Publication detail

Influence of microstructure on machinability of material and its final surface quality

PAVLOUŠKOVÁ, Z. HORYNOVÁ, M. KLAKURKOVÁ, L. JULIŠ, M. GEJDOŠ, P. REMEŠOVÁ, M.

Original Title

Influence of microstructure on machinability of material and its final surface quality

English Title

Influence of microstructure on machinability of material and its final surface quality

Type

conference paper

Language

en

Original Abstract

Mechanical properties, such as hardness, yield strength and tensile strength, are very often considered as the only key factor while selecting technological parameters of materials machining. Analysis of the microstructure and specific microstructural parameters is not performed until serious problems occur during otherwise common machining processes. This study reports few case studies, dealing with such problematics, which resulted from underestimation of the knowledge of macrostructure and microstructure of material. It deals with problems such as uncommon surface defects after machining or impossibility to use current technological machining processes when machining new batch of material.

English abstract

Mechanical properties, such as hardness, yield strength and tensile strength, are very often considered as the only key factor while selecting technological parameters of materials machining. Analysis of the microstructure and specific microstructural parameters is not performed until serious problems occur during otherwise common machining processes. This study reports few case studies, dealing with such problematics, which resulted from underestimation of the knowledge of macrostructure and microstructure of material. It deals with problems such as uncommon surface defects after machining or impossibility to use current technological machining processes when machining new batch of material.

Keywords

microstructure; surface quality; machining parameters

Released

27.11.2017

Publisher

Trans Tech Publications

Location

Switzerland

ISBN

978-80-01-06150-3

Book

Přínos metalografie pro řešení výrobních problémů

Edition

14

Pages from

112

Pages to

117

Pages count

6

BibTex


@inproceedings{BUT138787,
  author="Zina {Pavloušková} and Miroslava {Horynová} and Lenka {Klakurková} and Martin {Juliš} and Pavel {Gejdoš} and Michaela {Remešová}",
  title="Influence of microstructure on machinability of material and its final surface quality",
  annote="Mechanical properties, such as hardness, yield strength and tensile strength, are very often considered as the only key factor while selecting technological parameters of materials machining. Analysis of the microstructure and specific microstructural parameters is not performed until serious problems occur during otherwise common machining processes. This study reports few case studies, dealing with such problematics, which resulted from underestimation of the knowledge of macrostructure and microstructure of material. It deals with problems such as uncommon surface defects after machining or impossibility to use current technological machining processes when machining new batch of material.",
  address="Trans Tech Publications",
  booktitle="Přínos metalografie pro řešení výrobních problémů",
  chapter="138787",
  doi="10.4028/www.scientific.net/SSP.270.112",
  edition="14",
  howpublished="online",
  institution="Trans Tech Publications",
  year="2017",
  month="november",
  pages="112--117",
  publisher="Trans Tech Publications",
  type="conference paper"
}