Detail publikace

Stanovení optimální teploty tváření ložiskové oceli 100CrMo7-3 za poloohřevu

KLAKURKOVÁ, L. DOLEŽAL, P. ZAPLETAL, J. ŠVEJCAR, J.

Originální název

Stanovení optimální teploty tváření ložiskové oceli 100CrMo7-3 za poloohřevu

Anglický název

Estabilishing optimum forming temperature of 100CrMo7-3 bearing steel under partial heating

Typ

článek v časopise - ostatní, Jost

Jazyk

čeština

Originální abstrakt

The paper is concerned with problems of optimizing the temperature of forming grade 100CrMo7-3 bearing steel under partial heating. Experimental extablishment of the optimum range of forming temperatures was based on the results of tensile testing at elevated temperatures from 100 to 800oC. Experimental verification of the behavior of bearing steel under pressure was conducted via the upsetting test at elevated temperatures. The experimental part of the work is also concerned with the analysis of phase composition of hrade 100CrMo7-3 bearing steel using computer simulation, and by the verification of simulation via metallographic evaluation.

Anglický abstrakt

The paper is concerned with problems of optimizing the temperature of forming grade 100CrMo7-3 bearing steel under partial heating. Experimental extablishment of the optimum range of forming temperatures was based on the results of tensile testing at elevated temperatures from 100 to 800oC. Experimental verification of the behavior of bearing steel under pressure was conducted via the upsetting test at elevated temperatures. The experimental part of the work is also concerned with the analysis of phase composition of hrade 100CrMo7-3 bearing steel using computer simulation, and by the verification of simulation via metallographic evaluation.

Klíčová slova

100CrMo7-3; bearing stee;l forming temperature; partial heating

Klíčová slova v angličtině

100CrMo7-3; bearing stee;l forming temperature; partial heating

Autoři

KLAKURKOVÁ, L.; DOLEŽAL, P.; ZAPLETAL, J.; ŠVEJCAR, J.

Rok RIV

2008

Vydáno

22. 10. 2008

Nakladatel

Politechnika Opolska

Místo

Opole

ISSN

1429-6055

Periodikum

Zeszyty naukowe politechniki Opolskiej seria Mechanika

Ročník

2008

Číslo

327

Stát

Polská republika

Strany od

207

Strany do

212

Strany počet

6

BibTex

@article{BUT47331,
  author="Lenka {Klakurková} and Pavel {Doležal} and Josef {Zapletal} and Jiří {Švejcar}",
  title="Stanovení optimální teploty tváření ložiskové oceli 100CrMo7-3 za poloohřevu",
  journal="Zeszyty naukowe politechniki Opolskiej seria Mechanika",
  year="2008",
  volume="2008",
  number="327",
  pages="207--212",
  issn="1429-6055"
}