes in Electrical Engineeringen4Optional specializedDrExS - 39yes
DME2AMicroelectronic technologiesen4Optional specializedDrExS - 39yes
DRE2AModern digital wireless communicationen4Optional specializedDrExS - 39yes
DTK1AModern network technologiesen4Optional specializedDrExS - 39yes
DTE2ANumerical Computations with Partial Differential Equationsen4Optional specializedDrExS - 39yes
DET2ASelected diagnostic methods, reliability and qualityen4Optional specializedDrExS - 39yes
DAM2ASelected chaps from measuring techniquesen4Optional specializedDrExS - 39yes
DBM2ASelected problems of biomedical engineeringen4Optional specializedDrExS - 39yes
DEE2ASelected problems of electricity productionen4Optional specializedDrExS - 39yes
DFY2ASpectroscopic methods for non-destructive diagnostics en4Optional specializedDrExS - 39yes
DVE2ATopical Issues of Electrical Machines and Apparatusen4Optional specializedDrExS - 39yes
1. year of study, both semester
AbbreviationTitleL.Cr.Com.Compl.Hr. rangeGr.Op.
DQJAAEnglish for the state doctoral examcs4CompulsoryDrExyes