Detail publikace

Low Cost Membrane Contactors Based on Hollow Fibres

Originální název

Low Cost Membrane Contactors Based on Hollow Fibres

Anglický název

Low Cost Membrane Contactors Based on Hollow Fibres

Jazyk

en

Originální abstrakt

Membrane contactors are used to solve different chemical engineering tasks (e.g. water saturation with gases). Such elements are traditionally used for bubble less oxidation of blood. However, their industrial applications are rather limited by their high investment costs. This is probably the main reason why membrane contactors are not used so widely, e.g. classical absorbers, etc. If potted bundles of hollow fibres are available, then it is a relatively simple task to design an ad hoc membrane contactor. However, it must be emphasised that to achieve the highest mass transfer efficiency requires a rather time-consuming tuning of each ad hoc designed contactor. To check the differences by water evaporation were aligned two modes, the water inside the hollow fibre membrane and fan air outside, next with the water outsides and flowing pressure air inside the membrane.

Anglický abstrakt

Membrane contactors are used to solve different chemical engineering tasks (e.g. water saturation with gases). Such elements are traditionally used for bubble less oxidation of blood. However, their industrial applications are rather limited by their high investment costs. This is probably the main reason why membrane contactors are not used so widely, e.g. classical absorbers, etc. If potted bundles of hollow fibres are available, then it is a relatively simple task to design an ad hoc membrane contactor. However, it must be emphasised that to achieve the highest mass transfer efficiency requires a rather time-consuming tuning of each ad hoc designed contactor. To check the differences by water evaporation were aligned two modes, the water inside the hollow fibre membrane and fan air outside, next with the water outsides and flowing pressure air inside the membrane.

Plný text v Digitální knihovně

Dokumenty

BibTex


@article{BUT93204,
  author="Mirko {Dohnal} and Tomáš {Veselý} and Miroslav {Raudenský}",
  title="Low Cost Membrane Contactors Based on Hollow Fibres",
  annote="Membrane contactors are used to solve different chemical engineering tasks (e.g. water saturation with gases). Such elements are traditionally used for bubble less oxidation of blood. However, their industrial applications are rather limited by their high investment costs. This is probably the main reason why membrane contactors are not used so widely, e.g. classical absorbers, etc. If potted bundles of hollow fibres are available, then it is a relatively simple task to design an ad hoc membrane contactor. However, it must be emphasised that to achieve the highest mass transfer efficiency requires a rather time-consuming tuning of each ad hoc designed contactor. To check the differences by water evaporation were aligned two modes, the water inside the hollow fibre membrane and fan air outside, next with the water outsides and flowing pressure air inside the membrane.",
  address="EDP Sciences",
  chapter="93204",
  doi="10.1051/epjconf/20122501009",
  institution="EDP Sciences",
  number="4",
  volume="25",
  year="2012",
  month="april",
  pages="1--10",
  publisher="EDP Sciences",
  type="journal article in Web of Science"
}