Publication detail

Different Response of Cast and 3D-Printed Co-Cr-Mo Alloy to Heat Treatment: A Thorough Microstructure Characterization

ROUDNICKÁ, M. BIGAS, J. MOLNÁROVÁ, O. PALOUŠEK, D. VOJTĚCH, D.

Original Title

Different Response of Cast and 3D-Printed Co-Cr-Mo Alloy to Heat Treatment: A Thorough Microstructure Characterization

Type

journal article in Web of Science

Language

English

Original Abstract

The Co-Cr-Mo alloy is a biomaterial with very good corrosion resistance and wear resistance; thus, it is widely applied for knee replacements. The wear resistance is influenced by the amount of hcp phase and morphology of carbidic precipitates, which can both be altered by heat treatment. This study compares a conventional knee replacement manufactured by investment casting with a material prepared by the progressive technology of 3D printing. The first set of results shows a different response of both materials in increasing hardness with annealing at increasing temperatures up to the transformation temperature. Based on these results, solution treatment and subsequent aging at conditions to reach the maximum hardness was applied. Microstructural changes were studied thoroughly by means of optical, scanning electron and transmission electron microscopy. While increased hardness in the conventional material is caused by the precipitation of fine hard carbides combined with an increase in the hcp phase by isothermal transformation, a massive fcc -> hcp transformation is the main cause for the hardness increase in the 3D-printed material.

Keywords

Co-Cr-Mo alloy; additive manufacturing; selective laser melting; heat treatment

Authors

ROUDNICKÁ, M.; BIGAS, J.; MOLNÁROVÁ, O.; PALOUŠEK, D.; VOJTĚCH, D.

Released

22. 4. 2021

Publisher

MDPI

Location

BASEL

ISBN

2075-4701

Periodical

Metals

Year of study

11

Number

5

State

Swiss Confederation

Pages from

1

Pages to

21

Pages count

21

URL

https://www.mdpi.com/2075-4701/11/5/687

Full text in the Digital Library

http://hdl.handle.net/11012/204082

BibTex

@article{BUT177081,
  author="Michaela {Roudnická} and Jiří {Bigas} and Orsolya {Molnárová} and David {Paloušek} and Dalibor {Vojtěch}",
  title="Different Response of Cast and 3D-Printed Co-Cr-Mo Alloy to Heat Treatment: A Thorough Microstructure Characterization",
  journal="Metals",
  year="2021",
  volume="11",
  number="5",
  pages="1--21",
  doi="10.3390/met11050687",
  issn="2075-4701",
  url="https://www.mdpi.com/2075-4701/11/5/687"
}