Detail publikace

A comparison of two modal analysis methods: An impact hammer versus laser vibrometry

KREJČÍ, J. BENEŠ, P.

Originální název

A comparison of two modal analysis methods: An impact hammer versus laser vibrometry

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

This paper presents a comparative experimental-analytical study on the performance of Multi-Input Single-Output (MISO) and Single-Input Multi-Output (SIMO) techniques to identify the modal properties of a cantilever beam. A 2-D laser interferometry was employed to perform the SIMO modal test, while for the MISO test configuration, a conventional accelerometer was used to measure the response of the structure. Comparing the experimentally-measured natural frequencies with those calculated by the FEM model, a maximum difference of 4% between natural frequencies was observed. The repeatability of both techniques is also investigated in this paper and it is shown that the difference between modal properties identified under different operators is less than 0.5% for both the MISO and SIMO techniques.

Klíčová slova

modal analysis, free beam, 2D interferometer, COMSOL, ModalVIEW

Autoři

KREJČÍ, J.; BENEŠ, P.

Vydáno

19. 11. 2020

Nakladatel

Czech Technical University in Prague

Místo

Prague

ISSN

1805-2363

Periodikum

Acta Polytechnica (on-line)

Ročník

60

Číslo

5

Stát

Česká republika

Strany od

420

Strany do

427

Strany počet

7

URL

Plný text v Digitální knihovně

BibTex

@article{BUT156812,
  author="Jakub {Krejčí} and Petr {Beneš}",
  title="A comparison of two modal analysis methods: An impact hammer versus laser vibrometry",
  journal="Acta Polytechnica (on-line)",
  year="2020",
  volume="60",
  number="5",
  pages="420--427",
  doi="10.14311/AP.2020.60.0420",
  issn="1805-2363",
  url="https://ojs.cvut.cz/ojs/index.php/ap/article/view/6050"
}