Detail publikace

Impact of Aggressive Media on the Properties of Polymeric Coatings with Solidification Products as Fillers

HODUL, J. MÉSZÁROSOVÁ, L. ŽLEBEK, T. DROCHYTKA, R. DUFEK, Z.

Originální název

Impact of Aggressive Media on the Properties of Polymeric Coatings with Solidification Products as Fillers

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

Dealing with waste materials, particularly hazardous waste, is a serious problem. Disposal areas keep growing, and the costs incurred are high. Disposing of such waste reduces negative environmental impacts and offers considerable financial savings. This paper focuses on the possibilities of incorporating pollutants found in hazardous wastes as fillers in coatings based on polymers (epoxide and polyurethane). These coatings are intended mainly for concrete and metal bases and offer secondary protection against adverse weather conditions. Important physical and mechanical properties of the newly developed materials were determined; they include surface hardness, impact resistance, tensile properties, and chemical resistance. These properties were also compared to those of the reference filler. At the same time, the influence of aggressive media on the properties of these materials was observed, in particular on flexural characteristics. The microstructures of the developed coatings were tested using a high-resolution optical microscope, before and after exposure to the chemicals. The positive effect of using progressive fillers, such as solidified hazardous waste (a solidification product (SF)), was witnessed by their constructive contribution to the materials’ physical and mechanical properties. The use of solidification products is unambiguously advantageous from technical, ecological, and economical stand points (utilization of hazardous waste as a progressive filler instead of landfilling, improvement of tensile properties, reduction in the price of coating system, and incorporation of the pollutants into the polymer matrix).

Klíčová slova

epoxy resin; polyurethane; solidification technology; hazardous waste; fly ash; coating materials; microstructure; chemical stress

Autoři

HODUL, J.; MÉSZÁROSOVÁ, L.; ŽLEBEK, T.; DROCHYTKA, R.; DUFEK, Z.

Vydáno

26. 11. 2019

Nakladatel

MDPI

Místo

Basel, Switzerland

ISSN

2079-6412

Periodikum

Coatings, MDPI

Ročník

9

Číslo

12

Stát

Švýcarská konfederace

Strany od

1

Strany do

24

Strany počet

24

URL

https://www.mdpi.com/2079-6412/9/12/793

Plný text v Digitální knihovně

http://hdl.handle.net/11012/184675

BibTex

@article{BUT160612,
  author="Jakub {Hodul} and Lenka {Mészárosová} and Tomáš {Žlebek} and Rostislav {Drochytka} and Zdeněk {Dufek}",
  title="Impact of Aggressive Media on the Properties of Polymeric Coatings with Solidification Products as Fillers",
  journal="Coatings, MDPI",
  year="2019",
  volume="9",
  number="12",
  pages="1--24",
  doi="10.3390/coatings9120793",
  issn="2079-6412",
  url="https://www.mdpi.com/2079-6412/9/12/793"
}