1. Introduction, preparation of raw materials mixture, laboratory procedure.
2. Determination of clay granulometry - sedimentation method (method according to Andreasen), hydrometer method according to Cassagrande, sieve analysis.
3. Shaping with casting slip (determination of the rate of ceramic body formation with optimally deflocculated casting slip), deflocculation of casting slips (determination of the optimal content of deflocculant in the casting slip, determination of the efficacy of different deflocculants).
4. Shaping from clay plastic body (determination of optimum water content according to Pfefferkorn, indentation method for determining the plasticity of plastic body - determination of regression dependence between Pfefferkorn and indentation methods). Production of test samples from the plastic body (brick body).
5. Pressing from dry pressing granulate. Determination of optimum pressing moisture. Effect of press chemicals for density of green body. Production of test specimens prepared by dry pressing.
6. Determination of sensitivity to drying. Indirect method of drying sensitivity by Bigot method (critical point and the area of safe and unsafe drying, the suitability of clays according to CSB). The direct method of drying sensitivity (with a maximum speed comparison harmless drying).
7. Hand shaping of ceramics. Introduction to the work of the potter's wheel, glaze preparation. Production of hand made samples from plastic body (Art Pottery).
8. Excursions (production of refractory ceramics, brick production) - production of building ceramics
9. Determibation of the properties of fired brick body depending on firing temperature: appearance and shape, color, firing shrinkage and total shrinkage; determination of compressive strength and flexural strength,
10. Determination of water absorption (by boiling), density (hydrostatic weighing), apparent porosity, apparent density and capillarity of fired brick bodies (task 4) depending on the firing temperature. Determination of capillary action of the body and indirect assessment of its Impermeability.
11. Properties of fired test samples prepared from the dry pressing granulate (task 5) according to EN 14411 (flexural strength, vacuum water absorption, apparent porosity, apparent density, frost resistance, microstructure of the body - optical microscope) - comparison of features with the requirements of dry pressed ceramic tiles.
12. Virtual field trip to the plants in the production of building ceramics - photos showing a short film footage of building ceramics production technology.
13. Inspection of results and reports, summary of the achievements, credit.