Detail publikace

Advantages of Combined Sintering Compared to Conventional Sintering of Mechanically Activated Magnesium Titanate

FILIPOVIĆ, S. OBRADOVIĆ, N. PAVLOVIĆ, V. KOSANOVIĆ, D. MITRIĆ, M. MITROVIĆ, N. POUCHLÝ, V. KACHLÍK, M. MACA, K.

Originální název

Advantages of Combined Sintering Compared to Conventional Sintering of Mechanically Activated Magnesium Titanate

Anglický název

Advantages of Combined Sintering Compared to Conventional Sintering of Mechanically Activated Magnesium Titanate

Jazyk

en

Originální abstrakt

In this article, the advantages of combined sintering in comparison with the conventional one, of mechanically activated magnesium titanate ceramic were investigated. The stoichiometric mixtures of MgO and TiO2 were mechano-chemically activated for 0, 10, 40, 80 and 160 minutes by ball milling and then isostatically pressed (CIP) to form green bodies. Conventional sintering was realized by heating up to 1400oC and hold for 30 minutes in air atmosphere. Resulting ceramic samples with closed porosity were post-sintered by pressure assisted technique Hot Isostatic Pressing (HIP) at 1280oC/3h in argon atmosphere with a pressure of 200 MPa. The best results were observed in the case of samples post-sintered by HIP, when single-phase MgTiO3 samples with relative density of 96% were prepared.

Anglický abstrakt

In this article, the advantages of combined sintering in comparison with the conventional one, of mechanically activated magnesium titanate ceramic were investigated. The stoichiometric mixtures of MgO and TiO2 were mechano-chemically activated for 0, 10, 40, 80 and 160 minutes by ball milling and then isostatically pressed (CIP) to form green bodies. Conventional sintering was realized by heating up to 1400oC and hold for 30 minutes in air atmosphere. Resulting ceramic samples with closed porosity were post-sintered by pressure assisted technique Hot Isostatic Pressing (HIP) at 1280oC/3h in argon atmosphere with a pressure of 200 MPa. The best results were observed in the case of samples post-sintered by HIP, when single-phase MgTiO3 samples with relative density of 96% were prepared.

Plný text v Digitální knihovně

Dokumenty

BibTex


@article{BUT112401,
  author="Suzana {Filipović} and Nina {Obradović} and Vladimir B. {Pavlović} and Darko {Kosanović} and Miodrag {Mitrić} and Nebojsa {Mitrović} and Václav {Pouchlý} and Martin {Kachlík} and Karel {Maca}",
  title="Advantages of Combined Sintering Compared to Conventional Sintering of Mechanically Activated Magnesium Titanate",
  annote="In this article, the advantages of combined sintering in comparison with the conventional one, of mechanically activated magnesium titanate ceramic were investigated. The stoichiometric mixtures of MgO and TiO2 were mechano-chemically activated for 0, 10, 40, 80 and 160 minutes by ball milling and then isostatically pressed (CIP) to form green bodies. Conventional sintering was realized by heating up to 1400oC and hold for 30 minutes in air atmosphere. Resulting ceramic samples with closed porosity were post-sintered by pressure assisted technique Hot Isostatic Pressing (HIP) at 1280oC/3h in argon atmosphere with a pressure of 200 MPa. The best results were observed in the case of samples post-sintered by HIP, when single-phase MgTiO3 samples with relative density of 96% were prepared.",
  address="International Institute for the Science of Sintering, Beograd",
  chapter="112401",
  doi="10.2298/SOS1403283F",
  howpublished="print",
  institution="International Institute for the Science of Sintering, Beograd",
  number="3",
  volume="46",
  year="2014",
  month="september",
  pages="283--290",
  publisher="International Institute for the Science of Sintering, Beograd",
  type="journal article in Web of Science"
}