Detail publikace

Detection of non-standard atmospheric effects in FSO systems

Originální název

Detection of non-standard atmospheric effects in FSO systems

Anglický název

Detection of non-standard atmospheric effects in FSO systems

Jazyk

en

Originální abstrakt

Modern free-space optical (FSO) communication systems in many aspects overcome wire or radio communications. They offer a license-free operation and a large bandwidth. Operation of outdoor FSO links struggles with many atmospheric phenomena that deteriorate phase and amplitude of the transmitted optical beam. Thanks to the recent advancing development, these effects are more or less well understood and described. Goal driven research increased the link availability. Besides increasing the availability of data links it is necessary to focus on the accuracy and reliability of testing optical links. Research of the data optical links is focused on the transmission of a large amount of data whereas the testing FSO link is designed to achieve maximal resolution and sensitivity thus improving accuracy and repeatability of the atmospheric effects measurement. Given the fact that testing links are located in the measured media, they are themselves influenced by it. Phenomena such as the condensation on transceiver windows (rain, frost) and the deviation of the optical beam path caused by the wind are referred to as non-standard effects. Non-standard effects never occur independently; therefore we must always verify the cross-sensitivity of the testing link. In the paper we respond to an increasing number of articles dealing with influence of the atmosphere on the link but ignoring the cross-sensitivity of the testing link on other variables than tested. In conclusion, we carry out qualitative and quantitative analysis of self-identified non-standard effects.

Anglický abstrakt

Modern free-space optical (FSO) communication systems in many aspects overcome wire or radio communications. They offer a license-free operation and a large bandwidth. Operation of outdoor FSO links struggles with many atmospheric phenomena that deteriorate phase and amplitude of the transmitted optical beam. Thanks to the recent advancing development, these effects are more or less well understood and described. Goal driven research increased the link availability. Besides increasing the availability of data links it is necessary to focus on the accuracy and reliability of testing optical links. Research of the data optical links is focused on the transmission of a large amount of data whereas the testing FSO link is designed to achieve maximal resolution and sensitivity thus improving accuracy and repeatability of the atmospheric effects measurement. Given the fact that testing links are located in the measured media, they are themselves influenced by it. Phenomena such as the condensation on transceiver windows (rain, frost) and the deviation of the optical beam path caused by the wind are referred to as non-standard effects. Non-standard effects never occur independently; therefore we must always verify the cross-sensitivity of the testing link. In the paper we respond to an increasing number of articles dealing with influence of the atmosphere on the link but ignoring the cross-sensitivity of the testing link on other variables than tested. In conclusion, we carry out qualitative and quantitative analysis of self-identified non-standard effects.

BibTex


@inproceedings{BUT102090,
  author="Otakar {Wilfert} and Juraj {Poliak} and Peter {Barcík} and José Luis {Arce-Diego} and Félix {Fanjul-Vélez} and Irene {Salas-García} and Noé {Ortega-Quijano}",
  title="Detection of non-standard atmospheric effects in FSO systems",
  annote="Modern free-space optical (FSO) communication systems in many aspects overcome wire or radio communications. They offer a license-free operation and a large bandwidth. Operation of outdoor FSO links struggles with many atmospheric phenomena that deteriorate phase and amplitude of the transmitted optical beam. Thanks to the recent advancing development, these effects are more or less well understood and described. Goal driven research increased the link availability.
Besides increasing the availability of data links it is necessary to focus on the accuracy and reliability of testing optical links. Research of the data optical links is focused on the transmission of a large amount of data whereas the testing FSO link is designed to achieve maximal resolution and sensitivity thus improving accuracy and repeatability of the atmospheric effects measurement. Given the fact that testing links are located in the measured media, they are themselves influenced by it. Phenomena such as the condensation on transceiver windows (rain, frost) and the deviation of the optical beam path caused by the wind are referred to as non-standard effects. Non-standard effects never occur independently; therefore we must always verify the cross-sensitivity of the testing link.
In the paper we respond to an increasing number of articles dealing with influence of the atmosphere on the link but ignoring the cross-sensitivity of the testing link on other variables than tested. In conclusion, we carry out qualitative and quantitative analysis of self-identified non-standard effects.",
  address="SPIE Press",
  booktitle="SPIE Optics & Photonics 2013 Conference on Laser Communication and Propagation through the Atmosphere and Oceans II",
  chapter="102090",
  doi="10.1117/12.2023207",
  howpublished="print",
  institution="SPIE Press",
  year="2013",
  month="august",
  pages="1--8",
  publisher="SPIE Press",
  type="conference paper"
}