Electrical Power Distribution
FEKT-BPC-DEEAcad. year: 2019/2020
Essential problems of power distribution. Methods of solution of the steady states of distribution networks. Identification of characteristic values of short circuits for both symmetrical and asymmetrical failures.
Learning outcomes of the course unit
The students get the basic facts about power distribution.
The students pass out the course are able to:
- describe basic division of power system and their separate parts
- list and describe fundamental parameters of the power network elements and enumeration of basic dependencies of these parameters
- give details of aspect of power network design and verification
- calculate the power network steady state on low and middle voltage levels and current and voltage conditions on the ultra high voltage lines
- design cross-section of line or limited power network based on power losses or voltage drop
- explain principles of parallel and serial compensations
- named type of short-circuits for symmetrical and nonsymmetrical failures
- calculate characteristic values of short circuit current for specified point in power network
- expertly estimate the value ranges of the basic calculated quantity
The subject knowledge on the secondary school level is required, mainly ability to operate with goniometrical functions, complex numbers, understanding in area of The circuit theory with focus on steady state of circuit and three-phase systems. The successful completion of courses BPC-MA1B, BPC-VMP, BPC-MA2, BPC-FYZ1A, BPC-FYZ2, BPC-EL1 and BPC-EL2 are also required.
Recommended optional programme components
Recommended or required reading
HODINKA, M., FECKO, Š., NĚMEČEK, F.: Přenos a rozvod elektrické energie. SNTL ,1989. (CS)
HORÁK, K. : Výpočet elektrických sítí. SNTL, 1980. (CS)
SAADAT, H.: Power system analysis. McGraw-Hill, 1999. (EN)
TROJÁNEK, Z.,HÁJEK, J., KVASNICA, P.: Přechodné jevy v elektrizaních soustavách, SNTL/ALFA, 1987. (CS)
BLAŽEK, V., SKALA, P.: Distribuce elektrické energie, FEKT VUT v Brně, 2003. (CS)
BLAŽEK, V., SKALA, P.: Distribuce elektrické energie, Laboratorní a počítačová cvičení,elektronický text, FEKT VUT v Brně, 2003 (CS)
KERSTING, William H. Distribution system modeling and analysis. 3rd ed. Boca Raton: Taylor & Francis, c2012, xv, 439 p. ISBN 978-1-4398-5622-2. (EN)
TOMAN, P.; DRÁPELA, J.; MIŠÁK, S.; ORSÁGOVÁ, J.; PAAR, M.; TOPOLÁNEK, D.; BOK, J.; NOVOTNÝ, J.; ŠKODA, J. Provoz distribučních soustav. 1. 1. Praha: České vysoké učení technické v Praze, 2011. 264 s. ISBN: 978-80-01-04935-8. (CS)
Planned learning activities and teaching methods
Teaching methods depend on the type of course unit as specified in the article 7 of BUT Rules for Studies and Examinations. Techning methods include lectures, computer laboratories and practical laboratories. Course is taking advantage of e-learning (Moodle) system. Students have to write specified number of laboratory protocols during the course.
Assesment methods and criteria linked to learning outcomes
The course is evaluated by student’s activity in the lessons and it is finished by exam valuation. The exam has practical and theoretical part
Students can obtain:
up to 40 points from tutorial lessons (tests and protocols from laboratory exercise)
up to 60 points from the exam (30 points practical part and 30 points theoretical part). The exam is focused to verify the student understanding of the area power distribution.
Detailed requirements for completion of a course are specified by a regulation issued by the lecturer responsible for the course and updated every year.
Language of instruction
1. Basic terms
2. Equivalent networks replacing the power system (PS) elements and their parameters.
3. Basic aspects for design of electrical network
- power losses
- voltage drop
4. High and low voltage networks
- simple three-phase lines
- meshed three-phase networks
- single-phase lines and DC lines
5. Parallel and serial compensation
6. Very high voltage networks
- PS elements modeling by two-port network
7. Ratio values in three-phase systems
8. Short circuit currents and their impact on the PS elements
9. Mathematical modelling of PS when calculating the characteristic values of short circuit currents for symmetrical failures
10. Characteristic values of short circuit currents calculation for asymmetrical failures
To let the students make familiar with basic problems of power distribution.
Specification of controlled education, way of implementation and compensation for absences
The content and forms of instruction in the evaluated course are specified by a regulation issued by the lecturer responsible for the course and updated for every academic year.
Type of course unit
12 hours, compulsory
Teacher / Lecturer
Exercise in computer lab
2 hours, compulsory
Teacher / Lecturer
eLearning: currently opened course