Course detail

Construction documents examination

FAST-CW02Acad. year: 2019/2020

Activities related with the construction and their inspection by the production company staff, construction supervisor and accredited laboratories. Photo and film documentation of construction by using internet - Parc.cz system, into the system also the photo of the initial condition can be inserted, construction management from the point of view of quality and occupational safety regulations.

Language of instruction

Czech

Number of ECTS credits

4

Guarantor

Ing. Martin Mohapl, Ph.D.

Department

Institute of Technology, Mechanisation and Construction Management (TST)

Learning outcomes of the course unit

By mastering the course the students will acquire basic knowledge of technology procedures implemented on a selected site that they will visit regularly. They will document the implemented technologies by photos or camera recordings. At the semester end the students will produce a CD and write commentary to the course of the selected operations procedures.

Prerequisites

Required is the knowledge of technological processes of construction work and basic knowledge in the implementation process works. As well required is knowledge of the theoretical principles of technological processes (technological continuity, technological breaks etc.)

Co-requisites

Not applicable.

Planned learning activities and teaching methods

Not applicable.

Assesment methods and criteria linked to learning outcomes

Not applicable.

Course curriculum

1. Photo documentation before the start of construction, periodic photographing of units from the agreed places, air photos and film recording, film recording of important technology activities, time sampling recording of the construction by digital camera installed on site, creation of an archive CD disc with documentation. DVD creation with video documents and inserting of documents.
2. Design planning documents and their completion for working drawings, insulation details, details of opening fills, roof and attic.
3. Proposals for technology procedures of main and demanding activities and new unknown procedures, earth works, walling plasterboard structures, padding warm, plastering.
4. Builders log keeping, construction preparation, inspection plan in Contec system and Book of in-process inspections, health safety and protection project.
5. Geotechnical categories for various structure types, types of geological surveys, soil borings, drills, suitability of the base soil, environmental impacts, resistance of structures against deformations, impact of the new structure on the surrounding buildings. Life time, material protection.
6. Properties of the base soil, separation capability, soil classification, consistency, rock strength, site supervision, monitoring and maintenance, evaluation of geotechnical information, natural slope of free bulk rocks, bulking, absorption capacity.
7. Embankments, drainage, improving and stiffening of base soil, basic requirements, inspection and manners of the compacting extent, depositing and compacting procedure, compacting experiment, general requirements for the inspection within the site supervision.
8. Building foundation, types of humidity, insulations, suitable formwork, inspection of foundation construction, manners of concrete pouring, using a pump, feeder pipe, crane, establishment of dump areas and site roads.
9. Bearing and peripheral structures, ceramic, sandwich, timber constructions, special materials, application of IZO - beams.
10. Establishment of structures of gyps, attic partitions, opening fills, installation of roof windows, correct application and positioning of the diffusion foil and vapour barrier – use of producer CD and discussion on the details.
11. Performing and assembly of ceiling structures, monolithic and semi-products, inspection junctions during realization, lifting mechanisms, crane ways, building lifts
12. Performing of contact thermal insulations, external and indoor plasters, inspection manner, correct performance, prescription of inspection markings on site.
13. Performing of residential and industrial floors, procedural principles, inspection manner before laying of the final layer.

Work placements

Not applicable.

Aims

Making the student acquainted with technology processes, application of elaborated technology processes at regular inspection of individual constructions in the construction process. On a selected construction regular video records are taken for individual technology procedures and photo documentation is made on the course of construction. At the end the students prepare a CD with comments based on the obtained documentation on the construction course.

Specification of controlled education, way of implementation and compensation for absences

Extent and forms are specified by guarantor’s regulation updated for every academic year.

Recommended optional programme components

Not applicable.

Prerequisites and corequisites

Not applicable.

Basic literature

Musil F., Tuza K.,: Stavebně technologické projektování hrubé stavby. Ateliérová tvorba, VUT Brno, 1992. (CS)
Vlček K.: Stavebně technologická příprava staveb. Jaga Group, Bratislava, 1998.
Cihlářský svaz Čech a Moravy: Cihlářský lexikon. 2001. (CS)
Juríček I.: Technológia pozemných stavieb - hrubá stavba. Jaga Group, Bratislava, 2001. (CS)
Blaich J.: Poruchy staveb. Jaga Group, Bratislava, 2001. (CS)

Recommended reading

Platné technické normy. 0.

Type of course unit

 

Lecture

26 hours, optionally

Teacher / Lecturer

Ing. Martin Mohapl, Ph.D.

Syllabus

1. Photo documentation before the start of construction, periodic photographing of units from the agreed places, air photos and film recording, film recording of important technology activities, time sampling recording of the construction by digital camera installed on site, creation of an archive CD disc with documentation. DVD creation with video documents and inserting of documents. 2. Design planning documents and their completion for working drawings, insulation details, details of opening fills, roof and attic. 3. Proposals for technology procedures of main and demanding activities and new unknown procedures, earth works, walling plasterboard structures, padding warm, plastering. 4. Builders log keeping, construction preparation, inspection plan in Contec system and Book of in-process inspections, health safety and protection project. 5. Geotechnical categories for various structure types, types of geological surveys, soil borings, drills, suitability of the base soil, environmental impacts, resistance of structures against deformations, impact of the new structure on the surrounding buildings. Life time, material protection. 6. Properties of the base soil, separation capability, soil classification, consistency, rock strength, site supervision, monitoring and maintenance, evaluation of geotechnical information, natural slope of free bulk rocks, bulking, absorption capacity. 7. Embankments, drainage, improving and stiffening of base soil, basic requirements, inspection and manners of the compacting extent, depositing and compacting procedure, compacting experiment, general requirements for the inspection within the site supervision. 8. Building foundation, types of humidity, insulations, suitable formwork, inspection of foundation construction, manners of concrete pouring, using a pump, feeder pipe, crane, establishment of dump areas and site roads. 9. Bearing and peripheral structures, ceramic, sandwich, timber constructions, special materials, application of IZO - beams. 10. Establishment of structures of gyps, attic partitions, opening fills, installation of roof windows, correct application and positioning of the diffusion foil and vapour barrier – use of producer CD and discussion on the details. 11. Performing and assembly of ceiling structures, monolithic and semi-products, inspection junctions during realization, lifting mechanisms, crane ways, building lifts 12. Performing of contact thermal insulations, external and indoor plasters, inspection manner, correct performance, prescription of inspection markings on site. 13. Performing of residential and industrial floors, procedural principles, inspection manner before laying of the final layer.

Exercise

13 hours, compulsory

Teacher / Lecturer

Ing. Martin Mohapl, Ph.D.

Syllabus

Week No.1 Introduction to the program, training, safety Week No.2 Determination of the actual measurements and deviations made structures Week No.3 Presentation of measuring devices ALMEMO (temperature, humidity, CO2, wind speed) Week No.4 Presentation of termovision camera, application IN SITU Week No.5 Flatness measurement of surfaces (tiles, floor tiles and plaster). Week No.6 Searching structural elements under the surface and endoscopic exploration. Week No.7 Measurement of cracks in load-bearing structure Week No.8 Determining the properties of materials and plasters Week No.9 Measurement method Blower Door Week No.10 Testing fresh concrete mix IN SITU Week No.11 Determination of hardness of the concrete in situ Week No.12 Test soil bearing capacity (light dynamic test) Week No.13 Credit