Detail publikace

Biodegradable composite materials based on poly(3 hydroxybutyrate) for 3D printing applications

MENČÍK, P. MELČOVÁ, V. KONTÁROVÁ, S. PŘIKRYL, R. PERĎOCHOVÁ, D. REPISKÁ, M.

Originální název

Biodegradable composite materials based on poly(3 hydroxybutyrate) for 3D printing applications

Typ

článek v časopise ve Scopus, Jsc

Jazyk

angličtina

Originální abstrakt

Presented work deals with the development of bio-source and biodegradable composite material for 3D printing. Polymer blend based on poly(3-hydroxybutyrate) (60 wt%) and poly(lactic acid) (25 wt%) plasticized with tributyl citrate (15 wt%) was used as a matrix. This base blend was filled with 10 vol% of kaolin or limestone. Zinc stearate was used for the surface treatment of the limestone samples. The mechanical and thermal properties of the composites, as well as their behavior during 3D printing process, were compared with unfilled blend and commercial poly(lactic acid) based 3D printing filament. Warping behavior, one of the main problems of 3D printing materials, was studied by means of warp coefficient. Cross-sections of specimens 3D printed under the same processing conditions were observed by the optical microscope. In the case of composite samples, individual filaments were separated. Despite the separation, composites filled with kaolin and with surface treated limestone exhibited satisfying mechanical properties. Scanning electron microscopy analysis confirmed good particle distribution of the samples with kaolin and surface treated limestone. No significant particle agglomerates were formed in the composites with limestone proving good dispersion ability of zinc stearate. Thermogravimetric analysis and Differential scanning calorimetry analysis showed no degradation effect of the used fillers on base polymer matrix. Observed results indicate that kaolin and surface treated limestone are suitable fillers for the bio-source composites used for 3D printing.

Klíčová slova

Poly(3-hydroxybutyrate), Kaolin, Limestone, Bio-composite, 3D print

Autoři

MENČÍK, P.; MELČOVÁ, V.; KONTÁROVÁ, S.; PŘIKRYL, R.; PERĎOCHOVÁ, D.; REPISKÁ, M.

Vydáno

4. 1. 2019

Nakladatel

Scientific.net

ISSN

1662-9752

Periodikum

Materials Science Forum

Číslo

955

Stát

Švýcarská konfederace

Strany od

56

Strany do

61

Strany počet

6

URL

BibTex

@article{BUT152034,
  author="MENČÍK, P. and MELČOVÁ, V. and KONTÁROVÁ, S. and PŘIKRYL, R. and PERĎOCHOVÁ, D. and REPISKÁ, M.",
  title="Biodegradable composite materials based on poly(3 hydroxybutyrate) for 3D printing applications",
  journal="Materials Science Forum",
  year="2019",
  number="955",
  pages="56--61",
  doi="10.4028/www.scientific.net/MSF.955.56",
  issn="1662-9752",
  url="https://www.scientific.net/MSF.955.56"
}