Detail publikace

Determination of the Johnson-Cook Material Model of EN AW 6061-T6511 with evaluation for grooving machining

ZOUHAR, J. GABRIŠ, A. JOPEK, M. PODANÝ, K.

Originální název

Determination of the Johnson-Cook Material Model of EN AW 6061-T6511 with evaluation for grooving machining

Typ

článek ve sborníku mimo WoS a Scopus

Jazyk

angličtina

Originální abstrakt

This paper deals with modelling of a grooving machining process that includes chip formation and tool loading. The finite element method (FEM) is used for a simulation based on the Lagrangian formulation, including ANSYS/LS-DYNA software. The constitutive Johnson-Cook material model regarding strain and strain rate to predict material plasticity and chip separation is used. The model was determined based on the Taylor test, where a cylindrical specimen is shot against a solid substrate. Based on the final reshaping of the test specimen and the resulting stresses on the impact plate and comparing it with the numerical simulation, the individual parameters of the Johnson-Cook constitutive equation can be determined. Loading forces, chip morphology, stress and strain have been obtained. The Results are compared with experimental results and other references.

Klíčová slova

Orthogonal cutting, Taylor anvil test, Johnson-Cook, Explicit lagrangian, Machining, Simultion

Autoři

ZOUHAR, J.; GABRIŠ, A.; JOPEK, M.; PODANÝ, K.

Vydáno

6. 6. 2022

Nakladatel

Czech Technical University in Prague, Faculty of Mechanical Engineering, Department of Mechanics, Biomechanics and Mechatronics, Technická 4, 160 00 Prague 6

Místo

Prague

ISBN

978-80-01-07010-9

Kniha

Experimental Stress Analysis 2022 Book of Extended Abstract

Edice

first

Strany od

152

Strany do

153

Strany počet

2

BibTex

@inproceedings{BUT183166,
  author="Jan {Zouhar} and Andrej {Gabriš} and Miroslav {Jopek} and Kamil {Podaný}",
  title="Determination of the Johnson-Cook Material Model of EN AW 6061-T6511 with evaluation for grooving machining",
  booktitle="Experimental Stress Analysis 2022 Book of Extended Abstract",
  year="2022",
  series="first",
  pages="152--153",
  publisher="Czech Technical University in Prague, Faculty of Mechanical Engineering, Department of Mechanics, Biomechanics and Mechatronics, Technická 4, 160 00 Prague  6",
  address="Prague",
  isbn="978-80-01-07010-9"
}