Detail publikace

The influence of the addition of gypsum on some selected properties of lime-metakaolin mortars

MAJEROVÁ, J DROCHYTKA, R.

Originální název

The influence of the addition of gypsum on some selected properties of lime-metakaolin mortars

Typ

článek ve sborníku ve WoS nebo Scopus

Jazyk

angličtina

Originální abstrakt

The renovation and replacement of historical plasters is still a very current topic. Today’s trend is for the production of dry mortar mixtures that can be used for the renovation of historic buildings. The article therefore focuses on the preparation of gypsum-modified lime-metakaolin mortar. An experiment consisted of two stages. In the first stage of the experiment, the basic technological properties of fresh and hardened mortars were examined (bulk density of fresh and hardener mortar, compressive and flexural strength). The second stage aimed at monitoring the hydration process in different environments. Environments should simulate real factors affecting the plaster (humidity, low and higher temperatures). To determinate of the phase composition, the X-ray diffraction analysis was used. The results showed that gypsum in the lime-metakaolin plaster caused an increase in compressive and flexural strength. The presence of gypsum also conduced to the formation of ettringite and this has caused volumetric changes.

Klíčová slova

Historic mortar, metakaolin, lime, gypsum, ettringite

Autoři

MAJEROVÁ, J; DROCHYTKA, R.

Vydáno

16. 7. 2018

Nakladatel

IOP Publishing

Místo

United Kingdoms

ISSN

1757-899X

Periodikum

IOP Conference Series: Materials Science and Engineering

Ročník

385

Číslo

1

Stát

Spojené království Velké Británie a Severního Irska

Strany od

1

Strany do

6

Strany počet

6

URL

Plný text v Digitální knihovně

BibTex

@inproceedings{BUT149558,
  author="Jana {Majerová} and Rostislav {Drochytka}",
  title="The influence of the addition of gypsum on some selected properties of lime-metakaolin mortars",
  booktitle="Construmat 2018",
  year="2018",
  series="2018",
  journal="IOP Conference Series: Materials Science and Engineering",
  volume="385",
  number="1",
  pages="1--6",
  publisher="IOP Publishing",
  address="United Kingdoms",
  doi="10.1088/1757-899X/385/1/012034",
  issn="1757-899X",
  url="http://iopscience.iop.org/article/10.1088/1757-899X/385/1/012034"
}