Czech

3

Not applicable.

Institute of Concrete and Masonry Structures (BZK)

Student gains these knowledge and skills:
- basic view of the most common structural systems within reinforcement and steel load-bearing structures,
- rudimentary knowledge within the frame of design principles, reliability of civil engineering structures and load of the structures,
- basic piece of knowledge within the scope of civil engineering structures behaviour in terms of ULS (ultimate limit state), members loaded by bending moment, shearing force and combination of bending and compression.
- carrying out of simple drawings (shape and reinforcement drawing),
- the principles and rules of steel structures design – ultimate limit state, material properties,
- joints of the steel structures - the principles and rules of the design,
- tension and bend of beams, simple and buckling compression.

principles of structural mechanics and elasticity

do not required

Teaching methods depend on the type of course unit as specified in the article 7 of BUT Rules for Studies and Examinations. Education runs in the forms of lectures and trainings. Character of the lectures is based on definition of basic principles, problems and methodology. In the trainings the main subject matters are trained on individually defined projects (examples).

To gain the credit, the students should elaborate individually defined design and calculate specified task. The students are obliged to consult the design continuously in the given terms and submit it to the fixed date. The presences in training lessons are checked. An exam consists both of the written part, in which the task is elaborated, and the theoretical part. To pass the exam successfully, both parts should be accomplished.

1. Type of load-bearing structures, their characteristics and applicability. Principles and rules of design.
2. Stress and its effects on load-bearing structures, combination of stresses.
3. Properties of materials (concrete, steel) for concrete structures (strength, stress-strain diagram). Concrete structures sorting. Principles of design by the limit states.
4. Ultimate strength – direct and bending stress.
5. Ultimate strength – shearing stress, torsion moment.
6. Member of concrete structures- slabs, beams, girders, lintels.
7. Reinforced concrete structures of stairs. Plain concrete – direct and bending stress, shearing stress.
8. State and perspective of civil engineering development, introduction into the problems of design and realisation of steel load-bearing structures.
9. Material and assortment of structural members.
10. Principles and rules of steel structures reliability, method of the limit states.
11. Joints of steel structures – principles of design and structural solution.
12. Tension members. Bending of beams. Stability and buckling strength of tension members of massive, jointed and compound sections.
13. Tilting of beams. Load-bearing capacity of slender walls.

Not applicable.

To gain ability for design of reinforced concrete members and simple structures together with preparing relevant technical drawings.
To design steel members and their joints.

Extent and forms are specified by guarantor’s regulation updated for every academic year.

Not applicable.

Not applicable.

FERJENČÍK, Pavel et al.: Navrhovanie ocelových konštrukcií, 1. časť, 2. časť. Bratislava: Alfa, 1986. (SK)
NILSON, Artur, DARWIN, David a DOLAN, Charles: Design of Concrete Structures. New York: McGraf-Hill, 2009. ISBN 978-0073293493. (EN)
STUDNIČKA, Jiří: Ocelové konstrukce. Praha: ČVUT, 2011. ISBN 978-80-01-04800-9. (CS)

ČÍRTEK, Ladislav: Betonové konstrukce II. Konstrukce prutové a základové. Brno: VUTIUM, 1999. ISBN 80-214-1543-6. (CS)
SCI-The Steel Construction Institute, Ascot, U.K.: ESDEP-European Steel Design Education Programme, CD ROM. ESDEP Society, 2000. (EN)
PROCHÁZKA, Jaroslav, KOHOUTKOVÁ, Alena a VAŠKOVÁ, Jitka: Příklady navrhování betonových konstrukcí 1. Praha: ČVUT, 2007. ISBN 978-80-01-03675-4. (CS)
PROCHÁZKA, Jaroslav, ŠTĚPÁNEK, Petr, KRÁTKÝ, Jiří, KOHOUTKOVÁ, Alena a VAŠKOVÁ, Jitka: Navrhování betonových konstrukcí 1. Prvky z prostého a železového betonu. Praha: ČBS Servis, 2009. ISBN 978-80-903807-5-2. (CS)

13 hours, compulsory

1.- 2. Dimensioning of the reinforced concrete slab within USL (ultimate limit state) – effect of the bending moment.
3.- 4. Dimensioning of the reinforced concrete beam (slab and girder floor) within USL (ultimate limit state) – effect of the bending moment.
5.- 6. Dimensioning of the reinforced concrete beam (slab and girder floor) within USL (ultimate limit state) – effect of the shearing force.
7.- 8. Structural requirement and reinforcement drawing of the designed members.
9.- 12. Basic strain types and dimensioning of the steel structure members – bending moment, simple compression, buckling compression. Basic joint types of the steel structure members.
13. Credit.