Detail publikace

Vlastnosti spreje a rozložení tekutiny u víceotvorových trysek pro průmyslové hořáky

JEDELSKÝ, J. JÍCHA, M.

Originální název

Spray characteristics and liquid distribution of multi-hole effervescent atomisers for industrial burners

Český název

Vlastnosti spreje a rozložení tekutiny u víceotvorových trysek pro průmyslové hořáky

Anglický název

Spray characteristics and liquid distribution of multi-hole effervescent atomisers for industrial burners

Typ

článek v časopise

Jazyk

en

Originální abstrakt

The present paper provides an experimental study and optimization of multi-hole effervescent atomizers for industrial burners using oil-based fossil, bio- or waste fuels with prospects of emission reduction. Several multi-hole nozzles were designed based on our previous work. We probed the spray quality by Phase-Doppler anemometry. 3-D plots of Sauter mean diameter and mean droplet velocity demonstrate their spatial distribution within the spray. The effect of geometrical and operational factors on the spray is discussed. Droplet size–velocity correlations as well as the size and velocity distributions are presented, and differences are found against other investigations. A spray macrostructure is photographically observed and spray cone angles of the multi-hole nozzles are analysed. An internal two-phase flow is estimated using the Baker’s map for horizontal two-phase flow. Our previous two-phase flow visualizations suggested a liquid–gas gravitational separation when the multi-hole atomizer operated horizontally. This issue is addressed here; the results of spray heterogeneity measurements document that fuel flow rates through individual exit holes differ significantly. This difference spans between 0 and 70% depending on the nozzle design and flow regime. Effervescent sprays are unsteady under some operating conditions; spray unsteadiness was detected at low pressure and low gas-to-liquid-ratios.

Český abstrakt

Tato práce poskytuje experimentální data a optimalizaci víceotvorových trysek pro průmyslové hořáky na fosilní paliva na bázi oleje, bio- nebo odpadních paliva s cílem na snižování emisí.

Anglický abstrakt

The present paper provides an experimental study and optimization of multi-hole effervescent atomizers for industrial burners using oil-based fossil, bio- or waste fuels with prospects of emission reduction. Several multi-hole nozzles were designed based on our previous work. We probed the spray quality by Phase-Doppler anemometry. 3-D plots of Sauter mean diameter and mean droplet velocity demonstrate their spatial distribution within the spray. The effect of geometrical and operational factors on the spray is discussed. Droplet size–velocity correlations as well as the size and velocity distributions are presented, and differences are found against other investigations. A spray macrostructure is photographically observed and spray cone angles of the multi-hole nozzles are analysed. An internal two-phase flow is estimated using the Baker’s map for horizontal two-phase flow. Our previous two-phase flow visualizations suggested a liquid–gas gravitational separation when the multi-hole atomizer operated horizontally. This issue is addressed here; the results of spray heterogeneity measurements document that fuel flow rates through individual exit holes differ significantly. This difference spans between 0 and 70% depending on the nozzle design and flow regime. Effervescent sprays are unsteady under some operating conditions; spray unsteadiness was detected at low pressure and low gas-to-liquid-ratios.

Vydáno

05.03.2016

Nakladatel

Elsevier

Strany od

286

Strany do

296

Strany počet

11

URL

Plný text v Digitální knihovně

BibTex


@article{BUT120495,
  author="Jan {Jedelský} and Miroslav {Jícha}",
  title="Spray characteristics and liquid distribution of multi-hole effervescent atomisers for industrial burners",
  annote="The present paper provides an experimental study and optimization of multi-hole effervescent atomizers for industrial burners using oil-based fossil, bio- or waste fuels with prospects of emission reduction. Several multi-hole nozzles were designed based on our previous work. We probed the spray quality by Phase-Doppler anemometry. 3-D plots of Sauter mean diameter and mean droplet velocity demonstrate their spatial distribution within the spray. The effect of geometrical and operational factors on the spray is discussed. Droplet size–velocity correlations as well as the size and velocity distributions are presented, and differences are found against other investigations. A spray macrostructure is photographically observed and spray cone angles of the multi-hole nozzles are analysed. An internal two-phase flow is estimated using the Baker’s map for horizontal two-phase flow. Our previous two-phase flow visualizations suggested a liquid–gas gravitational separation when the multi-hole atomizer operated horizontally. This issue is addressed here; the results of spray heterogeneity measurements document that fuel flow rates through individual exit holes differ significantly. This difference spans between 0 and 70% depending on the nozzle design and flow regime. Effervescent sprays are unsteady under some operating conditions; spray unsteadiness was detected at low pressure and low gas-to-liquid-ratios.",
  address="Elsevier",
  chapter="120495",
  doi="10.1016/j.applthermaleng.2015.11.079",
  howpublished="print",
  institution="Elsevier",
  number="1",
  volume="96",
  year="2016",
  month="march",
  pages="286--296",
  publisher="Elsevier",
  type="journal article"
}