Publication detail

Hardware-In-the-Loop simulator for turboprop and turboshaft engine control units

VEJLUPEK, J. JASANSKÝ, M. LAMBERSKÝ, V. GREPL, R.

Original Title

Hardware-In-the-Loop simulator for turboprop and turboshaft engine control units

English Title

Hardware-In-the-Loop simulator for turboprop and turboshaft engine control units

Type

conference paper

Language

en

Original Abstract

This paper presents the development and implementation of the Hardware-In-the-Loop (HIL) Simulator for turbo-prop and turbo-shaft engine control units (ECUs) on a low-cost embedded microcontroller. Developed HIL Simulator is a subsystem of a complex test device TPR_CPSP_SIM designed for use in the development and also in the manufacturing process of the ECUs. In this document, we describe the development process of the part of the HIL simulator, which runs the engine simulation model and provides selected signals for the tested control unit. Main goal for this project was to implement turbo-prop and turbo-shaft engine (gas turbines) TP100 and TS100 models into the microcontroller and setup the peripherals for the interaction with the rest of the system to obtain reliable HIL simulation platform.

English abstract

This paper presents the development and implementation of the Hardware-In-the-Loop (HIL) Simulator for turbo-prop and turbo-shaft engine control units (ECUs) on a low-cost embedded microcontroller. Developed HIL Simulator is a subsystem of a complex test device TPR_CPSP_SIM designed for use in the development and also in the manufacturing process of the ECUs. In this document, we describe the development process of the part of the HIL simulator, which runs the engine simulation model and provides selected signals for the tested control unit. Main goal for this project was to implement turbo-prop and turbo-shaft engine (gas turbines) TP100 and TS100 models into the microcontroller and setup the peripherals for the interaction with the rest of the system to obtain reliable HIL simulation platform.

Keywords

Hardware-In-the-Loop Simulation; Engine Control Unit; ECU; CAN Aerospace; Rapid Code Generatio

RIV year

2014

Released

02.04.2014

Publisher

europment

Location

Prague, Czech Republic

ISBN

978-1-61804-231-6

Book

COMMUNICATIONS, CIRCUITS and EDUCATIONAL TECHNOLOGIES Proceedings of the 2014 International Conference on Electronics and Communication Systems II (ECS '14)

Pages from

52

Pages to

57

Pages count

6

URL

Documents

BibTex


@inproceedings{BUT108846,
  author="Josef {Vejlupek} and Michal {Jasanský} and Vojtěch {Lamberský} and Robert {Grepl}",
  title="Hardware-In-the-Loop simulator for turboprop and turboshaft engine control units",
  annote="This  paper  presents  the  development  and implementation  of  the  Hardware-In-the-Loop (HIL)  Simulator  for turbo-prop and turbo-shaft engine control units (ECUs) on a low-cost embedded microcontroller. Developed HIL Simulator is a subsystem of  a  complex  test  device  TPR_CPSP_SIM designed  for  use  in  the development and also in the manufacturing process of the ECUs.
In this document, we describe the development process of the part of  the  HIL  simulator,  which  runs  the engine simulation  model  and provides  selected  signals  for  the  tested  control  unit.  Main  goal  for this project was to implement turbo-prop and turbo-shaft engine (gas turbines) TP100 and TS100 models into the microcontroller and setup  the  peripherals  for  the  interaction  with  the  rest  of  the system to obtain reliable HIL simulation platform.",
  address="europment",
  booktitle="COMMUNICATIONS, CIRCUITS and EDUCATIONAL TECHNOLOGIES
Proceedings of the 2014 International Conference on Electronics and Communication Systems II (ECS '14)",
  chapter="108846",
  howpublished="print",
  institution="europment",
  year="2014",
  month="april",
  pages="52--57",
  publisher="europment",
  type="conference paper"
}