Branch Details

Fundamentals of Mechanical Engineering

Original title in Czech: Základy strojního inženýrstvíFSIAbbreviation: B-STIAcad. year: 2015/2016

Programme: Engineering

Length of Study: 3 years

Accredited from: Accredited until: 31.8.2022

Profile

The bachelor’s study programme “Mechanical Engineering” is intended as the most effective way to prepare students for the study in a follow-up master’s study programme. The graduates will have a wide professional basis enabling them to continue in some branch in a two-year follow-up master’s study programme specialised in mechanical engineering.

  • The graduates may choose any branch within a two-year follow-up master’s study programme (today approximately 20 branches).

  • Bachelor’s study graduates may immediately start their professional career; they may work as e.g. technicians in development, constructional, and technological institutes or enterprises, manufacturing plants, services and trade.

Key learning outcomes

Graduates will have gained fundamental engineering knowledge:

  • in general theoretical subjects (mathematics, geometry, physics, chemistry, etc.)
  • in subjects focusing on mechanical engineering (mechanics of rigid and deformable bodies , materials science, thermomechanics, hydromechanics, etc.)
  • in the area of mechanical engineering technologies (manufacturing, machining, etc.).
Such level of knowledge will enable the graduates its confident practical applications and to develop it further within design and applied engineering branches in the follow-up Master’s study.
Bachelor’s study also involves mastering a foreign language at an intermediate level.

Occupational profiles of graduates with examples

  • The graduates may continue their studies in a two-year follow-up master's study programme at the Faculty of Mechanical Engineering, at request and usually without entrance examinations.
  • They may choose any branch within a two-year follow-up master's study programme at the Faculty of Mechanical Engineering. Today they can choose from approximately 20 branches.
  • Graduates may also continue their studies in any follow-up master's study programme provided by other technical university.

Guarantor


Course structure diagram with ECTS credits

1. year of study, winter semester
AbbreviationTitleL.Cr.Com.Compl.Hr. rangeGr.Op.
A3English 3en0Compulsory-optionalCrCj - 26 / Cj - 26 / CPP - 13 / CPP - 13Englishyes
A5English 5en0Compulsory-optionalCrCj - 26 / Cj - 26Englishyes
3CD-ACADen2Compulsory-optionalCrCPP - 263CDyes
3CDCADcs2Compulsory-optionalCrCPP - 263CDyes
1CH-AChemistryen3Compulsory-optionalExP - 261CHno
1CHChemistrycs3Compulsory-optionalExP - 261CHyes
1IN-AComputer Scienceen5Compulsory-optionalGCrP - 26 / CPP - 261INyes
1INComputer Sciencecs5Compulsory-optionalGCrP - 26 / CPP - 261INyes
1K-AMachine Design Fundamentalsen4Compulsory-optionalCr,ExP - 13 / CPP - 261Kyes
1KMachine Design Fundamentalscs4Compulsory-optionalCr,ExP - 13 / CPP - 261Kyes
1M-AMathematics Ien9Compulsory-optionalCr,ExP - 52 / C1 - 44 / CPP - 81Myes
1MMathematics Ics9Compulsory-optionalCr,ExP - 52 / C1 - 44 / CPP - 81Myes
1PGComputer Geometry and Graphicscs5Compulsory-optionalCr,ExP - 26 / CPP - 261PGyes
1PG-AComputer Geometry and Graphicsen5Compulsory-optionalCr,ExP - 26 / CPP - 261PGyes
0KDSelected Chapters from Descriptive Geometrycs0Elective (voluntary)CrP - 26yes
0ZKSelected Chapters from Fundamentals of Designcs0Elective (voluntary)CrP - 26yes
0KMSelected Chapters from Mathematicscs0Elective (voluntary)CrP - 26yes
YDFFundamentals of Designcs0Elective (voluntary)CrP - 13 / C2b - 26yes
YKAFundamentals of Drawingcs0Elective (voluntary)CrC2b - 39yes
1. year of study, summer semester
AbbreviationTitleL.Cr.Com.Compl.Hr. rangeGr.Op.
2IVInformation Knowledge - Information Literacycs1CompulsoryCrCPP - 13yes
A4English 4en0Compulsory-optionalCrCj - 26 / Cj - 26 / CPP - 13 / CPP - 13Englishyes
A6English 6en0Compulsory-optionalCrCj - 26 / Cj - 26Englishyes
2KMachine Designcs3Compulsory-optionalGCrCPP - 262Kyes
2K-AMachine Designen3Compulsory-optionalGCrCPP - 262Kyes
2FPhysics Ics7Compulsory-optionalCr,ExP - 39 / C1 - 26 / C2b - 132Fyes
2F-APhysics Ien7Compulsory-optionalCr,ExP - 39 / C1 - 26 / C2b - 132Fyes
2M-AMathematics IIen8Compulsory-optionalCr,ExP - 39 / C1 - 44 / CPP - 82Myes
2MMathematics IIcs8Compulsory-optionalCr,ExP - 39 / C1 - 44 / CPP - 82Myes
2NUNumerical Methodscs4Compulsory-optionalCr,ExP - 13 / CPP - 262NUyes
2NU-ANumerical Methodsen4Compulsory-optionalCr,ExP - 13 / CPP - 262NUyes
2VTManufacturing Technology Ics3Compulsory-optionalGCrC2b - 262VTyes
2VT-AManufacturing Technology Ien3Compulsory-optionalGCrC2b - 262VTyes
BUMIntroduction to Material Science and Engineeringcs6Compulsory-optionalCr,ExP - 39 / C2b - 26BUMyes
BUM-AIntroduction to Material Science and Engineeringen6Compulsory-optionalCr,ExP - 39 / C2b - 26BUMyes
0MIPractical Materials Engineering on Industrial Artefactscs0Elective (voluntary)CrP - 8 / C1 - 3 / C2b - 12yes
0KFSelected Topics in Physics Ics0Elective (voluntary)CrP - 26yes
0UMMaterials Engineering - Selected Topicscs0Elective (voluntary)CrP - 26yes
0VPSelected Chapters from Programmingcs0Elective (voluntary)CrCPP - 26yes
2. year of study, winter semester
AbbreviationTitleL.Cr.Com.Compl.Hr. rangeGr.Op.
3FPhysics IIcs8CompulsoryCr,ExP - 39 / C1 - 26 / C2b - 26yes
3MMathematics IIIcs8CompulsoryCr,ExP - 39 / C1 - 39 / CPP - 13yes
3STStaticscs5CompulsoryCr,ExP - 26 / C1 - 12 / CPP - 14yes
3SVStructure and Properties of Materialscs5CompulsoryCr,ExP - 26 / C2b - 26yes
3VTProduction Technology IIcs2CompulsoryGCrC2b - 26yes
A3English 3en0Compulsory-optionalCrCj - 26 / Cj - 26 / CPP - 13 / CPP - 13Englishyes
A5English 5en0Compulsory-optionalCrCj - 26 / Cj - 26Englishyes
0AAApplied Algebra for Engineerscs0Elective (voluntary)CrP - 26no
0ZPAventics Pneumobil Racingcs3Elective (voluntary)GCrC2b - 26 / C2b - 26yes
0HZBarrel Guns cs2Elective (voluntary)GCrP - 26 / C1 - 13yes
0SVEngineering Materials - Selected Topicscs0Elective (voluntary)CrP - 26yes
0FKSelected Topics in Physics IIcs0Elective (voluntary)CrP - 26yes
2. year of study, summer semester
AbbreviationTitleL.Cr.Com.Compl.Hr. rangeGr.Op.
6AAAutomationcs5CompulsoryCr,ExP - 26 / CPP - 22 / C2b - 4yes
4KIKinematicscs5CompulsoryCr,ExP - 26 / C1 - 12 / CPP - 14yes
4KCDesign and CADcs2CompulsoryGCrCPP - 26yes
4MMathematics IVcs5CompulsoryCr,ExP - 26 / C1 - 26yes
3NUNumerical Methods IIcs2CompulsoryGCrCPP - 26yes
DTBMachining Technologycs6CompulsoryCr,ExP - 39 / C2b - 39yes
A4English 4en0Compulsory-optionalCrCj - 26 / Cj - 26 / CPP - 13 / CPP - 13Englishyes
A6English 6en0Compulsory-optionalCrCj - 26 / Cj - 26Englishyes
4PPStrength of Materials Ics7Compulsory-optionalCr,ExP - 52 / C1 - 12 / CPP - 14strenght and stressyes
4PP-AStrength of Materials Ien7Compulsory-optionalCr,ExP - 52 / C1 - 12 / CPP - 14strenght and stressyes
0MVCalculus with MAPLEcs0Elective (voluntary)CrCPP - 26yes
0MSMathematical Softwarecs0Elective (voluntary)CrCPP - 26yes
0EKUp-to-date Energy Systems and Bachelor's Thesescs0Elective (voluntary)CrP - 26yes
0PFComputer Physicscs0Elective (voluntary)CrCPP - 26yes
DPTProgramming Techniquescs0Elective (voluntary)CrP - 26 / CPP - 26yes
0SSStatistical Softwarecs0Elective (voluntary)CrCPP - 26yes
0PPSelected Topics in Strength of Materialscs0Elective (voluntary)CrP - 26yes
3. year of study, winter semester
AbbreviationTitleL.Cr.Com.Compl.Hr. rangeGr.Op.
5DTDynamicscs5CompulsoryCr,ExP - 26 / C1 - 12 / CPP - 14yes
5TETechnology IIcs4CompulsoryCr,ExP - 26 / C2b - 26yes
6TTThermomechanicscs6CompulsoryCr,ExP - 39 / C1 - 26yes
5FMMaterials Physicscs5Compulsory-optionalCr,ExP - 39 / C2b - 261yes
5PPStrength of Materials IIcs5Compulsory-optionalCr,ExP - 39 / C1 - 14 / CPP - 121yes
5PP-AStrength of Materials IIen5Compulsory-optionalCr,ExP - 39 / C1 - 14 / CPP - 121yes
6MSLimit States of Materials and Structurescs4Compulsory-optionalCr,ExP - 26 / C2b - 262yes
6SRConstruction of Production Machines and Robotscs4Compulsory-optionalGCrP - 26 / C2b - 262yes
6SMEngineering Metrology Ics4Compulsory-optionalCr,ExP - 26 / C2b - 262yes
5KS-AMachine Design - Machine Elementsen5Compulsory-optionalCr,ExP - 39 / CPP - 263yes
5KSMachine Design - Machine Elementscs5Compulsory-optionalCr,ExP - 39 / CPP - 263yes
EACApplication of CAD/CAM in Machining Technology Ics4Elective (voluntary)Cr,ExP - 26 / CPP - 26yes
0ZPAventics Pneumobil Racingcs3Elective (voluntary)GCrC2b - 26 / C2b - 26yes
0PEPractical Energeticscs2Elective (voluntary)CrC1 - 39yes
0PMPractical Metallographycs0Elective (voluntary)CrP - 13 / C2b - 26yes
0ATSeminar of Applied Thermomechanicscs0Elective (voluntary)CrCPP - 26yes
3. year of study, summer semester
AbbreviationTitleL.Cr.Com.Compl.Hr. rangeGr.Op.
6BBachelor Projectcs6CompulsoryCrVB - 78yes
6EEElectrical Engineering and Electronicscs5CompulsoryCr,ExP - 39 / C2b - 26yes
5HYHydromechanicscs6CompulsoryCr,ExP - 39 / C1 - 18 / CPP - 8yes
6KMMachine Design - Mechanisms, 3D Print and Solidworkscs4Compulsory-optionalGCrP - 26 / CPP - 18 / C2b - 84yes
6KPFinite Element Method and ANSYS Computational Codecs4Compulsory-optionalGCrP - 26 / CPP - 264yes
6T3Technology IIIcs4Compulsory-optionalGCrP - 26 / C2b - 264yes
6KTMachine Design - Mechanical Drivescs4Compulsory-optionalCr,ExP - 26 / CPP - 265yes
6KT-AMachine Design - Mechanical Drivesen4Compulsory-optionalCr,ExP - 26 / CPP - 265yes
FACApplication of CAD/CAM in Machining Technology IIcs3Elective (voluntary)GCrP - 26 / CPP - 26yes
0KTAir Conditioning and Heat Pumpscs0Elective (voluntary)CrC1 - 26yes
FLEAircraftcs3Elective (voluntary)GCrP - 26 / C1 - 13yes
PSTStatistical Methods in Engineeringcs4Elective (voluntary)Cr,ExP - 26 / CPP - 13yes
3. year of study, both semester
AbbreviationTitleL.Cr.Com.Compl.Hr. rangeGr.Op.
5AZEnglish - Basic Examen6Compulsory-optionalExZ - 1Englishyes
7AZEnglish - Exam B1en6Compulsory-optionalExZ - 1Englishyes
All the groups of optional courses
Gr. Number of courses Courses
English 1 A3, A5
1 1 5FM, 5PP, 5PP-A
4 1 6KM, 6KP, 6T3
English 1 A4, A6
English 1 A3, A5
English 1 A4, A6
2K 1 2K, 2K-A
2 1 6MS, 6SR, 6SM
English 1 5AZ, 7AZ
3CD 1 3CD-A, 3CD
strenght and stress 1 4PP, 4PP-A
5 1 6KT, 6KT-A
3 1 5KS-A, 5KS
2F 1 2F, 2F-A
1CH 1 1CH-A, 1CH
1IN 1 1IN-A, 1IN
2M 1 2M-A, 2M
1K 1 1K-A, 1K
2NU 1 2NU, 2NU-A
2VT 1 2VT, 2VT-A
1M 1 1M-A, 1M
1PG 1 1PG, 1PG-A
BUM 1 BUM, BUM-A