Ing.

Jan Zouhar

Ph.D.

FSI, ÚST – ředitel ústavu

+420 54114 2523
zouhar@fme.vutbr.cz

Odeslat VUT zprávu

Ing. Jan Zouhar, Ph.D.

Publikace

  • 2023

    VILIŠ, J.; NEUMANN, V.; VÍTEK,R.; ZOUHAR, J.; POKORNÝ, Z.; MAREK, M. Analysis of Ballistic Impact of 7.62 mm FMJ M80 Rifle Projectile into Twaron/UHMWPE Composite Armor. Journal of Composites Science, 2023, roč. 7, č. 9, ISSN: 2504-477X.
    Detail | WWW | Plný text v Digitální knihovně

    VILIŠ, J.; VÍTEK, R.; ZOUHAR, J.; STEJSKAL, M.; NEUMANN, V. Experimental Investigation of Armour (Armox-Aramid-UHMWPE). Manufacturing TECHNOLOGY, 2023, roč. 23, č. 6, s. 935-948. ISSN: 1213-2489.
    Detail | WWW

    ZEMČÍK, O.; SLANÝ, M.; SEDLÁK, J.; ZOUHAR, J.; KOLOMÝ, Š.; KOUŘIL, K. Machinability of UMCo50 Cobalt Superalloy. Manufacturing TECHNOLOGY, 2023, roč. 23, č. 6, s. 1-13. ISSN: 1213-2489.
    Detail | WWW

    BARÉNYI, I.; SLANÝ, M.; KOUŘIL, K.; ZOUHAR, J.; KOLOMÝ, Š.; SEDLÁK, J.; MAJERÍK, J. Processing of Bimetallic Inconel 625-16Mo3 Steel Tube via Supercritical Bend: Study of the Mechanical Properties and Structure. Materials, 2023, roč. 16, č. 20, ISSN: 1996-1944.
    Detail | WWW | Plný text v Digitální knihovně

    KOLOMÝ, Š.; SEDLÁK, J.; ZOUHAR, J.; SLANÝ, M.; BENČ, M.; DOBROCKÝ, D.; BARÉNYI, I.; MAJERÍK, J. Influence of Aging Temperature on Mechanical Properties and Structure of M300 Maraging Steel Produced by Selective Laser Melting. Materials, 2023, roč. 16, č. 3, s. 1-18. ISSN: 1996-1944.
    Detail | WWW | Plný text v Digitální knihovně

    DRBAL, M.; KOLOMÝ, Š.; ZOUHAR, J.; SEDLÁK, J.; VÍTEK, J. STUDY OF THE WEAR DEVELOPMENT OF REPLACEABLE CUTTING INSERTS FOR PARTING. Vrstvy a povlaky 2023. M-PRESS s.r.o., 2023. s. 15-19. ISBN: 978-80-972133-6-7.
    Detail | WWW

    SEDLÁK, J.; JOSKA, Z.; JÁNSKÝ, J.; ZOUHAR, J.; KOLOMÝ, Š.; SLANÝ, M.; ŠVÁSTA, A.; JIROUŠEK, J. Analysis of the Mechanical Properties of 3D-Printed Plastic Samples Subjected to Selected Degradation Effects. Materials, 2023, roč. 16, č. 8, s. 1-19. ISSN: 1996-1944.
    Detail | WWW | Plný text v Digitální knihovně

    KOLOMÝ, Š.; SEDLÁK, J.; ZOUHAR, J.; SLANÝ, M. Study of mechanical properties and structure of 3D printed maraging steel. In Proceeding of Abstracts MATEDAS 2023. 2023. Brno: Univerzita obrany, Brno, 2023. s. 1-3. ISBN: 978-80-7582-244-4.
    Detail | WWW

    CHRÁST, D.; SLANÝ, M.; SEDLÁK, J.; ZOUHAR, J.; KOLOMÝ, Š.; ZEMČÍK, O. The Analysis of Surfacing Welds of Inconel 625. In Proceedings of Abstracts MATEDAS 2023. 2023. Brno: Univerzita obrany, Brno, 2023. s. 110-113. ISBN: 978-80-7582-244-4.
    Detail | WWW

    KUPČÁK, R.; ZOUHAR, J.; VILIŠ, J.; GREGOR, L.; HRUŠECKÁ, D. Precision and Dimensional Stability of Bonded Joints of Carbon-Fibre-Reinforced Polymers Parts. Applied Sciences - Basel, 2023, roč. 13, č. 18, ISSN: 2076-3417.
    Detail | WWW | Plný text v Digitální knihovně

    KUPČÁK, R.; ZOUHAR, J.; GREGOR, L. Precision and Dimensional Stability of Bonded Joints of CFRP Parts. Polymer Composites 2023 - proceedings. First. Prague: Czech Technical University in Prague, 2023. s. 28-33. ISBN: 978-80-01-07151-9.
    Detail

    SEDLÁK, J.; ZOUHAR, J.; KOLOMÝ, Š.; SLANÝ, M.; NEČESÁNEK, E. Effect of high-speed steel screw drill geometry on cutting performance when machining austenitic stainless steel. Scientific Reports, 2023, roč. 13, č. 1, s. 1-13. ISSN: 2045-2322.
    Detail | WWW | Plný text v Digitální knihovně

    MAJERÍK, J.; SLANÝ, M.; CHOCHLIKOVA, H.; SEDLÁK, J.; ZOUHAR, J.; ZEMČÍK, O.; BARÉNYI, I.; KOLOMÝ, Š.; ESCHEROVA, J. Analysis of the technological process of welding a membrane wall with Inconel 625 nickel alloy. International Journal of Advanced Manufacturing Technology, 2023, roč. 127, č. 6, s. 3031-3048. ISSN: 1433-3015.
    Detail | WWW

    KOLOMÝ, Š.; DRBAL, M.; SEDLÁK, J.; ZOUHAR, J.; VÍTEK, J. TRENDS IN TESTING OF CUTTING COATINGS, EXPERIMENTAL AND PRACTICAL EXPERIENCES. Vrstvy a povlaky 2023. M-PRESS s.r.o., 2023. s. 33-38. ISBN: 978-80-972133-6-7.
    Detail | WWW

  • 2022

    OSIČKA, K.; ZOUHAR, J.; SLIWKOVÁ, P.; CHLADIL, J. Cutting Force When Machining Hardened Steel and the Surface Roughness Achieved. Applied Sciences - Basel, 2022, roč. 12, č. 22, ISSN: 2076-3417.
    Detail | WWW | Plný text v Digitální knihovně

    ZEMČÍK, O.; SLANÝ, M.; ZOUHAR, J.; SEDLÁK, J. Simulation of supercritical bending of cladded pipes. Experimental Stress Analysis 2022 Book of Extended Abstracts. 1. Prague: Czech Technical University in Prague, Faculty of Mechanical Engineering, Department of Mechanics, Biomechanics and Mechatronics, Technická 4, 160 00 Prague 6, 2022. s. 146-147. ISBN: 978-80-01-07010-9.
    Detail

    ZOUHAR, J.; GABRIŠ, A.; JOPEK, M.; PODANÝ, K. Determination of the Johnson-Cook Material Model of EN AW 6061-T6511 with evaluation for grooving machining. Experimental Stress Analysis 2022 Book of Extended Abstract. first. Prague: Czech Technical University in Prague, Faculty of Mechanical Engineering, Department of Mechanics, Biomechanics and Mechatronics, Technická 4, 160 00 Prague 6, 2022. s. 152-153. ISBN: 978-80-01-07010-9.
    Detail

    DOBROCKÝ, D.; POKORNÝ, Z.; JOSKA, Z.; SEDLÁK, J.; ZOUHAR, J.; MAJERÍK, J.; STUDENÝ, Z.; PROCHÁZKA, J.; BARÉNYI, I. Change in Dimensions and Surface Roughness of 42CrMo4 Steel after Nitridation in Plasma and Gas. Coatings, MDPI, 2022, roč. 12, č. 10, ISSN: 2079-6412.
    Detail | WWW | Plný text v Digitální knihovně

    VILIŠ, J.; POKORNÝ, Z.; ZOUHAR, J.; JOPEK, M. Ballistic Resistance of Composite Materials Tested by Taylor Anvil Test. Manufacturing TECHNOLOGY, 2022, roč. 22, č. 5, ISSN: 1213-2489.
    Detail | WWW

    KUBÍČEK, J.; ZOUHAR, J.; SLANÝ, M.; HRÁDEK, J. Navařování membránové stěny niklovou slitinou Inconel 625. Zváranie - Svařování, 2022, roč. 2021, č. 4, s. 18-21. ISSN: 0044-5525.
    Detail | WWW

    VILIŠ, J.; POKORNÝ, Z.; ZOUHAR, J.; VÍTEK, R.; PROCHÁZKA, J. Evaluation of ballistic resistance of thermoplastic and thermoset composite panels. In Journal of Physics: Conference Series. Journal of Physics: Conference Series. 1. Bristol: IOP Publishing, 2022. ISSN: 1742-6596.
    Detail | WWW

    VILIŠ, J.; POKORNÝ, Z.; ZOUHAR, J. Testing the ballistic resistance of composite materials. In Proceedings 31st International Conference on Metallurgy and Materials. 28th International Conference on Metallurgy and Materials. 1. Brno: Tanger ltd., 2022. s. 656-661. ISBN: 978-80-88365-06-8. ISSN: 2694-9296.
    Detail | WWW

    ZOUHAR, J.; SLANÝ, M.; SEDLÁK, J.; JOSKA, Z.; POKORNÝ, Z.; BARÉNYI, I.; MAJERÍK, J.; FIALA, Z. Application of Carbon–Flax Hybrid Composite in High Performance Electric Personal Watercraft. Polymers, 2022, roč. 14, č. 9, s. 1-17. ISSN: 2073-4360.
    Detail | WWW | Plný text v Digitální knihovně

  • 2021

    GREGOR, L.; ZOUHAR, J.; MÍŠA, J.; KUPČÁK, R.; SEDLÁK, J. Design and validation of motorcycle single side swingarm made of CFRP using photogrammetry. Polymer Composites 2021 - Proceedings. First. Prague: Czech technical University in Prague, 2021. s. 12-17. ISBN: 978-80-01-06897-7.
    Detail

    KUPČÁK, R.; ZOUHAR, J.; GREGOR, L. Precision Bonding of CFRP Parts With Application In Sport Optics. Polymer Composites 2021 - Proceedings. First. Prague: Czech Technical University in Prague, 2021. s. 29-34. ISBN: 978-80-01-06897-7.
    Detail

    ZOUHAR, J.; FIALA, Z.; JOSKA, Z. Mechanical Properties of Flax and Hybrid Composite Materals. Polymer Composites 2021 - Proceedings. First. Prague: Czech technical University in Prague, 2021. s. 74-79. ISBN: 978-80-01-06897-7.
    Detail

    SLANÝ, M.; SEDLÁK, J.; ZOUHAR, J.; ZEMČÍK, O.; KOUŘIL, K.; POLZER, A.; POKORNÝ, Z.; JOSKA, Z.; DOBROCKÝ, D.; STUDENÝ, Z. Analysis of bimetal pipe bends with a bend of 0.7D with a cladding layer of Inconel 625. International Journal of Advanced Manufacturing Technology, 2021, roč. 117, č. 11-12, s. 3859-3871. ISSN: 1433-3015.
    Detail | WWW

    SLANÝ, M.; SEDLÁK, J.; ZOUHAR, J.; ZEMČÍK, O.; CHLADIL, J.; JAROŠ, A.; KOUŘIL, K.; VARHANÍK, M.; MAJERÍK, J.; BARÉNYI, I.; ČEP, R. Material and Dimensional Analysis of Bimetallic Pipe Bend with Defined Bending Radii. TEHNIČKI VJESNIK - TECHNICAL GAZETTE, 2021, roč. 28, č. 3, s. 974-982. ISSN: 1330-3651.
    Detail | WWW | Plný text v Digitální knihovně

    ZOUHAR, J.; SLANÝ, M.; SEDLÁK, J.; JOSKA, Z.; POKORNÝ, Z.; BARÉNYI, I.; MAJERÍK, J.; POLZER, A. APPLICATION OF FLAX HYBRID COMPOSITE ON THE HIGH PERFORMANCE ELECTRIC PERSONAL WATERCRAFT. BOOK OF ABSTRACTS. 2021. Braga: SCIENCENTRIS, 2021. s. 391-392. ISBN: 978-989-54808-5-2.
    Detail | WWW

  • 2020

    GREGOR, L.; ZOUHAR, J.; KUPČÁK, R.; VARHANÍK, M.; SEDLÁK, J. Design and stiffness Distribution analysis of motorcycle swingarm made of carbon fiber composites. In ENGINEERING MECHANICS 2020. 2020. Brno: Brno University of Technology, 2020. s. 162-165. ISBN: 978-80-214-5896-3.
    Detail | WWW

    KUPČÁK, R.; ZOUHAR, J. Application of composite materials in sports optics. Manufacturing TECHNOLOGY, 2020, roč. 20, č. 2, s. 200-209. ISSN: 1213-2489.
    Detail | WWW | Plný text v Digitální knihovně

  • 2019

    KUPČÁK, R.; ZOUHAR, J.; JANDA, J. Application of composite materials in sports optics. In TRANSFER 2019. 2019. Trenčín: Trenčianska univerzita Alexandra Dubčeka v Trenčíně, 2019. s. 105-116. ISBN: 978-80-8075-889-9.
    Detail | WWW

    SLANÝ, M.; SEDLÁK, J.; ZOUHAR, J.; ZEMČÍK, O.; CHLADIL, J.; JAROŠ, A.; KOUŘIL, K.; VARHANÍK, M.; MAJERÍK, J.; BARÉNYI, I. Material and Dimensional Analysis of Bimetallic Pipe Bend with Defined Bending Radii. In TRANSFER 2019. 2019. Trenčín: Trenčianska univerzita Alexandra Dubčeka v Trenčíně, 2019. s. 181-199. ISBN: 978-80-8075-889-9.
    Detail | WWW

  • 2013

    SEDLÁK, J.; PTÁČKOVÁ, M.; NEJEDLÝ, J.; MADAJ, M.; DVOŘÁČEK, J.; ZOUHAR, J.; CHARVÁT, O.; PÍŠKA, M. MATERIAL ANALYSIS OF TITANIUM ALLOY PRODUCED BY DIRECT METAL LASER SINTERING. International Journal of Metalcasting, 2013, roč. 7, č. 2, s. 43-50. ISSN: 1939- 5981.
    Detail

  • 2011

    ZOUHAR, J.; MADAJ, M.; SEDLÁK, J.; POLZER, A. FEM Machining Simulation Using LS- DYNA. In The International Conference NEWTECH 2011 on Advanced Manufacturing Engineering. 1. Brno: LITERA BRNO, 2011. s. 121-126. ISBN: 978-80-214-4267- 2.
    Detail

    SEDLÁK, J.; ŘÍČAN, D.; NEJEDLÝ, J.; PTÁČKOVÁ, M.; ZOUHAR, J.; SLANÝ, M. Comparison of materials produced by classical and modern additive (DMLS method) powder metallurgy. In The International Conference NEWTECH 2011 on Advanced Manufacturing Engineering. 1. Brno: LITERA BRNO, 2011. s. 205-210. ISBN: 978-80-214-4267-2.
    Detail

  • 2010

    SEDLÁK, J.; PÍŠKA, M.; PTÁČKOVÁ, M.; MADAJ, M.; CHARVÁT, O.; DVOŘÁČEK, J.; ZOUHAR, J. PROPERTIES OF THE BIOCOMPATIBLE TiAl6V4 MATERIAL PRODUCED BY DMLS. International virtual journal for science, technics and innovations for the industry, 2010, roč. 2010, č. 4- 5, s. 74-77. ISSN: 1313- 0226.
    Detail

    DVOŘÁČEK, J.; POLZER, A.; ZOUHAR, J.; SEDLÁK, J.; PÍŠKA, M. On the Application of the PVD Hard Coatings for Ball Milling of Shaped Surfaces. Internet Journal of Engineering and Technology, 2010, roč. 1, č. 1, s. 11-18. ISSN: 1338- 2357.
    Detail

  • 2009

    PÍŠKA, M.; ZOUHAR, J.; POLZER, A. Precise Shoulder Milling with an Optimised 4-axis CNC- Toolpath Generation. Technologies in Machine Building, 2009, roč. XXVII, č. 2009, s. 165-168. ISSN: 1221- 4566.
    Detail

    PÍŠKA, M.; ZOUHAR, J.; POLZER, A. Stress- strain analysis of end milling HSS cutters reflecting the wear process. CIRP Annual Meeting 2009. 2009-01-29/5. 3. Paříž, Francie: CIRP, 2009. s. 1-6.
    Detail

    PÍŠKA, M.; ZOUHAR, J.; POLZER, A. On the precise shoulder milling with an optimized 4- axis CNC machining. In Moderní výrobní technologie pro 21. století. 1. Brno: CERM, 2009. s. 43-47. ISBN: 978-80-214-3914- 6.
    Detail

  • 2008

    ZOUHAR, J.; PÍŠKA, M. Modelling of the Orthogonal Machining Process using Cutting Tools with Different Geometry. In MATAR PRAHA 2008, Part 2: Testing, Technology. 1. Praha: SMT - Society for Machine Tools, 2008. s. 81-86. ISBN: 978-80-904077-0- 1.
    Detail

    ZOUHAR, J.; PÍŠKA, M. Modelling the orthogonal machining process using cutting tools with different geometry. MM Science Journal, 2008, roč. 1, č. 4, s. 49-52. ISSN: 1803- 1269.
    Detail

    HADAŠ, Z.; ZOUHAR, J. APPLICATION OF RAPID PROTOTYPING METHOD FOR DEVELOPMENT OF MECHATRONIC SYSTEMS. In Engineering Mechanics 2008. 1. Prague: Institute of Termomechanics, Academy of Sciences of the Czech Republic, 2008. s. 80-81. ISBN: 978-80-87012-11- 6.
    Detail

    HADAŠ, Z.; ZOUHAR, J.; SINGULE, V.; ONDRŮŠEK, Č. Design of Energy Harvesting Generator Base on Rapid Prototyping Parts. In 2008 13th Power Electronics and Motion Control Conference. 1. Poznan, POLAND: 2008. s. 1688-1692. ISBN: 978-1-4244-1741- 4.
    Detail

    ZOUHAR, J.; POLZER, A.; CIHLÁŘOVÁ, P. Napjatostně- deformační analýza moderních řezných nástrojů. In FSI Junior konference. CD- ROM. Brno: Vysoké uční technické v Brně, FSI, 2008. s. 118-125. ISBN: 978-80-214-3565- 0.
    Detail

    ZOUHAR, J.; PÍŠKA, M. Analýza moderních HSS fréz. MM Průmyslové spektrum, 2008, roč. 2008, č. 3, s. 64-66. ISSN: 1212- 2572.
    Detail

    PÍŠKA, M.; ZOUHAR, J. Napjatostně- deformační analýza moderních HSS fréz. MM Průmyslové spektrum, 2008, roč. 2008, č. 3, s. 64-66. ISSN: 1212- 2572.
    Detail

    ZOUHAR, J.; PÍŠKA, M. Stress- strain analysis of modern end milling HSS cutters. In Transfer 2008. 1. Trenčín, SK: Digital graphic, 2008. s. 76-76. ISBN: 978-80-8075-357- 3.
    Detail

  • 2007

    SEDLÁK, J.; PROCHÁZKOVÁ, J.; PÍŠA, Z.; SEDLÁČEK, J.; ZOUHAR, J. PŘÍMÁ B- SPLINE INTERPOLACE DRÁHY CNC NÁSTROJE Z MRAKU BODŮ. In Frézování IV. Brno 2007: FSI, VUT v Brně, 2007. s. 147-154. ISBN: 80-214-3239- X.
    Detail

    ZOUHAR, J.; PÍŠA, Z.; SEDLÁK, J.; SEDLÁČEK, J. Produktivní obrábění s využitím metod reverzního inženýrství. In Frézování IV. Brno: FSI, VUT v Brně, 2007. s. 189-196. ISBN: 80-214-3239- X.
    Detail

    SEDLÁČEK, J.; SEDLÁK, J.; ZOUHAR, J. A FORCE PREDICTION MODEL AND CUTTING FORCES ANALYSIS WHEN MACHINING UNIDIRECTIONAL FRP. In FRÉZOVÁNÍ IV. Brno: FSI VUT v BRNĚ, 2007. s. 163-172. ISBN: 80-214-3239- X.
    Detail

    SEDLÁK, J.; SEDLÁČEK, J.; ZOUHAR, J. Rapid Prototyping přímé výroby keramických forem pomocí CAD/ CAM systémů a CNC technologie. In Brno: FSI VUT v Brně, 2007.
    Detail

  • 2006

    ZOUHAR, J. Engineering analysis in CAD systems. In LVEM. BUT. Brno: BUT, 2006. s. 286-292. ISBN: 80-214-3159- 8.
    Detail

*) Citace publikací se generují jednou za 24 hodin.