Detail publikace

Effect of post process shear straining on structure and mechanical properties of 316 L stainless steel manufactured via powder bed fusion

KUNČICKÁ, L. KOCICH, R. NÉMETH, G. DVOŘÁK, K. PAGÁČ, M.

Originální název

Effect of post process shear straining on structure and mechanical properties of 316 L stainless steel manufactured via powder bed fusion

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

Powder Bed Fusion (PBF) has become popular despite the fact that PBF-prepared components feature characteristic defects. Their performance, however, can be shifted to the next level by the application of postprocessing, advantageously via intensive plastic deformation. The study characterizes the effects of rotary swaging performed at hot, cold, and cryogenic conditions on the (sub)structure and mechanical properties of workpieces of AISI 316 L stainless steel, favourably used in constructions as well as medicine, manufactured by PBF. The workpieces built in the horizontal and vertical directions were analysed to assess their structures, residual strain and stress, density, and porosity; porosity was observed primarily in the horizontally built workpiece also featuring lower density and larger average grain size. Subsequently, the workpieces were subjected to rotary swaging, which contributed to (almost) complete elimination of porosity, evident substructure development, and significant grain refinement – the vertically built workpiece exhibited the avg. grain size of 2.3 μm, 1.8 μm, and 0.1 μm after hot, cold, and cryo swaging. The cryo-swaged sample also exhibited specific texture, room temperature ultimate tensile strength (UTS) of more than 2 000 MPa, and two times higher microhardness compared to the as-build workpiece. All the swaged pieces exhibited significantly improved mechanical properties, even at the testing temperature of 900 °C.

Klíčová slova

Rotary swaging; Powder bed fusion; AISI 316 L; Stainless steel; Microstructure;

Autoři

KUNČICKÁ, L.; KOCICH, R.; NÉMETH, G.; DVOŘÁK, K.; PAGÁČ, M.

Vydáno

8. 9. 2022

Nakladatel

ELSEVIER

Místo

AMSTERDAM

ISSN

2214-8604

Periodikum

Additive Manufacturing

Ročník

59

Číslo

1

Stát

Nizozemsko

Strany od

1

Strany do

15

Strany počet

15

URL

https://www.sciencedirect.com/science/article/pii/S2214860422005176?via%3Dihub

BibTex

@article{BUT179206,
  author="Lenka {Kunčická} and Radim {Kocich} and Gergely {Németh} and Karel {Dvořák} and Marek {Pagáč}",
  title="Effect of post process shear straining on structure and mechanical properties of 316 L stainless steel manufactured via powder bed fusion",
  journal="Additive Manufacturing",
  year="2022",
  volume="59",
  number="1",
  pages="1--15",
  doi="10.1016/j.addma.2022.103128",
  issn="2214-8604",
  url="https://www.sciencedirect.com/science/article/pii/S2214860422005176?via%3Dihub"
}