Detail publikace

SIMULATION MODELLING OF MACHINE TOOLS WITH FLEXIBLE PARTS AS MECHATRONIC SYSTEM

Originální název

SIMULATION MODELLING OF MACHINE TOOLS WITH FLEXIBLE PARTS AS MECHATRONIC SYSTEM

Anglický název

SIMULATION MODELLING OF MACHINE TOOLS WITH FLEXIBLE PARTS AS MECHATRONIC SYSTEM

Jazyk

en

Originální abstrakt

This paper deals with a simulation modelling of machine tools, which are modelled as mechatronic system with rigid and flexible parts. These models are used for dynamic analysis of the cutting process and behaviour of the whole mechatronic system is analysed. The co-simulation technique is used for this analysis in which the multi-body model of the machine tool in ADAMS is excited and controlled by a model in MATLAB/SIMULINK environment. This model is very important for industrial analyses of machine tools for a prediction of chatter. The unwanted chatter can be eliminated by suitable redesign of the machine tool in the mechatronic model or using an active damping control during machine operation. The co-simulation model can be used for both tasks.

Anglický abstrakt

This paper deals with a simulation modelling of machine tools, which are modelled as mechatronic system with rigid and flexible parts. These models are used for dynamic analysis of the cutting process and behaviour of the whole mechatronic system is analysed. The co-simulation technique is used for this analysis in which the multi-body model of the machine tool in ADAMS is excited and controlled by a model in MATLAB/SIMULINK environment. This model is very important for industrial analyses of machine tools for a prediction of chatter. The unwanted chatter can be eliminated by suitable redesign of the machine tool in the mechatronic model or using an active damping control during machine operation. The co-simulation model can be used for both tasks.

Dokumenty

BibTex


@inproceedings{BUT75378,
  author="Tomáš {Březina} and Jan {Vetiška} and Zdeněk {Hadaš}",
  title="SIMULATION MODELLING OF MACHINE TOOLS WITH FLEXIBLE PARTS AS MECHATRONIC SYSTEM",
  annote="This paper deals with a simulation modelling of machine tools, which are modelled as mechatronic system with rigid and flexible parts. These models are used for dynamic analysis of the cutting process and behaviour of the whole mechatronic system is analysed. The co-simulation technique is used for this analysis in which the multi-body model of the machine tool in ADAMS is excited and controlled by a model in MATLAB/SIMULINK environment. This model is very important for industrial analyses of machine tools for a prediction of chatter. The unwanted chatter can be eliminated by suitable redesign of the machine tool in the mechatronic model or using an active damping control during machine operation. The co-simulation model can be used for both tasks.",
  address="Expertia o.p.s.",
  booktitle="Proceedings of the International Conference on Advances in Mechatronics 2011 (AIM 11)",
  chapter="75378",
  edition="1",
  howpublished="online",
  institution="Expertia o.p.s.",
  year="2011",
  month="december",
  pages="99--104",
  publisher="Expertia o.p.s.",
  type="conference paper"
}