Přístupnostní navigace
E-application
Search Search Close
Project detail
Duration: 01.01.2011 — 31.12.2013
Funding resources
Czech Science Foundation - Standardní projekty
- whole funder (2011-01-01 - 2013-12-31)
On the project
Navrhnout technologii přípravy ochranných povrchových difúzních vrstev na litou niklovou superslitinu Inconel 713LC, která by vedla ke zvýšení životnosti tohoto materiálu v podmínkách nízkocyklové únavy za vysoké teploty
Description in EnglishThe proposed project is directed to manufacture the composite, made up of a protective diffusion layer on the surface of cast nickel base superalloy Inconel 713LC, for high temperature application in an oxidizing and corrosive atmosphere under the operation of cyclic straining. The main goal is to find out an optimum technology of protective layer deposition base on the surface saturation with Al, and with Al in combination with Si and with Cr. The thermal regime of deposition and substrate surface treatment will be specified. The project solution will bring new complex data on the effect of deposition parameters on chemical, phase, structural, and mechanical properties of the protective layers. The structure and phase evolution of the layers exposed to high temperature will be analysed. The influence of the layers on the fatigue life of the superalloy will be obtained both in continuous cycling and in cycling with dwells at high temperature in air. Mechanisms leading to the composite degradation under the cyclic straining and under the high temperature exposition will be identified
Keywordsochranné difúzní vrstvy; niklové superslitiny
Key words in Englishochranné difúzní vrstvy; niklové superslitiny
Mark
GAP107/11/2065
Default language
Czech
People responsible
Podrábský Tomáš, prof. Ing., CSc. - fellow researcherObrtlík Karel, doc. RNDr., CSc. - principal person responsible
Units
Dept. of Metal Materials- (2011-01-01 - 2013-12-31)
Results
POSPÍŠILOVÁ, S.; OBRTLÍK, K.; JULIŠ, M.; PODRÁBSKÝ, T. Initiation and Growth of Fatigue Cracks in Inconel 713LC with Al Coating at 800 degC. Chemické listy, 2011, vol. 105, no. S, p. 840-841. ISSN: 0009-2770.Detail
OBRTLÍK, K.; HUTAŘOVÁ, S.; ČELKO, L.; JULIŠ, M.; PODRÁBSKÝ, T.; ŠULÁK, I. Effect of thermal barrier coating on low cycle fatigue behavioir of cast Inconel 713LC at 900 oC. In Advanced Materials Research. Advanced Materials Research. Switzerland: Trans Tech Publications, 2014. p. 848-853. ISSN: 1022-6680.Detail
ŠMÍD, M.; OBRTLÍK, K.; PETRENEC, M.; POLÁK, J. Effect of tensile dwell on low cycle fatigue of cast superalloy Inconel 792-5A at 800 C. Key Engineering Materials (print), 2012, vol. 2012, no. 488-489, p. 735-738. ISSN: 1013-9826.Detail
OBRTLÍK, K.; POSPÍŠILOVÁ, S.; JULIŠ, M.; PODRÁBSKÝ, T.; POLÁK, J. Effect of Al and AlSi diffusion coating on the low cycle fatigue behavior of Inconel 713LC. Procedia Engineering, 2011, vol. 2011, no. 10, p. 1360-1365. ISSN: 1877-7058.Detail
JULIŠ, M.; OBRTLÍK, K.; POSPÍŠILOVÁ, S.; PODRÁBSKÝ, T.; POLÁK, J. Influence of AlSi diffusion coating on low cycle fatigue properties of cast superalloy Inconel 738LC at 800deg. Key Engineering Materials (print), 2012, vol. 488-489, no. 1, p. 307-310. ISSN: 1013-9826.Detail
OBRTLÍK, K.; POSPÍŠILOVÁ, S.; JULIŠ, M.; PODRÁBSKÝ, T.; POLÁK, J. Fatigue behaviour of coated and uncoated cast Inconel 713LC at 800 deg. INTERNATIONAL JOURNAL OF FATIGUE, 2012, vol. 41, no. ., p. 101-106. ISSN: 0142-1123.Detail
JULIŠ, M.; KUSMIČ, D.; ŠMÍD, M.; PRŮŠA, S.; POSPÍŠILOVÁ, S.; OBRTLÍK, K.; PODRÁBSKÝ, T. Surface relief observation in fatigued cast superalloy Inconel 738LC using CSLM, SEM-FEG and AFM. In International Conference on Military Technology ICMT'11. 1. Brno: University of Defence (Univerzita obrany), 2011. p. 1493-1499. ISBN: 978-80-7231-787-5.Detail
ŘIČÁNKOVÁ, V.; ČELKO, L.; KLAKURKOVÁ, L.; ŠVEJCAR, J. MIKROSTRUCTURAL CHANGES OF AIR PLASMA SPRAYED CoNiCrAlY COATING AFTER REMELTING. In METAL 2012 Conference proceedings. 1. Ostrava: TANGER Ltd., 2012. p. 442-447. ISBN: 978-80-87294-29-1.Detail
OBRTLÍK, K.; HUTAŘOVÁ, S.; JULIŠ, M.; ČELKO, L.; PODRÁBSKÝ, T. Effect of Plasma sprayed AlSi coating on low cycle fatigue properties of cast superalloy Inconel 738LC. In METAL 2012 Conference proceedings. 1. Ostrava: TANGER Ltd., 2012. p. 1013-1018. ISBN: 978-80-87294-29-1.Detail
OBRTLÍK, K.; HUTAŘOVÁ, S.; JULIŠ, M.; PODRÁBSKÝ, T.; KRUML, T. Influence of Al-Cr diffusion coating on low cycle fatigue behavior of cast nickel-base superalloy at 800 C. In 19th European Conference on Fracture. Russia: Kazan, 2012. p. 1-7. ISBN: 978-5-905576-18-8.Detail
POKLUDA, J.; OBRTLÍK, K.; SLÁMEČKA, K.; HORNÍKOVÁ, J.; HUTAŘOVÁ, S.; KIANICOVÁ, M.; PODRÁBSKÝ, T. Fatigue Crack Paths in Cast Inconel 713LC with/without Al Diffusion Coating under Various Loading and Temperature Conditions. In Proceedings of the 4th International Conference on Crack Paths. 2012. s. 967-975. ISBN: 9788895940441.Detail
JECH, D.; ČELKO, L.; KLAKURKOVÁ, L.; HUTAŘOVÁ, S.; JULIŠ, M.; ŠVEJCAR, J. Structural stability of plasma sprayed CoNiCrAlY – ZrO2+Y2O3 thermal barrier coatings after isothermal exposure at 1050 C. In Metal 2013. 1. Ostrava: TANGER Ltd., 2013. p. 1015-1020. ISBN: 978-80-87294-41-3.Detail
JECH, D.; ČELKO, L.; JULIŠ, M.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; OBRTLÍK, K.; ŠVEJCAR, J. Critical Weak Points of Atmospheric Plasma Sprayed Thermal Barrier Coatings. Slovakia: Department of Material Science, Faculty of Metallurgy, Technical University of Košice, 2013. p. 82-82. ISBN: 978-80-553-1412-9.Detail
JECH, D.; ČELKO, L.; KLAKURKOVÁ, L.; HUTAŘOVÁ, S.; JULIŠ, M.; ŠVEJCAR, J. Structural Stability of Plasma Sprayed CoNiCrAlY – ZrO2+Y2O3 Thermal Barrier Coatings After Isothermal Exposure at 1050 C. Metal 2013. 1. Ostrava: TANGER Ltd., 2013. p. 73-73. ISBN: 978-80-87294-39-0.Detail
ČELKO, L.; HUTAŘOVÁ, S.; OBRTLÍK, K.; JULIŠOVÁ, M.; PODRÁBSKÝ, T. Microstructural Characterisations of Slurry Aluminide Diffusion Coatings. Slovakia: Department of Material Science, Faculty of Metallurgy, Technical University of Košice, 2013. p. 83-83. ISBN: 978-80-553-1412-9.Detail
HUTAŘOVÁ, S.; OBRTLÍK, K.; JULIŠ, M.; ČELKO, L.; JULIŠOVÁ, M.; PODRÁBSKÝ, T. Degradation of TBC Coating during Low-cycle Fatigue Tests at High Temperature. In Key Engineering Materials. Key Engineering Materials (print). Zurich-Durnten, Switzerland: Trans Tech Publications Ltd, 2014. p. 461-464. ISBN: 9783037859346. ISSN: 1013-9826.Detail
ČELKO, L.; JECH, D.; SKALKA, P.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; SPOTZ, Z.; ŠVEJCAR, J. Microstructural Characterization of Thermally Grown Oxide in Atmospheric Plasma Sprayed Thermal Barier Coatings. ICCE-21, Tenerife, Proceedings. 1. Spain: Universidad de La Laguna, 2013. p. 1-2.Detail
JECH, D.; ČELKO, L.; JULIŠ, M.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; OBRTLÍK, K.; ŠVEJCAR, J. Critical Weak Points of Atmospheric Plasma Sprayed Thermal Barrier Coatings. In Metallography XV. Materials Science Forum. Switzerland: Trans Tech Publication, 2014. p. 567-572. ISBN: 978-3-03835-072-9. ISSN: 0255-5476.Detail
ČELKO, L.; HUTAŘOVÁ, S.; OBRTLÍK, K.; PETRENEC, M.; JULIŠOVÁ, M.; PODRÁBSKÝ, T. Microstructural Characterization of Slurry Aluminide Diffusion Coatings. In Metallography XV. Materials Science Forum. Switzerland: Trans Tech Publications, 2014. p. 584-589. ISBN: 978-3-03835-072-9. ISSN: 0255-5476.Detail
JULIŠ, M.; KUSMIČ, D.; POSPÍŠILOVÁ, S.; PRŮŠA, S.; OBRTLÍK, K.; DLUHOŠ, J.; PODRÁBSKÝ, T. Study of Surface Relief Evolution in Cyclically Strained Superalloy IN738LC Using advanced Experimental Techniques. Chemické listy, 2011, vol. 105, no. S, p. 814-815. ISSN: 0009-2770.Detail