Detail publikace

Fibre optic gyroscope with single-mode fibre and loop-back phase shift compensation

Originální název

Fibre optic gyroscope with single-mode fibre and loop-back phase shift compensation

Anglický název

Fibre optic gyroscope with single-mode fibre and loop-back phase shift compensation

Jazyk

en

Originální abstrakt

An all-fibre optical sensor of an angular velocity (fibre-optic gyroscope) based on the Sagnac interferometer and using a loop-back phase shift compensation is presented. The sensing loop consists of 760 metres of an ordinary single-mode fibre, which makes this setup cost-effective. To ensure principles of beams reciprocity, randomly induced changes of polarization in the fibre are reduced by using an unpolarized light. This is achieved by a fibre Lyot depolarizer and a super fluorescent fibre source consisting of an erbium-doped fibre pumped by a laser diode. Unlike common approaches to the unpolarized fibre-optic gyroscope with a single-mode fibre, whose output is naturally nonlinear, we use a loop-back compensation of a rotation-induced phase shift to achieve a linear response. In most cases, this technique requires fast electro-optical modulator, which is compatible only with an expensive polarization-maintaining fibre. We use a novel loop-back modulation scheme utilizing only harmonic signals and thus compatible with a piezoelectric fibre stretcher, which can be used with any kind of optical fibre. As result of the closed-loop operation, the range of the gyroscope's linearity is greatly increased and a sensitivity to source power changes is suppressed. We describe the gyroscope setup with proposed modulation method and provide a comparison to the common open-loop setup.

Anglický abstrakt

An all-fibre optical sensor of an angular velocity (fibre-optic gyroscope) based on the Sagnac interferometer and using a loop-back phase shift compensation is presented. The sensing loop consists of 760 metres of an ordinary single-mode fibre, which makes this setup cost-effective. To ensure principles of beams reciprocity, randomly induced changes of polarization in the fibre are reduced by using an unpolarized light. This is achieved by a fibre Lyot depolarizer and a super fluorescent fibre source consisting of an erbium-doped fibre pumped by a laser diode. Unlike common approaches to the unpolarized fibre-optic gyroscope with a single-mode fibre, whose output is naturally nonlinear, we use a loop-back compensation of a rotation-induced phase shift to achieve a linear response. In most cases, this technique requires fast electro-optical modulator, which is compatible only with an expensive polarization-maintaining fibre. We use a novel loop-back modulation scheme utilizing only harmonic signals and thus compatible with a piezoelectric fibre stretcher, which can be used with any kind of optical fibre. As result of the closed-loop operation, the range of the gyroscope's linearity is greatly increased and a sensitivity to source power changes is suppressed. We describe the gyroscope setup with proposed modulation method and provide a comparison to the common open-loop setup.

BibTex


@inproceedings{BUT144021,
  author="Michal {Skalský} and Zdeněk {Havránek} and Jiří {Fialka}",
  title="Fibre optic gyroscope with single-mode fibre and loop-back phase shift compensation",
  annote="An all-fibre optical sensor of an angular velocity (fibre-optic gyroscope) based on the Sagnac interferometer and using a loop-back phase shift compensation is presented. The sensing loop consists of 760 metres of an ordinary single-mode fibre, which makes this setup cost-effective. To ensure principles of beams reciprocity, randomly induced changes of polarization in the fibre are reduced by using an unpolarized light. This is achieved by a fibre Lyot depolarizer and a super fluorescent fibre source consisting of an erbium-doped fibre pumped by a laser diode. Unlike common approaches to the unpolarized fibre-optic gyroscope with a single-mode fibre, whose output is naturally nonlinear, we use a loop-back compensation of a rotation-induced phase shift to achieve a linear response. In most cases, this technique requires fast electro-optical modulator, which is compatible only with an expensive polarization-maintaining fibre. We use a novel loop-back modulation scheme utilizing only harmonic signals and thus compatible with a piezoelectric fibre stretcher, which can be used with any kind of optical fibre. As result of the closed-loop operation, the range of the gyroscope's linearity is greatly increased and a sensitivity to source power changes is suppressed. We describe the gyroscope setup with proposed modulation method and provide a comparison to the common open-loop setup.",
  address="SPIE",
  booktitle="Proceedings of SPIE",
  chapter="144021",
  doi="10.1117/12.2292298",
  edition="Photonics, Devices, and Systems VII.",
  howpublished="online",
  institution="SPIE",
  year="2017",
  month="december",
  pages="1--6",
  publisher="SPIE",
  type="conference paper"
}