Detail publikace

Effect of curing regime on the properties of alkali-activated slag/limestone mortar subjected to high temperatures

ROVNANÍK, P. FIALOVÁ, B.

Originální název

Effect of curing regime on the properties of alkali-activated slag/limestone mortar subjected to high temperatures

Typ

článek ve sborníku ve WoS nebo Scopus

Jazyk

angličtina

Originální abstrakt

Alkali-activated slag is a material which was proved to have a higher resistance against high temperature loading than materials based on ordinary Portland cement. In spite of this fact it also undergoes partial decomposition followed by the deterioration of the mechanical properties. This paper investigates the effect of various curing regimes applied to the samples which were exposed to temperature 200–1200 °C on the mechanical properties and microstructure of the alkali-activated slag/limestone blends. The amount of limestone was 15% from the mass of slag. On set of specimens was treated on air at laboratory conditions, the second set was immersed in water and the last was treated stored in humid chamber with 95% relative humidity for the period of 60 days. The results showed that water curing has a strong positive influence on the compressive as well as flexural strength of the specimens exposed to temperatures up to 600 °C. Specimens which were exposed to 800 and 1000 °C showed the best performance after treatment in humid chamber, and after exposure to 1200 °C the best compressive strength exhibited the air cured samples.

Klíčová slova

alkali-activation; slag; limestone; high temperature; curing; mechanical properties; microstructure

Autoři

ROVNANÍK, P.; FIALOVÁ, B.

Vydáno

11. 8. 2016

Nakladatel

Trans Tech Publications

Místo

Switzerland

ISBN

9783038357407

Kniha

14th International Conference Silicate Binders, ICBM 2015

ISSN

0255-5476

Periodikum

Materials Science Forum

Ročník

865

Číslo

1

Stát

Švýcarská konfederace

Strany od

37

Strany do

41

Strany počet

5

URL

BibTex

@inproceedings{BUT128933,
  author="Pavel {Rovnaník} and Barbora {Fialová}",
  title="Effect of curing regime on the properties of alkali-activated slag/limestone mortar subjected to high temperatures",
  booktitle="14th International Conference Silicate Binders, ICBM 2015",
  year="2016",
  journal="Materials Science Forum",
  volume="865",
  number="1",
  pages="37--41",
  publisher="Trans Tech Publications",
  address="Switzerland",
  doi="10.4028/www.scientific.net/MSF.865.37",
  isbn="9783038357407",
  issn="0255-5476",
  url="http://www.scientific.net/MSF.865.37"
}