Tensile properties of open cell ceramic foams

článek v časopise - ostatní, Jost

angličtina

Full understanding of response of highly porous (cellular) ceramic foams to different mechanical loadingconditions is important because of their potential use in industry, medical and other applications. A new technique for testing tensile strength of ceramic foam materials has been developed and first knowledge is described in the paper. Testing procedure consists of fixation of ceramic foam into aluminium pots by suitable adhesive. Alumina based ceramic foam material produced by Lanik (CZ) was used for the test methodology development. Samples were produced by polyurethane foam replication technique. Foams having 10 and 60 pores per linear inch (PPI) were tested. Basic fractographic analysis was carried out by scanning electron microscopy (SEM) to get corresponding figure about specimen behaviour during tensile loading. Influence of increasing PPI (decreasing cell size) on tensile strength of specimens was experimentally proven. With increasing PPI the tensile strength decreases. Slight dependence of tensile strength on sample size of examined material was observed in the range of the tested specimen dimensions. PDLLA-coated samples were alsoproduced and tested, exhibiting nearly 10 times higher tensile strength.

tension test, cellular materials, ceramics

BERTOLLA, L.; DLOUHÝ, I.; ŘEHOŘEK, L.; CHLUP, Z.

2013

23. 3. 2013

Hutnícka fakullta Technickej univerzity v Košiciach a SAV Košice

Košice

1338-1660

Acta metalurgica slovaca

2013(3)

1

Slovenská republika

106

113

8