Detail publikace

Carbon nanotubes: Possibility of their usage as modern conducting wires

Originální název

Carbon nanotubes: Possibility of their usage as modern conducting wires

Anglický název

Carbon nanotubes: Possibility of their usage as modern conducting wires

Jazyk

en

Originální abstrakt

Carbon nanotubes (CNTs) were manufactured in pressure microwave plasma torch to create modern conducting wire. CNTs were synthesized in the mixture of argon, methane and hydrogen on the silicon substrate with SiO2 buffer layer and a thin top iron film serving as a catalyst. One of the research surveys includes measurements of their electrical properties such as current-voltage (I–V) characteristics for application as modern conducting wires. Preparation of solutions with well dispersed CNTs was studied using distilled water and ethyl alcohol with ultrasonication utilization. Dried solution’s drops were studied by scanning electron microscopy (SEM). The electrical measurement chips with gold electrodes were made by electron beam lithography (EBL). CNTs were placed on the measurement chips by dropping their solution and the I–V characteristics may be measured by contacting the electrodes bridged by CNTs.

Anglický abstrakt

Carbon nanotubes (CNTs) were manufactured in pressure microwave plasma torch to create modern conducting wire. CNTs were synthesized in the mixture of argon, methane and hydrogen on the silicon substrate with SiO2 buffer layer and a thin top iron film serving as a catalyst. One of the research surveys includes measurements of their electrical properties such as current-voltage (I–V) characteristics for application as modern conducting wires. Preparation of solutions with well dispersed CNTs was studied using distilled water and ethyl alcohol with ultrasonication utilization. Dried solution’s drops were studied by scanning electron microscopy (SEM). The electrical measurement chips with gold electrodes were made by electron beam lithography (EBL). CNTs were placed on the measurement chips by dropping their solution and the I–V characteristics may be measured by contacting the electrodes bridged by CNTs.

Dokumenty

BibTex


@inproceedings{BUT24919,
  author="Richard {Ficek} and Radimír {Vrba} and Stephen {Goodnick} and Bo-Hyun {Kim} and Srdjan {Milicic}",
  title="Carbon nanotubes: Possibility of their usage as modern conducting wires",
  annote="Carbon nanotubes (CNTs) were manufactured in pressure microwave plasma torch to create modern conducting wire. CNTs were synthesized in the mixture of argon, methane and hydrogen on the silicon substrate with SiO2 buffer layer and a thin top iron film serving as a catalyst. One of the research surveys includes measurements of their electrical properties such as current-voltage (I–V) characteristics for application as modern conducting wires. Preparation of solutions with well dispersed CNTs was studied using distilled water and ethyl alcohol with ultrasonication utilization. Dried solution’s drops were studied by scanning electron microscopy (SEM). The electrical measurement chips with gold electrodes were made by electron beam lithography (EBL). CNTs were placed on the measurement chips by dropping their solution and the I–V characteristics may be measured by contacting the electrodes bridged by CNTs.",
  address="Vysoké učení technické v Brně",
  booktitle="Seminář o řešení projektu GA ČR 102/03/H105. Moderní metody řešení, návrhu a aplikace elektronických obvodů",
  chapter="24919",
  institution="Vysoké učení technické v Brně",
  year="2006",
  month="november",
  pages="66",
  publisher="Vysoké učení technické v Brně",
  type="conference paper"
}