Detail publikace

Determination of Residual Stresses in Cylindrical Components by the Hole-drilling Method

HALABUK, D. NÁVRAT, T.

Originální název

Determination of Residual Stresses in Cylindrical Components by the Hole-drilling Method

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

Background The hole-drilling method is a widely used technique for the determination of residual stresses, but the application of the method requires a planar surface of the measured component. Objective Since many components have a cylindrical surface in industrial practice, this study focuses on the determination of residual stresses in cylindrical components. Methods Several cylindrical bodies with various residual stress states were simulated and the method described in ASTM E837 standard was used for the evaluation process. In order to properly simulate the required residual stress states in cylindrical bodies, a new approach for the application of load into the finite element models of hole-drilling experiment is presented. Furthermore, a new procedure with four sets of calibration coefficients is proposed to determine the uniform residual stresses in cylindrical bodies. Results Based on the obtained results, the factors affecting the evaluation are identified and the errors of residual stresses evaluated by ASTM E837 standard are quantified for several cylindrical bodies. Moreover, the testing of the procedure with four sets of calibration coefficients shows a negligible relative error of the evaluated residual stresses even for cylindrical bodies with a small radius. Conclusions It can be stated that the proposed procedure significantly improves the evaluation of the uniform residual stresses in cylindrical bodies. The results of this study can also be used to estimate an error in practical measurements or to determine the radius of a cylindrical body, which is still acceptable when the residual stresses are evaluated by ASTM E837 standard.

Klíčová slova

Hole-drilling method; Residual stress; Cylindrical component; Finite element simulation

Autoři

HALABUK, D.; NÁVRAT, T.

Vydáno

5. 1. 2022

Nakladatel

SPRINGER

Místo

NEW YORK

ISSN

0014-4851

Periodikum

EXPERIMENTAL MECHANICS

Ročník

62

Číslo

1

Stát

Spojené království Velké Británie a Severního Irska

Strany od

87

Strany do

99

Strany počet

13

URL

https://link.springer.com/article/10.1007/s11340-021-00765-y

BibTex

@article{BUT172474,
  author="Dávid {Halabuk} and Tomáš {Návrat}",
  title="Determination of Residual Stresses in Cylindrical Components by the Hole-drilling Method",
  journal="EXPERIMENTAL MECHANICS",
  year="2022",
  volume="62",
  number="1",
  pages="87--99",
  doi="10.1007/s11340-021-00765-y",
  issn="0014-4851",
  url="https://link.springer.com/article/10.1007/s11340-021-00765-y"
}