Publication detail

Temperature-dependent burst failure of polymeric hollow fibers used in heat exchangers

BULEJKO, P. BARTULI, E. KŮDELOVÁ, T. VANČURA, J.

Original Title

Temperature-dependent burst failure of polymeric hollow fibers used in heat exchangers

Type

journal article in Web of Science

Language

English

Original Abstract

This work analyzes resistance of polyamide hollow fibers used for heat exchangers against extremely high pressures. Hollow fibers made of five different commercially available polyamides and one type of polyphenylene sulfide were tested at different temperatures ranging from − 40 to 160 ◦C. After getting the fiber to the required temperature, pressure from a nitrogen vessel was gradually applied to the lumen side of a fiber until the fiber rupture. The results obtained for different polymers were then analyzed using various burst pressure models used to predict pressure durability of pipelines. The result showed decreasing burst pressure of polyamide fibers mostly from 100 bars to about 50 bars with increasing temperature from − 40 to 160 ◦C. This was contrary to polyphenylene sulfide, which increased from 30 to about 60 bars in the same temperature range. The theoretical models were in a strong disagreement with experimental data and the results fluctuated significantly. However, the fibers showed outstanding durability against rupture no matter of the temperature, since the lowest burst pressure was about 40 bars at 160 ◦C. From the point of view of practical usability of polymeric hollow-fiber heat exchangers in automotive, the results indicate the polymeric fibers are able to operate at a wide range of conditions characterized by extreme temperature and pressure fluctuations typical for a car radiator.

Keywords

Hollow fibers, Burst pressure, Heat exchanger, Modelling

Authors

BULEJKO, P.; BARTULI, E.; KŮDELOVÁ, T.; VANČURA, J.

Released

1. 1. 2022

Publisher

Elsevier Ltd

ISBN

1350-6307

Periodical

ENGINEERING FAILURE ANALYSIS

Year of study

131

Number

105895

State

United Kingdom of Great Britain and Northern Ireland

Pages from

1

Pages to

16

Pages count

16

URL

https://www.sciencedirect.com/science/article/pii/S1350630721007561

BibTex

@article{BUT175621,
  author="Pavel {Bulejko} and Erik {Bartuli} and Tereza {Kůdelová} and Jan {Vančura}",
  title="Temperature-dependent burst failure of polymeric hollow fibers 
used in heat exchangers",
  journal="ENGINEERING FAILURE ANALYSIS",
  year="2022",
  volume="131",
  number="105895",
  pages="1--16",
  doi="10.1016/j.engfailanal.2021.105895",
  issn="1350-6307",
  url="https://www.sciencedirect.com/science/article/pii/S1350630721007561"
}