Detail publikace

Study of Initial Stages of Fatigue Process in Selective Laser Melting Material Using Acoustic Emission Method

KRATOCHVÍLOVÁ, V. ZEMANOVÁ, L. VLAŠIC, F. MAZAL, P.

Originální název

Study of Initial Stages of Fatigue Process in Selective Laser Melting Material Using Acoustic Emission Method

Typ

článek v časopise ve Scopus, Jsc

Jazyk

angličtina

Originální abstrakt

This paper deals with the evaluation of the fatigue tests and subsequent analyses of damage processes in selective laser melting (SLM) materials under bending loading. Compared to conventional production technologies (casting, forming and machining), SLM offers a wide range of benefits, e.g. production with no need for expensive molds, very low material waste and the possibility to create complex geometric shapes. The acoustic emission method was used to fully understand the processes which appear in the stages preceding the crack initiation. The fatigue tests at room temperature were conducted on standard wrought 2618A aluminium alloy as a representative testing material and the same material created by SLM. The main aim of the study was to compare the acoustic emission signal during fatigue loading at different manufacturing parameters of SLM material and to analyze in detail the signal changes in initial stages of fatigue process. The results show the high sensitivity of the acoustic emission technology in the fracture behaviour of SLM material and transition from the stage of surface relief evolution to the stage of crack nucleation and propagation. After carried out dynamic mechanical tests, a detailed fractographic analysis was conducted to assess material response to mechanical loading. Attention was focused on determining the predominant failure mechanisms and the influence of defects or inhomogeneities such as pores, cavities, etc. resulting from the production of materials using SLM method.

Klíčová slova

acoustic emission method; selective laser melting; fatigue loading; crack

Autoři

KRATOCHVÍLOVÁ, V.; ZEMANOVÁ, L.; VLAŠIC, F.; MAZAL, P.

Vydáno

8. 12. 2016

Nakladatel

Trans Tech Publication Inc.

ISSN

1662-9779

Periodikum

Solid State Phenomena

Číslo

258

Stát

Švýcarská konfederace

Strany od

477

Strany do

480

Strany počet

4

URL

BibTex

@article{BUT129951,
  author="Vendula {Skřivánková} and Lucie {Zemanová} and František {Vlašic} and Pavel {Mazal}",
  title="Study of Initial Stages of Fatigue Process in Selective Laser Melting Material Using Acoustic Emission Method",
  journal="Solid State Phenomena",
  year="2016",
  number="258",
  pages="477--480",
  doi="10.4028/www.scientific.net/SSP.258.477",
  issn="1662-9779",
  url="http://www.scientific.net/"
}