Detail publikace

Issue of epoxy based coatings system crystallization and effect of partial crystallinity on mechanical parameters

VYHNÁNKOVÁ, M. HODUL, J. BYDŽOVSKÝ, J.

Originální název

Issue of epoxy based coatings system crystallization and effect of partial crystallinity on mechanical parameters

Typ

článek ve sborníku ve WoS nebo Scopus

Jazyk

angličtina

Originální abstrakt

Crystallization of bisphenol A-based and bisphenol F-based epoxy resins is the common property of these oligomers. However, producers of paints, coatings and other systems based on these epoxy resins are making efforts to slow down the crystallization process as much as possible, thereby prolong the shelf life, while improving the competitiveness of their products. The main topic is the generalization of factors influencing the crystallization process of bisphenol A-based and bisphenol F-based epoxy resins, the validation of new approaches to possibility of influencing their crystallization process, and the determination of possibility of using a certain degree of crystallinity of bisphenol A-based and bisphenol F-based epoxy resins when preparing and producing paint and coating systems based on the epoxy resins. Two types of the epoxy resins used, in particular, in formulations of paint and coating and other systems, namely: diglycidyl ether of bisphenol A (DGEBA) and diglycidyl ether of bisphenol F (DGEBF), were included into experiments. The tendency to crystallize not only for the pure epoxy resins, but also various mixtures with reactive diluents, fillers, etc. was determined according to the ISO 4895 Plastics – Liquid epoxy resins – Determination of tendency to crystallize. Further, the crystallinity of individual samples was determined. The effectiveness of potentially active nucleating agents such as precipitated calcium carbonate, DGEBA, and DGEBF crystals, etc. was selected and tested according to the ISO 4895 standard. The effectiveness of potentially active admixtures with crystallization retardation effect was selected and tested according to the ISO 4895 standard. Selected samples of the epoxy resins with a specified degree of crystallinity were cured with 3-aminomethyl-3,5,5-trimethylcyclohexylamine (IPD) based crosslinking agent. Mechanical parameters such as compressive strength, flexural strength were determined. The influence of crystallinity on selected mechanical parameters was observed.

Klíčová slova

floor coatings, crystallization, crystallinity, epoxy resin, nucleating agents.

Autoři

VYHNÁNKOVÁ, M.; HODUL, J.; BYDŽOVSKÝ, J.

Vydáno

23. 8. 2018

Nakladatel

Trans Tech Publications Ltd.

Místo

Switzerland

ISBN

978-3-0357-1361-9

Kniha

19th International Conference on Rehabilitation and Reconstruction of Building 2017

Edice

Michaela Kostelecká

ISSN

1013-9826

Periodikum

Key Engineering Materials (print)

Ročník

776

Stát

Švýcarská konfederace

Strany od

147

Strany do

152

Strany počet

6

URL

BibTex

@inproceedings{BUT142054,
  author="Michaela {Seidlová} and Jakub {Hodul} and Jiří {Bydžovský}",
  title="Issue of epoxy based coatings system crystallization and effect of partial crystallinity on mechanical parameters",
  booktitle="19th International Conference on Rehabilitation and Reconstruction of Building 2017",
  year="2018",
  series="Michaela Kostelecká",
  journal="Key Engineering Materials (print)",
  volume="776",
  pages="147--152",
  publisher="Trans Tech Publications Ltd.",
  address="Switzerland",
  doi="10.4028/www.scientific.net/KEM.776.147",
  isbn="978-3-0357-1361-9",
  issn="1013-9826",
  url="https://www.scientific.net/KEM.776.147"
}