Detail publikace

Modelling of Three-point Bending Test of Beams with Steel Inclusion Situated in the Middle of the Span

VYHLÍDAL, M. KERŠNER, Z.

Originální název

Modelling of Three-point Bending Test of Beams with Steel Inclusion Situated in the Middle of the Span

Typ

článek v časopise - ostatní, Jost

Jazyk

angličtina

Originální abstrakt

The aim of this paper is to present the numerical model of the fracture response of the test specimens with a steel inclusion in the shape of the prisms which length is equal to the specimen’s width. Specially designed fine-grained cement-based matrix specimens of the nominal dimension 40 × 40 × 160 mm with inclusion of 8 × 8 × 40 mm and central edge notch serves to determine of the influence of the interfacial transition zone on the effective mechanical fracture parameters of composite. The numerical models of three-point bending test of these specimens are created in ATENA software.

Klíčová slova

Fine-grained composite, Interfacial Transition Zone, numerical model, steel inclusion, three-point bending

Autoři

VYHLÍDAL, M.; KERŠNER, Z.

Vydáno

31. 12. 2018

Nakladatel

Technical University of Ostrava

Místo

Ostrava

ISSN

1804-4824

Periodikum

Transactions of the VŠB – Technical University of Ostrava, Civil Engineering Series

Ročník

18

Číslo

2

Stát

Česká republika

Strany od

73

Strany do

79

Strany počet

7

BibTex

@article{BUT153338,
  author="Michal {Vyhlídal} and Zbyněk {Keršner}",
  title="Modelling of Three-point Bending Test of Beams with Steel Inclusion Situated in the Middle of the Span",
  journal="Transactions of the VŠB – Technical University of Ostrava, Civil Engineering Series",
  year="2018",
  volume="18",
  number="2",
  pages="73--79",
  doi="10.31490/tces-2018-0020",
  issn="1804-4824"
}