Detail publikace

Analysis of Machinability of Pure-Cobalt Disc for Magnetron Deposition Using WEDM

MOURALOVÁ, K. KOVÁŘ, J. ZAHRADNÍČEK, R. HOLUB, M.

Originální název

Analysis of Machinability of Pure-Cobalt Disc for Magnetron Deposition Using WEDM

Typ

článek ve sborníku ve WoS nebo Scopus

Jazyk

angličtina

Originální abstrakt

Cobalt layers prepared by magnetron sputtering are investigated because of their ferromagnetic properties at room temperature for a potential increase in capacity and speed of current memory media. Deposition of magnetically active material is limited by maximum thickness of the used cobalt disc, which was, in this case, set to 3 mm by the device manufacturer. However, the purchased disc had a thickness of 4.3 mm and therefore it was not possible to perform a deposition. For the purpose of halving, we selected an unconventional technology of WEDM, which does not use mechanical energy for material cutting; due to this technology, the workpiece is not affected by mechanical forces. After successful halving of disc, the morphology of machined surface was analyzed using electron microscopy, and subsequently, a detailed analysis of chemical composition (EDX) was performed in several locations on the sample. Next, the topography was examined and the profile and surface parameters of quality of machined surface were evaluated including a 3D colour-filtered surface image.

Klíčová slova

WEDM, electrical discharge machining, pure cobalt, topography of surface, morphology, EDX

Autoři

MOURALOVÁ, K.; KOVÁŘ, J.; ZAHRADNÍČEK, R.; HOLUB, M.

Vydáno

1. 1. 2018

Nakladatel

Springer, Cham

Místo

Brno

ISBN

978-3-319-65959-6

Kniha

Mechatronics 2017, Advances in Intelligent Systems and Computing

Číslo edice

644

ISSN

2194-5357

Periodikum

Advances in Intelligent Systems and Computing

Ročník

644

Stát

Švýcarská konfederace

Strany od

141

Strany do

148

Strany počet

8

URL

https://link.springer.com/chapter/10.1007/978-3-319-65960-2_19

BibTex

@inproceedings{BUT138576,
  author="Kateřina {Mouralová} and Jiří {Kovář} and Radim {Zahradníček} and Michal {Holub}",
  title="Analysis of Machinability of Pure-Cobalt Disc for Magnetron Deposition Using WEDM",
  booktitle="Mechatronics 2017,  Advances in Intelligent Systems and Computing",
  year="2018",
  journal="Advances in Intelligent Systems and Computing",
  volume="644",
  number="644",
  pages="141--148",
  publisher="Springer, Cham",
  address="Brno",
  doi="10.1007/978-3-319-65960-2\{_}19",
  isbn="978-3-319-65959-6",
  issn="2194-5357",
  url="https://link.springer.com/chapter/10.1007/978-3-319-65960-2_19"
}