Detail publikace

Analysis of bimetal pipe bends with a bend of 0.7D with a cladding layer of Inconel 625

SLANÝ, M. SEDLÁK, J. ZOUHAR, J. ZEMČÍK, O. KOUŘIL, K. POLZER, A. POKORNÝ, Z. JOSKA, Z. DOBROCKÝ, D. STUDENÝ, Z.

Originální název

Analysis of bimetal pipe bends with a bend of 0.7D with a cladding layer of Inconel 625

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

Bimetal pipes are highly stressed composite components that must resist corrosion in a chemically aggressive environment. They are made by welding resistive material to commonly available carbon steel pipes. The production of pipe bends with a supercritical bend of 0.7D, which are part of serpentine systems, is very complex and technologically demanding because very often undesired cracks occur. To increase the service life of these serpentine systems, the use of a 16Mo3 base steel pipe with a cladding layer of Inconel 625 material was proposed for their production in order to significantly increase their corrosion resistance. For this reason, an extensive analysis of the production of pipe bends with a supercritical bend of 0.7D from bimetal pipes with Inconel 625 cladding was performed, which addressed not only the bend but also the mechanical properties of the pipe with Inconel 625 cladding. It was found that the production of the bent pipes with a bend of 0.7D is feasible completely without defects with perfectly satisfactory mechanical properties, under appropriate technological conditions.

Klíčová slova

Bimetal pipes; Pipe bend; Steel 16Mo3; Inconel 625; Cladding

Autoři

SLANÝ, M.; SEDLÁK, J.; ZOUHAR, J.; ZEMČÍK, O.; KOUŘIL, K.; POLZER, A.; POKORNÝ, Z.; JOSKA, Z.; DOBROCKÝ, D.; STUDENÝ, Z.

Vydáno

26. 8. 2021

Nakladatel

SPRINGER LONDON LTD

Místo

LONDON

ISSN

1433-3015

Periodikum

International Journal of Advanced Manufacturing Technology

Ročník

117

Číslo

11-12

Stát

Spojené království Velké Británie a Severního Irska

Strany od

3859

Strany do

3871

Strany počet

13

URL

https://link.springer.com/article/10.1007/s00170-021-07749-1

BibTex

@article{BUT173068,
  author="Martin {Slaný} and Josef {Sedlák} and Jan {Zouhar} and Oskar {Zemčík} and Karel {Kouřil} and Aleš {Polzer} and Zdeněk {Pokorný} and Zdeněk {Joska} and David {Dobrocký} and Zbyněk {Studený}",
  title="Analysis of bimetal pipe bends with a bend of 0.7D with a cladding layer of Inconel 625",
  journal="International Journal of Advanced Manufacturing Technology",
  year="2021",
  volume="117",
  number="11-12",
  pages="3859--3871",
  doi="10.1007/s00170-021-07749-1",
  issn="1433-3015",
  url="https://link.springer.com/article/10.1007/s00170-021-07749-1"
}