Publication detail

Modelling of stress-strain states in arteries as a pre-requisite for damage prediction

BURŠA, J.

Original Title

Modelling of stress-strain states in arteries as a pre-requisite for damage prediction

English Title

Modelling of stress-strain states in arteries as a pre-requisite for damage prediction

Type

conference paper

Language

en

Original Abstract

Damage to arteries can be caused by a number of different factors ranging from the influence of mechanical load of arterial walls on endothelial cells and, consequently, on the genesis of atheromatous plaques on the inner surface of the walls, to a global tissue rupture. To predict these states, it is necessary to know not only the limit conditions and limit values but also the most credible stress and strain states. These states were solved using FEA (ANSYS program system), namely in an intact artery and in various geometric shapes of joints (anastomoses) with a vascular graft. The computational model used the axisymmetrical geometry with up to two different homogeneous coaxial layers in the artery wall. The material was supposed to be nonlinear elastic, isotropic, nearly incompressible, showing finite displacements and strains under physiologic load. The model considered three major load factors: blood pressure, axial prestretch and residual stresses. The influence of axial prestretch and residual stress on the stress (and strain) distribution in the arterial wall was quantified using the maximum to minimum stress (strain) ratio. These ratios tend to 1 at some physiological blood pressure values. Using the same type of model, the stress and strain distribution was computed for an anastomosis of the aorta with a vascular graft. Two basic types of anastomoses were modelled: a classical anastomosis and a lapped anastomosis. Due to a very complex tissue structure that is considerably simplified in the model, the results do not fully meet real needs, however they enable us to compare various shapes and geometric parameters of anastomoses. In this way, risks of clinical complications related to specific limit states of tissues, such as ruptures or growth of aneurysmas near the anastomosis, can be compared.

English abstract

Damage to arteries can be caused by a number of different factors ranging from the influence of mechanical load of arterial walls on endothelial cells and, consequently, on the genesis of atheromatous plaques on the inner surface of the walls, to a global tissue rupture. To predict these states, it is necessary to know not only the limit conditions and limit values but also the most credible stress and strain states. These states were solved using FEA (ANSYS program system), namely in an intact artery and in various geometric shapes of joints (anastomoses) with a vascular graft. The computational model used the axisymmetrical geometry with up to two different homogeneous coaxial layers in the artery wall. The material was supposed to be nonlinear elastic, isotropic, nearly incompressible, showing finite displacements and strains under physiologic load. The model considered three major load factors: blood pressure, axial prestretch and residual stresses. The influence of axial prestretch and residual stress on the stress (and strain) distribution in the arterial wall was quantified using the maximum to minimum stress (strain) ratio. These ratios tend to 1 at some physiological blood pressure values. Using the same type of model, the stress and strain distribution was computed for an anastomosis of the aorta with a vascular graft. Two basic types of anastomoses were modelled: a classical anastomosis and a lapped anastomosis. Due to a very complex tissue structure that is considerably simplified in the model, the results do not fully meet real needs, however they enable us to compare various shapes and geometric parameters of anastomoses. In this way, risks of clinical complications related to specific limit states of tissues, such as ruptures or growth of aneurysmas near the anastomosis, can be compared.

RIV year

2002

Released

15.10.2002

Publisher

WITPress, Southampton, Boston

Location

Kihei,USA

ISBN

1-85312-926-7

Book

Seventh International Conference Damage and Fracture Mechanics VII

Pages from

487

Pages to

495

Pages count

9

Documents

BibTex


@inproceedings{BUT10665,
  author="Jiří {Burša}",
  title="Modelling of stress-strain states in arteries as a pre-requisite for damage prediction",
  annote="Damage to arteries can be caused by a number of different factors ranging from the influence of mechanical load of arterial walls on endothelial cells and, consequently, on the genesis of atheromatous plaques on the inner surface of the walls, to a global tissue rupture. To predict these states, it is necessary to know not only the limit conditions and limit values but also the most credible stress and strain states. These states were solved using FEA (ANSYS program system), namely in an intact artery and in various geometric shapes of joints (anastomoses) with a vascular graft. The computational model used the axisymmetrical geometry with up to two different homogeneous coaxial layers in the artery wall. The material was supposed to be nonlinear elastic, isotropic, nearly incompressible, showing finite displacements and strains under physiologic load. The model considered three major load factors: blood pressure, axial prestretch and residual stresses. The influence of axial prestretch and residual stress on the stress (and strain) distribution in the arterial wall was quantified using the maximum to minimum stress (strain) ratio. These ratios tend to 1 at some physiological blood pressure values. Using the same type of model, the stress and strain distribution was computed for an anastomosis of the aorta with a vascular graft. Two basic types of anastomoses were modelled: a classical anastomosis and a lapped anastomosis. Due to a very complex tissue structure that is considerably simplified in the model, the results do not fully meet real needs, however they enable us to compare various shapes and geometric parameters of anastomoses. In this way, risks of clinical complications related to specific limit states of tissues, such as ruptures or growth of aneurysmas near the anastomosis, can be compared.",
  address="WITPress, Southampton, Boston",
  booktitle="Seventh International Conference Damage and Fracture Mechanics VII",
  chapter="10665",
  institution="WITPress, Southampton, Boston",
  year="2002",
  month="october",
  pages="487",
  publisher="WITPress, Southampton, Boston",
  type="conference paper"
}