Czech Science Foundation - Mezinárodní projekty

- whole funder (2012-02-20 - 2014-12-31)

GCP205/12/J058

Czech

Čech Vladimír, prof. RNDr., Ph.D. - principal person responsible

Faculty of Chemistry
- (2012-02-20 - not assigned)

ČECH, V. Pulsed Plasma Used to Control Properties of a-SiOC:H Alloys. In Proceedings 7th Asia-Pacific Int. Symp. Basics Appl. Plasma Technology (APSPT-7). 2012. p. 1-4.
Detail

ČECH, V.; LASOTA, T.; PÁLESCH, E.; LUKEŠ, J. The critical influence of surface topography on nanoindentation measurements of a-SiC:H films. Surface and Coatings Technology, 2015, vol. 261, no. 1, p. 114-121. ISSN: 0257-8972.
Detail

ČECH, V.; PÁLESCH, E.; LUKEŠ, J. The Fiber-Polymer Matrix Interface/Interphase Characterized by Nanoscale Imaging Techniques. In Proc. Int. Conf. Composite Interfaces (Interface 21). 2012. p. 1-4.
Detail

ČECH, V.; BÁBÍK, A.; KNOB, A.; PÁLESCH, E. Plasma polymers used for controlled interphase in polymer composites. In Proc. 13th Int. Conf. Plasma Surface Engineering. 2012. p. 1-5.
Detail

PÁLESCH, E.; KONTÁROVÁ, S.; ČECH, V. Mechanical properties of plasma polymer films controlled by RF power. In Proc. 13th Int. Conf. Plasma Surface Engineering. 2012. p. 1-4.
Detail

ČECH, V. Pulsed Plasma Used to Control Properties of a-SiOC:H Alloys. Tatung University, Taipei, Taiwan: 2012.
Detail

ČECH, V. Plasma polymer films of controlled physical and chemical properties. National Taiwan University of Science and Technology, Taipei, Taiwan: 2012.
Detail

ČECH, V.; PÁLESCH, E.; LUKEŠ, J. The glass fiber-polymer matrix interface/interphase characterized by nanoscale imaging techniques. Composites Science and Technology, 2013, vol. 83, no. 6, p. 22-26. ISSN: 0266-3538.
Detail

PÁLESCH, E.; MAREK, A.; SOLAŘ, P.; KYLIÁN, O.; VYSKOČIL, J.; BIEDERMAN, H.; ČECH, V. Mechanical stability of titanium and plasma polymer nanoclusters in nanocomposite coatings. Thin Solid Films, 2013, vol. 544, no. 10, p. 593-596. ISSN: 0040-6090.
Detail

ČECH, V. Plasma polymer films: from nanoscale synthesis to microscale functionality. Tatung University, Taipei, Taiwan: 2013.
Detail

ČECH, V. Surface Modification of Materials by Plasma Polymers. China Medical University, Taichung, Taiwan: 2013.
Detail

ČECH, V.; KNOB, A.; HOSEIN, H.; BÁBÍK, A.; LEPCIO, P.; ONDREÁŠ, F.; DRZAL, L. Enhanced interfacial adhesion of glass fibers by tetravinylsilane plasma modification. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2014, vol. 58, no. 1, p. 84-89. ISSN: 1359-835X.
Detail

HOFEREK, L.; MISTRÍK, J.; TRIVEDI, R.; CHEN, K.; PEŘINA, V.; ČECH, V. Multilayer and functionally gradient films of plasma polymers intended as compatible interlayers for hybrid materials. Surface and Coatings Technology, 2014, vol. 254, no. 1, p. 49-53. ISSN: 0257-8972.
Detail

SVĚRÁK, T. Do you wish to save energy when grinding cement clinker? Do not be afraid of chemistry then!. ECRA Round Table “Future Grinding Technologies”, Duesseldorf: European Cement Research Academy, 2014.
Detail

ČECH, V. Surface modification for medical materials using carbon-based isotropic and anisotropic films synthesized by plasma nanotechnology (extensive version). 2014.
Detail

ČECH, V. Surface modification for medical materials using carbon-based isotropic and anisotropic films synthesized by plasma nanotechnology. 2014.
Detail

ČECH, V.; PÁLESCH, E.; KUCHARČÍK, J.; KYLIÁN, O.; MAREK, A.; KNOB, A.; PLICHTA, T.; CHEN, K. Surface modification for medical materials using carbon-based isotropic and anisotropic films synthesized by plasma nanotechnology. Taiwan: 2014. p. 1 (1 s.).
Detail

CHEN, K.; LIU, W.; ČECH, V.; INAGAKI, N. Transparent Protective Coating by Plasma Polymerization of Vinyltrimethylsilane or Hexamethyldisilazane and Oxygen Post-treatment. Germany: 2014. p. 1 (1 s.).
Detail

KNOB, A.; BÁBÍK, A.; ČECH, V.; DRZAL, L. Mechanical response of plasma polymer interlayers in polymer composites. 2014. p. 1 (1 s.).
Detail

KUCHARČÍK, J.; MISTRÍK, J.; ČECH, V. Optical properties of isotropic and anisotropic films deposited by pulsed plasma. 2014. p. 1 (1 s.).
Detail

ČECH, V.; HOFEREK, L.; TRIVEDI, R.; KONTÁROVÁ, S. Monomer deficient conditions used to control physical properties of plasma polymer films in wide ranges by RF power. 2014. p. 1 (1 s.).
Detail

ČECH, V.; KNOB, A.; PÁLESCH, E.; KUCHARČÍK, J.; PLICHTA, T. Plasma Processing of Glass-Fiber Reinforcements for Polymer Composites. Kerala, India: 2014. p. 1 (1 s.).
Detail

ČECH, V.; KNOB, A.; PÁLESCH, E.; KUCHARČÍK, J.; PLICHTA, T. Plasma Processing of Glass-Fiber Reinforcements for Polymer Composites. 2014.
Detail

ČECH, V.; KNOB, A.; HOSEIN, H.; BÁBÍK, A.; DRZAL, L. Enhanced Interfacial Adhesion of Glass Fibers by Tetravinylsilane Plasma Modification. In Proc. Int. Conf. Composite Interfaces (Interface 21). 2012. p. 1-4.
Detail