Detail publikace

Influence of Technological Procedures on Mechanical Properties of Bonded Joint

LIŠKA, P. NEČASOVÁ, B. ŠLANHOF, J.

Originální název

Influence of Technological Procedures on Mechanical Properties of Bonded Joint

Typ

článek v časopise ve Scopus, Jsc

Jazyk

angličtina

Originální abstrakt

It would not be an exaggeration to say that adhesive joints have been an essential part of the construction industry for several decades now. However, a substantial disadvantage of bonded joints are the very strict requirements for adherence to the technological procedures defined by the manufacturers of assembly systems. Even a slight deviation from the recommended application steps can have a significant effect on the integrity of the entire system. In the research, five of the most common types of failure to comply with technological procedures in the realization of facade cladding were selected. The aim of the research project was to determine the extent to which a failure to adhere to technological procedures during facade construction can influence the effectiveness of the bonded joint. In construction practice, it is quite common during the implementation of a project that there are failures to comply with multiple requirements, or deviations from the prescribed procedures. For this reason, not only individual types of failure to comply with technological procedures were tested, but also their combinations. Altogether, 31 combinations of selected types of failure to comply with technological procedures were tested on one type of cladding. The adhesive joint was tested for shear strength and the adhesion of the adhesive to the substrate on a total of 352 samples. The results of the tests clearly confirm the hypothesis that failure to comply with technological procedures has a significant effect on the effectiveness of bonded joints. It is mainly the different combinations of failure to comply with technological procedures where the bonded joint loses effectiveness in the order of tens of percentage points.

Klíčová slova

Adhesion; Adhesive; Aluminum Alloy; Bonded; Ceramic Tile; Cohesion; Joint; Shear; Stress; Technological Procedures; Tensile

Autoři

LIŠKA, P.; NEČASOVÁ, B.; ŠLANHOF, J.

Vydáno

24. 12. 2018

Nakladatel

Springer Nature

Místo

London

ISSN

2196-4351

Periodikum

Applied Adhesion Science

Ročník

6

Číslo

1

Stát

Spojené království Velké Británie a Severního Irska

Strany od

1

Strany do

20

Strany počet

20

URL

http://link.springer.com/article/10.1186/s40563-018-0114-3

Plný text v Digitální knihovně

http://hdl.handle.net/11012/137380

BibTex

@article{BUT151622,
  author="Pavel {Liška} and Barbora {Nečasová} and Jiří {Šlanhof}",
  title="Influence of Technological Procedures on Mechanical Properties of Bonded Joint",
  journal="Applied Adhesion Science",
  year="2018",
  volume="6",
  number="1",
  pages="1--20",
  doi="10.1186/s40563-018-0114-3",
  issn="2196-4351",
  url="http://link.springer.com/article/10.1186/s40563-018-0114-3"
}